Class Period

The resulting period will have the specified years. The months and days units will be zero.

The resulting period will have the specified months. The years and days units will be zero.

The resulting period will be day-based, with the amount of days equal to the number of weeks multiplied by 7. The years and months units will be zero.

The resulting period will have the specified days. The years and months units will be zero.

This creates an instance based on years, months and days.

This obtains a period based on the specified amount. A TemporalAmount represents an amount of time, which may be date-based or time-based, which this factory extracts to a Period.

The conversion loops around the set of units from the amount and uses the YEARS, MONTHS and DAYS units to create a period. If any other units are found then an exception is thrown.

If the amount is a ChronoPeriod then it must use the ISO chronology.

This will parse the string produced by toString() which is based on the ISO-8601 period formats PnYnMnD and PnW.

The string starts with an optional sign, denoted by the ASCII negative or positive symbol. If negative, the whole period is negated. The ASCII letter "P" is next in upper or lower case. There are then four sections, each consisting of a number and a suffix. At least one of the four sections must be present. The sections have suffixes in ASCII of "Y", "M", "W" and "D" for years, months, weeks and days, accepted in upper or lower case. The suffixes must occur in order. The number part of each section must consist of ASCII digits. The number may be prefixed by the ASCII negative or positive symbol. The number must parse to an int.

The leading plus/minus sign, and negative values for other units are not part of the ISO-8601 standard. In addition, ISO-8601 does not permit mixing between the PnYnMnD and PnW formats. Any week-based input is multiplied by 7 and treated as a number of days.

For example, the following are valid inputs:

   "P2Y"             -- Period.ofYears(2)
   "P3M"             -- Period.ofMonths(3)
   "P4W"             -- Period.ofWeeks(4)
   "P5D"             -- Period.ofDays(5)
   "P1Y2M3D"         -- Period.of(1, 2, 3)
   "P1Y2M3W4D"       -- Period.of(1, 2, 25)
   "P-1Y2M"          -- Period.of(-1, 2, 0)
   "-P1Y2M"          -- Period.of(-1, -2, 0)
 

The start date is included, but the end date is not. The period is calculated by removing complete months, then calculating the remaining number of days, adjusting to ensure that both have the same sign. The number of months is then split into years and months based on a 12 month year. A month is considered if the end day-of-month is greater than or equal to the start day-of-month. For example, from 2010-01-15 to 2011-03-18 is one year, two months and three days.

The result of this method can be a negative period if the end is before the start. The negative sign will be the same in each of year, month and day.

This returns a value for each of the three supported units, YEARS, MONTHS and DAYS. All other units throw an exception.

The supported units are YEARS, MONTHS and DAYS. They are returned in the order years, months, days.

This set can be used in conjunction with get(TemporalUnit) to access the entire state of the period.

The Chronology represents the calendar system in use. The ISO-8601 calendar system is the modern civil calendar system used today in most of the world. It is equivalent to the proleptic Gregorian calendar system, in which today's rules for leap years are applied for all time.

A zero period has the value zero for the years, months and days units.

This checks whether the years, months or days units are less than zero.

This returns the years unit.

The months unit is not automatically normalized with the years unit. This means that a period of "15 months" is different to a period of "1 year and 3 months".

This returns the months unit.

The months unit is not automatically normalized with the years unit. This means that a period of "15 months" is different to a period of "1 year and 3 months".

This returns the days unit.

This sets the amount of the years unit in a copy of this period. The months and days units are unaffected.

The months unit is not automatically normalized with the years unit. This means that a period of "15 months" is different to a period of "1 year and 3 months".

This instance is immutable and unaffected by this method call.

This sets the amount of the months unit in a copy of this period. The years and days units are unaffected.

The months unit is not automatically normalized with the years unit. This means that a period of "15 months" is different to a period of "1 year and 3 months".

This instance is immutable and unaffected by this method call.

This sets the amount of the days unit in a copy of this period. The years and months units are unaffected.

This instance is immutable and unaffected by this method call.

This operates separately on the years, months and days. No normalization is performed.

For example, "1 year, 6 months and 3 days" plus "2 years, 2 months and 2 days" returns "3 years, 8 months and 5 days".

The specified amount is typically an instance of Period. Other types are interpreted using from(TemporalAmount).

This instance is immutable and unaffected by this method call.

This adds the amount to the years unit in a copy of this period. The months and days units are unaffected. For example, "1 year, 6 months and 3 days" plus 2 years returns "3 years, 6 months and 3 days".

This instance is immutable and unaffected by this method call.

This adds the amount to the months unit in a copy of this period. The years and days units are unaffected. For example, "1 year, 6 months and 3 days" plus 2 months returns "1 year, 8 months and 3 days".

This instance is immutable and unaffected by this method call.

This adds the amount to the days unit in a copy of this period. The years and months units are unaffected. For example, "1 year, 6 months and 3 days" plus 2 days returns "1 year, 6 months and 5 days".

This instance is immutable and unaffected by this method call.

This operates separately on the years, months and days. No normalization is performed.

For example, "1 year, 6 months and 3 days" minus "2 years, 2 months and 2 days" returns "-1 years, 4 months and 1 day".

The specified amount is typically an instance of Period. Other types are interpreted using from(TemporalAmount).

This instance is immutable and unaffected by this method call.

This subtracts the amount from the years unit in a copy of this period. The months and days units are unaffected. For example, "1 year, 6 months and 3 days" minus 2 years returns "-1 years, 6 months and 3 days".

This instance is immutable and unaffected by this method call.

This subtracts the amount from the months unit in a copy of this period. The years and days units are unaffected. For example, "1 year, 6 months and 3 days" minus 2 months returns "1 year, 4 months and 3 days".

This instance is immutable and unaffected by this method call.

This subtracts the amount from the days unit in a copy of this period. The years and months units are unaffected. For example, "1 year, 6 months and 3 days" minus 2 days returns "1 year, 6 months and 1 day".

This instance is immutable and unaffected by this method call.

This returns a period with each of the years, months and days units individually multiplied. For example, a period of "2 years, -3 months and 4 days" multiplied by 3 will return "6 years, -9 months and 12 days". No normalization is performed.

This returns a period with each of the years, months and days units individually negated. For example, a period of "2 years, -3 months and 4 days" will be negated to "-2 years, 3 months and -4 days". No normalization is performed.

This normalizes the years and months units, leaving the days unit unchanged. The months unit is adjusted to have an absolute value less than 12, with the years unit being adjusted to compensate. For example, a period of "1 Year and 15 months" will be normalized to "2 years and 3 months".

The sign of the years and months units will be the same after normalization. For example, a period of "1 year and -25 months" will be normalized to "-1 year and -1 month".

This instance is immutable and unaffected by this method call.

This returns the total number of months in the period by multiplying the number of years by 12 and adding the number of months.

This instance is immutable and unaffected by this method call.

This returns a temporal object of the same observable type as the input with this period added. If the temporal has a chronology, it must be the ISO chronology.

In most cases, it is clearer to reverse the calling pattern by using Temporal.plus(TemporalAmount).

   // these two lines are equivalent, but the second approach is recommended
   dateTime = thisPeriod.addTo(dateTime);
   dateTime = dateTime.plus(thisPeriod);
 

The calculation operates as follows. First, the chronology of the temporal is checked to ensure it is ISO chronology or null. Second, if the months are zero, the years are added if non-zero, otherwise the combination of years and months is added if non-zero. Finally, any days are added.

This approach ensures that a partial period can be added to a partial date. For example, a period of years and/or months can be added to a YearMonth, but a period including days cannot. The approach also adds years and months together when necessary, which ensures correct behaviour at the end of the month.

This instance is immutable and unaffected by this method call.

This returns a temporal object of the same observable type as the input with this period subtracted. If the temporal has a chronology, it must be the ISO chronology.

In most cases, it is clearer to reverse the calling pattern by using Temporal.minus(TemporalAmount).

   // these two lines are equivalent, but the second approach is recommended
   dateTime = thisPeriod.subtractFrom(dateTime);
   dateTime = dateTime.minus(thisPeriod);
 

The calculation operates as follows. First, the chronology of the temporal is checked to ensure it is ISO chronology or null. Second, if the months are zero, the years are subtracted if non-zero, otherwise the combination of years and months is subtracted if non-zero. Finally, any days are subtracted.

This approach ensures that a partial period can be subtracted from a partial date. For example, a period of years and/or months can be subtracted from a YearMonth, but a period including days cannot. The approach also subtracts years and months together when necessary, which ensures correct behaviour at the end of the month.

This instance is immutable and unaffected by this method call.

The comparison is based on the type Period and each of the three amounts. To be equal, the years, months and days units must be individually equal. Note that this means that a period of "15 Months" is not equal to a period of "1 Year and 3 Months".

The output will be in the ISO-8601 period format. A zero period will be represented as zero days, 'P0D'.