SliderJoint

Inherits: Joint < Spatial < Node < Object

Slider between two PhysicsBodies in 3D.

Description

Slides across the X axis of the pivot object. See also Generic6DOFJoint.

Properties

float	angular_limit/damping	0.0
float	angular_limit/lower_angle	0.0
float	angular_limit/restitution	0.7
float	angular_limit/softness	1.0
float	angular_limit/upper_angle	0.0
float	angular_motion/damping	1.0
float	angular_motion/restitution	0.7
float	angular_motion/softness	1.0
float	angular_ortho/damping	1.0
float	angular_ortho/restitution	0.7
float	angular_ortho/softness	1.0
float	linear_limit/damping	1.0
float	linear_limit/lower_distance	-1.0
float	linear_limit/restitution	0.7
float	linear_limit/softness	1.0
float	linear_limit/upper_distance	1.0
float	linear_motion/damping	0.0
float	linear_motion/restitution	0.7
float	linear_motion/softness	1.0
float	linear_ortho/damping	1.0
float	linear_ortho/restitution	0.7
float	linear_ortho/softness	1.0

Methods

float	get_param ( Param param ) const
void	set_param ( Param param, float value )

Enumerations

enum Param:

• PARAM_LINEAR_LIMIT_UPPER = 0 --- The maximum difference between the pivot points on their X axis before damping happens.
• PARAM_LINEAR_LIMIT_LOWER = 1 --- The minimum difference between the pivot points on their X axis before damping happens.
• PARAM_LINEAR_LIMIT_SOFTNESS = 2 --- A factor applied to the movement across the slider axis once the limits get surpassed. The lower, the slower the movement.
• PARAM_LINEAR_LIMIT_RESTITUTION = 3 --- The amount of restitution once the limits are surpassed. The lower, the more velocityenergy gets lost.
• PARAM_LINEAR_LIMIT_DAMPING = 4 --- The amount of damping once the slider limits are surpassed.
• PARAM_LINEAR_MOTION_SOFTNESS = 5 --- A factor applied to the movement across the slider axis as long as the slider is in the limits. The lower, the slower the movement.
• PARAM_LINEAR_MOTION_RESTITUTION = 6 --- The amount of restitution inside the slider limits.
• PARAM_LINEAR_MOTION_DAMPING = 7 --- The amount of damping inside the slider limits.
• PARAM_LINEAR_ORTHOGONAL_SOFTNESS = 8 --- A factor applied to the movement across axes orthogonal to the slider.
• PARAM_LINEAR_ORTHOGONAL_RESTITUTION = 9 --- The amount of restitution when movement is across axes orthogonal to the slider.
• PARAM_LINEAR_ORTHOGONAL_DAMPING = 10 --- The amount of damping when movement is across axes orthogonal to the slider.
• PARAM_ANGULAR_LIMIT_UPPER = 11 --- The upper limit of rotation in the slider.
• PARAM_ANGULAR_LIMIT_LOWER = 12 --- The lower limit of rotation in the slider.
• PARAM_ANGULAR_LIMIT_SOFTNESS = 13 --- A factor applied to the all rotation once the limit is surpassed.
• PARAM_ANGULAR_LIMIT_RESTITUTION = 14 --- The amount of restitution of the rotation when the limit is surpassed.
• PARAM_ANGULAR_LIMIT_DAMPING = 15 --- The amount of damping of the rotation when the limit is surpassed.
• PARAM_ANGULAR_MOTION_SOFTNESS = 16 --- A factor applied to the all rotation in the limits.
• PARAM_ANGULAR_MOTION_RESTITUTION = 17 --- The amount of restitution of the rotation in the limits.
• PARAM_ANGULAR_MOTION_DAMPING = 18 --- The amount of damping of the rotation in the limits.
• PARAM_ANGULAR_ORTHOGONAL_SOFTNESS = 19 --- A factor applied to the all rotation across axes orthogonal to the slider.
• PARAM_ANGULAR_ORTHOGONAL_RESTITUTION = 20 --- The amount of restitution of the rotation across axes orthogonal to the slider.
• PARAM_ANGULAR_ORTHOGONAL_DAMPING = 21 --- The amount of damping of the rotation across axes orthogonal to the slider.
• PARAM_MAX = 22 --- Represents the size of the Param enum.

Property Descriptions

float angular_limit/damping

Default	0.0
Setter	set_param(value)
Getter	get_param()

The amount of damping of the rotation when the limit is surpassed.

A lower damping value allows a rotation initiated by body A to travel to body B slower.

float angular_limit/lower_angle

Default

0.0

The lower limit of rotation in the slider.

float angular_limit/restitution

Default	0.7
Setter	set_param(value)
Getter	get_param()

The amount of restitution of the rotation when the limit is surpassed.

Does not affect damping.

float angular_limit/softness

Default	1.0
Setter	set_param(value)
Getter	get_param()

A factor applied to the all rotation once the limit is surpassed.

Makes all rotation slower when between 0 and 1.

float angular_limit/upper_angle

Default

0.0

The upper limit of rotation in the slider.

float angular_motion/damping

Default	1.0
Setter	set_param(value)
Getter	get_param()

The amount of damping of the rotation in the limits.

float angular_motion/restitution

Default	0.7
Setter	set_param(value)
Getter	get_param()

The amount of restitution of the rotation in the limits.

float angular_motion/softness

Default	1.0
Setter	set_param(value)
Getter	get_param()

A factor applied to the all rotation in the limits.

float angular_ortho/damping

Default	1.0
Setter	set_param(value)
Getter	get_param()

The amount of damping of the rotation across axes orthogonal to the slider.

float angular_ortho/restitution

Default	0.7
Setter	set_param(value)
Getter	get_param()

The amount of restitution of the rotation across axes orthogonal to the slider.

float angular_ortho/softness

Default	1.0
Setter	set_param(value)
Getter	get_param()

A factor applied to the all rotation across axes orthogonal to the slider.

float linear_limit/damping

Default	1.0
Setter	set_param(value)
Getter	get_param()

The amount of damping that happens once the limit defined by linear_limit/lower_distance and linear_limit/upper_distance is surpassed.

float linear_limit/lower_distance

Default	-1.0
Setter	set_param(value)
Getter	get_param()

The minimum difference between the pivot points on their X axis before damping happens.

float linear_limit/restitution

Default	0.7
Setter	set_param(value)
Getter	get_param()

The amount of restitution once the limits are surpassed. The lower, the more velocity-energy gets lost.

float linear_limit/softness

Default	1.0
Setter	set_param(value)
Getter	get_param()

A factor applied to the movement across the slider axis once the limits get surpassed. The lower, the slower the movement.

float linear_limit/upper_distance

Default	1.0
Setter	set_param(value)
Getter	get_param()

The maximum difference between the pivot points on their X axis before damping happens.

float linear_motion/damping

Default	0.0
Setter	set_param(value)
Getter	get_param()

The amount of damping inside the slider limits.

float linear_motion/restitution

Default	0.7
Setter	set_param(value)
Getter	get_param()

The amount of restitution inside the slider limits.

float linear_motion/softness

Default	1.0
Setter	set_param(value)
Getter	get_param()

A factor applied to the movement across the slider axis as long as the slider is in the limits. The lower, the slower the movement.

float linear_ortho/damping

Default	1.0
Setter	set_param(value)
Getter	get_param()

The amount of damping when movement is across axes orthogonal to the slider.

float linear_ortho/restitution

Default	0.7
Setter	set_param(value)
Getter	get_param()

The amount of restitution when movement is across axes orthogonal to the slider.

float linear_ortho/softness

Default	1.0
Setter	set_param(value)
Getter	get_param()

A factor applied to the movement across axes orthogonal to the slider.

Method Descriptions

float get_param ( Param param ) const

void set_param ( Param param, float value )