nxos_switchport - Manages Layer 2 switchport interfaces.

New in version 2.1.

DEPRECATED
Synopsis
Parameters
Notes
Examples
Return Values
Status
- Author

DEPRECATED

Removed in Ansible:
	version: 2.9
Why:	Replaced with generic version.
Alternative:	Use nxos_l2_interface instead.

Synopsis

Manages Layer 2 interfaces

Parameters

Parameter		Choices/Defaults	Comments
access_vlan		Default: None	If `mode=access`, used as the access VLAN ID.
interface required		Default: None	Full name of the interface, i.e. Ethernet1/1.
mode		Choices: access trunk Default: None	Mode for the Layer 2 port.
native_vlan		Default: None	If `mode=trunk`, used as the trunk native VLAN ID.
provider		Default: None	Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. This option is only required if you are using NX-API. For more information please see the NXOS Platform Options guide. A dict object containing connection details.
	username		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
	authorize (added in 2.5.3)	Choices: no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
	ssh_keyfile		Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	use_proxy (added in 2.5)	Choices: yes ← no	If `no`, the environment variables `http_proxy` and `https_proxy` will be ignored.
	auth_pass (added in 2.5.3)	Default: none	Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
	host required		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	timeout (added in 2.3)	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
	use_ssl	Choices: yes no ←	Configures the transport to use SSL if set to true only when the `transport=nxapi`, otherwise this value is ignored.
	password	Default: None	Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	validate_certs	Choices: yes no Default: None	If `no`, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
	port	Default: 0 (use common port)	Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
	transport required	Default: cli	Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
state		Choices: present ← absent unconfigured	Manage the state of the resource.
trunk_allowed_vlans (added in 2.2)		Default: None	if `mode=trunk`, these are the only VLANs that will be configured on the trunk, i.e. "2-10,15".
trunk_vlans		Default: None	If `mode=trunk`, used as the VLAN range to ADD or REMOVE from the trunk. aliases: trunk_add_vlans

Notes

Note

Tested against NXOSv 7.3.(0)D1(1) on VIRL
When state=absent, VLANs can be added/removed from trunk links and the existing access VLAN can be ‘unconfigured’ to just having VLAN 1 on that interface.
When working with trunks VLANs the keywords add/remove are always sent in the switchport trunk allowed vlan command. Use verbose mode to see commands sent.
When state=unconfigured, the interface will result with having a default Layer 2 interface, i.e. vlan 1 in access mode.
For information on using CLI and NX-API see the NXOS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples

- name: Ensure Eth1/5 is in its default switchport state
  nxos_switchport:
    interface: eth1/5
    state: unconfigured

- name: Ensure Eth1/5 is configured for access vlan 20
  nxos_switchport:
    interface: eth1/5
    mode: access
    access_vlan: 20

- name: Ensure Eth1/5 only has vlans 5-10 as trunk vlans
  nxos_switchport:
    interface: eth1/5
    mode: trunk
    native_vlan: 10
    trunk_vlans: 5-10

- name: Ensure eth1/5 is a trunk port and ensure 2-50 are being tagged (doesn't mean others aren't also being tagged)
  nxos_switchport:
    interface: eth1/5
    mode: trunk
    native_vlan: 10
    trunk_vlans: 2-50

- name: Ensure these VLANs are not being tagged on the trunk
  nxos_switchport:
    interface: eth1/5
    mode: trunk
    trunk_vlans: 51-4094
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list	always	command string sent to the device Sample: ['interface eth1/5', 'switchport access vlan 20']

Status

This module is flagged as deprecated and will be removed in version 2.9. For more information see DEPRECATED.

Author

Jason Edelman (@jedelman8)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.5/modules/nxos_switchport_module.html