bigip_gtm_facts - Collect facts from F5 BIG-IP GTM devices

Perform regex filter of response. Filtering is done on the name of the resource. Valid filters are anything that can be provided to Python's re module.

required

Fact category to collect.

required

The password for the user account used to connect to the BIG-IP. You can omit this option if the environment variable F5_PASSWORD is set.

aliases: pass, pwd

(added in 2.5)

None

A dict object containing connection details.

Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.

10

Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.

required

The BIG-IP host. You can omit this option if the environment variable F5_SERVER is set.

required

The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You can omit this option if the environment variable F5_USER is set.

443

The BIG-IP server port. You can omit this option if the environment variable F5_SERVER_PORT is set.

required

The password for the user account used to connect to the BIG-IP. You can omit this option if the environment variable F5_PASSWORD is set.

aliases: pass, pwd

If no, SSL certificates will not be validated. Use this only on personally controlled sites using self-signed certificates. You can omit this option if the environment variable F5_VALIDATE_CERTS is set.

required

Configures the transport connection to use when connecting to the remote device.

required

The BIG-IP host. You can omit this option if the environment variable F5_SERVER is set.

(added in 2.2)

443

The BIG-IP server port. You can omit this option if the environment variable F5_SERVER_PORT is set.

required

The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You can omit this option if the environment variable F5_USER is set.

(added in 2.0)

If no, SSL certificates will not be validated. Use this only on personally controlled sites using self-signed certificates. You can omit this option if the environment variable F5_VALIDATE_CERTS is set.

list

Contains the pool object status and enabled status.

{'pool': [{'verify_member_availability': 'disabled', 'partition': 'Common', 'qos_packet_rate': 1, 'qos_hit_ratio': 5, 'alternate_mode': 'round-robin', 'members': [{'ratio': 1, 'name': 'ok3.com', 'service': 80, 'member_order': 0, 'disabled': True, 'flags': 'a', 'preference': 10, 'order': 10, 'full_path': 'ok3.com'}], 'ttl': 30, 'enabled_state': 'disabled', 'qos_vs_score': 0, 'qos_topology': 0, 'load_balancing_mode': 'round-robin', 'max_answers_returned': 1, 'fallback_mode': 'return-to-dns', 'qos_rtt': 50, 'name': 'd3qw', 'qos_hops': 0, 'qos_kilobytes_second': 3, 'qos_lcs': 30, 'enabled': True, 'qos_vs_capacity': 0, 'availability_state': 'offline', 'manual_resume': 'disabled', 'full_path': '/Common/d3qw', 'type': 'naptr', 'dynamic_ratio': 'disabled'}]}

list

Contains the virtual server enabled and availability status, and address.

{'server': [{'product': 'single-bigip', 'virtual_servers': [{'limit_max_pps_status': 'disabled', 'name': 'jsdfhsd', 'destination': '10.10.10.10:0', 'enabled': True, 'translation_address': 'none', 'limit_max_pps': 0, 'limit_max_bps': 0, 'limit_max_bps_status': 'disabled', 'limit_max_connections': 0, 'limit_max_connections_status': 'disabled', 'full_path': 'jsdfhsd', 'translation_port': 0}], 'addresses': [{'translation': 'none', 'name': '10.10.10.10', 'device_name': '/Common/qweqwe'}], 'datacenter': '/Common/xfxgh', 'limit_cpu_usage': 0, 'expose_route_domains': False, 'virtual_server_discovery': 'disabled', 'iq_allow_snmp': True, 'iq_allow_service_check': True, 'limit_max_bps_status': 'disabled', 'limit_max_connections': 0, 'limit_cpu_usage_status': 'disabled', 'limit_max_pps_status': 'disabled', 'link_discovery': 'disabled', 'iq_allow_path': True, 'monitor': '/Common/bigip', 'limit_mem_avail_status': 'disabled', 'limit_mem_avail': 0, 'partition': 'Common', 'enabled': True, 'name': 'qweqwe', 'limit_max_pps': 0, 'limit_max_bps': 0, 'limit_max_connections_status': 'disabled', 'full_path': '/Common/qweqwe'}]}

list

Contains the lb method for the wide ip and the pools that are within the wide ip.

{'wide_ip': [{'pool_lb_mode': 'round-robin', 'last_resort_pool': '', 'persist_cidr_ipv4': 32, 'persist_cidr_ipv6': 128, 'name': 'foo.ok.com', 'failure_rcode_response': 'disabled', 'failure_rcode': 'noerror', 'partition': 'Common', 'enabled': True, 'failure_rcode_ttl': 0, 'ttl_persistence': 3600, 'full_path': '/Common/foo.ok.com', 'pools': [{'partition': 'Common', 'ratio': 1, 'name': 'd3qw', 'order': 0}], 'minimal_response': 'enabled', 'type': 'naptr', 'persistence': 'disabled'}]}