ios_l3_interface - Manage L3 interfaces on Cisco IOS network devices.

• Synopsis
• Parameters
• Notes
• Examples
• Return Values
• Status
  • Support
  • Author

Synopsis

• This module provides declarative management of L3 interfaces on IOS network devices.

Parameters

Notes

Examples

- name: Remove GigabitEthernet0/3 IPv4 and IPv6 address
  ios_l3_interface:
    name: GigabitEthernet0/3
    state: absent

- name: Set GigabitEthernet0/3 IPv4 address
  ios_l3_interface:
    name: GigabitEthernet0/3
    ipv4: 192.168.0.1/24

- name: Set GigabitEthernet0/3 IPv6 address
  ios_l3_interface:
    name: GigabitEthernet0/3
    ipv6: "fd5d:12c9:2201:1::1/64"

- name: Set GigabitEthernet0/3 in dhcp
  ios_l3_interface:
    name: GigabitEthernet0/3
    ipv4: dhcp
    ipv6: dhcp

- name: Set interface Vlan1 (SVI) IPv4 address
  ios_l3_interface:
    name: Vlan1
    ipv4: 192.168.0.5/24

- name: Set IP addresses on aggregate
  ios_l3_interface:
    aggregate:
      - { name: GigabitEthernet0/3, ipv4: 192.168.2.10/24 }
      - { name: GigabitEthernet0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }

- name: Remove IP addresses on aggregate
  ios_l3_interface:
    aggregate:
      - { name: GigabitEthernet0/3, ipv4: 192.168.2.10/24 }
      - { name: GigabitEthernet0/3, ipv4: 192.168.3.10/24, ipv6: "fd5d:12c9:2201:1::1/64" }
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Support

For more information about Red Hat’s support of this module, please refer to this Knowledge Base article

Author

• Ganesh Nalawade (@ganeshrn)