Data Type API

The standard array can have 24 different data types (and has some support for adding your own types). These data types all have an enumerated type, an enumerated type-character, and a corresponding array scalar Python type object (placed in a hierarchy). There are also standard C typedefs to make it easier to manipulate elements of the given data type. For the numeric types, there are also bit-width equivalent C typedefs and named typenumbers that make it easier to select the precision desired.

Enumerated Types

NPY_TYPES

There is a list of enumerated types defined providing the basic 24 data types plus some useful generic names. Whenever the code requires a type number, one of these enumerated types is requested. The types are all called NPY_{NAME}:

NPY_BOOL

The enumeration value for the boolean type, stored as one byte. It may only be set to the values 0 and 1.

NPY_BYTE

NPY_INT8

The enumeration value for an 8-bit/1-byte signed integer.

NPY_SHORT

NPY_INT16

The enumeration value for a 16-bit/2-byte signed integer.

NPY_INT

NPY_INT32

The enumeration value for a 32-bit/4-byte signed integer.

NPY_LONG

Equivalent to either NPY_INT or NPY_LONGLONG, depending on the platform.

NPY_LONGLONG

NPY_INT64

The enumeration value for a 64-bit/8-byte signed integer.

NPY_UBYTE

NPY_UINT8

The enumeration value for an 8-bit/1-byte unsigned integer.

NPY_USHORT

NPY_UINT16

The enumeration value for a 16-bit/2-byte unsigned integer.

NPY_UINT

NPY_UINT32

The enumeration value for a 32-bit/4-byte unsigned integer.

NPY_ULONG

Equivalent to either NPY_UINT or NPY_ULONGLONG, depending on the platform.

NPY_ULONGLONG

NPY_UINT64

The enumeration value for a 64-bit/8-byte unsigned integer.

NPY_HALF

NPY_FLOAT16

The enumeration value for a 16-bit/2-byte IEEE 754-2008 compatible floating point type.

NPY_FLOAT

NPY_FLOAT32

The enumeration value for a 32-bit/4-byte IEEE 754 compatible floating point type.

NPY_DOUBLE

NPY_FLOAT64

The enumeration value for a 64-bit/8-byte IEEE 754 compatible floating point type.

NPY_LONGDOUBLE

The enumeration value for a platform-specific floating point type which is at least as large as NPY_DOUBLE, but larger on many platforms.

NPY_CFLOAT

NPY_COMPLEX64

The enumeration value for a 64-bit/8-byte complex type made up of two NPY_FLOAT values.

NPY_CDOUBLE

NPY_COMPLEX128

The enumeration value for a 128-bit/16-byte complex type made up of two NPY_DOUBLE values.

NPY_CLONGDOUBLE

The enumeration value for a platform-specific complex floating point type which is made up of two NPY_LONGDOUBLE values.

NPY_DATETIME

The enumeration value for a data type which holds dates or datetimes with a precision based on selectable date or time units.

NPY_TIMEDELTA

The enumeration value for a data type which holds lengths of times in integers of selectable date or time units.

NPY_STRING

The enumeration value for ASCII strings of a selectable size. The strings have a fixed maximum size within a given array.

NPY_UNICODE

The enumeration value for UCS4 strings of a selectable size. The strings have a fixed maximum size within a given array.

NPY_OBJECT

The enumeration value for references to arbitrary Python objects.

NPY_VOID

Primarily used to hold struct dtypes, but can contain arbitrary binary data.

Some useful aliases of the above types are

NPY_INTP

The enumeration value for a signed integer type which is the same size as a (void *) pointer. This is the type used by all arrays of indices.

NPY_UINTP

The enumeration value for an unsigned integer type which is the same size as a (void *) pointer.

NPY_MASK

The enumeration value of the type used for masks, such as with the NPY_ITER_ARRAYMASK iterator flag. This is equivalent to NPY_UINT8.

NPY_DEFAULT_TYPE

The default type to use when no dtype is explicitly specified, for example when calling np.zero(shape). This is equivalent to NPY_DOUBLE.

Other useful related constants are

NPY_NTYPES

The total number of built-in NumPy types. The enumeration covers the range from 0 to NPY_NTYPES-1.

NPY_NOTYPE

A signal value guaranteed not to be a valid type enumeration number.

NPY_USERDEF

The start of type numbers used for Custom Data types.

The various character codes indicating certain types are also part of an enumerated list. References to type characters (should they be needed at all) should always use these enumerations. The form of them is NPY_{NAME}LTR where {NAME} can be

BOOL, BYTE, UBYTE, SHORT, USHORT, INT, UINT, LONG, ULONG, LONGLONG, ULONGLONG, HALF, FLOAT, DOUBLE, LONGDOUBLE, CFLOAT, CDOUBLE, CLONGDOUBLE, DATETIME, TIMEDELTA, OBJECT, STRING, VOID

INTP, UINTP

GENBOOL, SIGNED, UNSIGNED, FLOATING, COMPLEX

The latter group of {NAME}s corresponds to letters used in the array interface typestring specification.

Defines

Max and min values for integers

NPY_MAX_INT{bits}

NPY_MAX_UINT{bits}

NPY_MIN_INT{bits}

These are defined for {bits} = 8, 16, 32, 64, 128, and 256 and provide the maximum (minimum) value of the corresponding (unsigned) integer type. Note: the actual integer type may not be available on all platforms (i.e. 128-bit and 256-bit integers are rare).

NPY_MIN_{type}

This is defined for {type} = BYTE, SHORT, INT, LONG, LONGLONG, INTP

NPY_MAX_{type}

This is defined for all defined for {type} = BYTE, UBYTE, SHORT, USHORT, INT, UINT, LONG, ULONG, LONGLONG, ULONGLONG, INTP, UINTP

Number of bits in data types

All NPY_SIZEOF_{CTYPE} constants have corresponding NPY_BITSOF_{CTYPE} constants defined. The NPY_BITSOF_{CTYPE} constants provide the number of bits in the data type. Specifically, the available {CTYPE}s are

BOOL, CHAR, SHORT, INT, LONG, LONGLONG, FLOAT, DOUBLE, LONGDOUBLE

Bit-width references to enumerated typenums

All of the numeric data types (integer, floating point, and complex) have constants that are defined to be a specific enumerated type number. Exactly which enumerated type a bit-width type refers to is platform dependent. In particular, the constants available are PyArray_{NAME}{BITS} where {NAME} is INT, UINT, FLOAT, COMPLEX and {BITS} can be 8, 16, 32, 64, 80, 96, 128, 160, 192, 256, and 512. Obviously not all bit-widths are available on all platforms for all the kinds of numeric types. Commonly 8-, 16-, 32-, 64-bit integers; 32-, 64-bit floats; and 64-, 128-bit complex types are available.

Integer that can hold a pointer

The constants NPY_INTP and NPY_UINTP refer to an enumerated integer type that is large enough to hold a pointer on the platform. Index arrays should always be converted to NPY_INTP , because the dimension of the array is of type npy_intp.

C-type names

There are standard variable types for each of the numeric data types and the bool data type. Some of these are already available in the C-specification. You can create variables in extension code with these types.

Boolean

npy_bool

unsigned char; The constants NPY_FALSE and NPY_TRUE are also defined.

(Un)Signed Integer

Unsigned versions of the integers can be defined by pre-pending a ‘u’ to the front of the integer name.

npy_(u)byte

(unsigned) char

npy_short

short

npy_ushort

unsigned short

npy_uint

unsigned int

npy_int

int

npy_int16

16-bit integer

npy_uint16

16-bit unsigned integer

npy_int32

32-bit integer

npy_uint32

32-bit unsigned integer

npy_int64

64-bit integer

npy_uint64

64-bit unsigned integer

npy_(u)long

(unsigned) long int

npy_(u)longlong

(unsigned long long int)

npy_intp

Py_intptr_t (an integer that is the size of a pointer on the platform).

npy_uintp

unsigned Py_intptr_t (an integer that is the size of a pointer on the platform).

(Complex) Floating point

npy_half

16-bit float

npy_(c)float

32-bit float

npy_(c)double

64-bit double

npy_(c)longdouble

long double

complex types are structures with .real and .imag members (in that order).

Bit-width names

There are also typedefs for signed integers, unsigned integers, floating point, and complex floating point types of specific bit- widths. The available type names are

npy_int{bits}, npy_uint{bits}, npy_float{bits}, and npy_complex{bits}

where {bits} is the number of bits in the type and can be 8, 16, 32, 64, 128, and 256 for integer types; 16, 32 , 64, 80, 96, 128, and 256 for floating-point types; and 32, 64, 128, 160, 192, and 512 for complex-valued types. Which bit-widths are available is platform dependent. The bolded bit-widths are usually available on all platforms.

Printf Formatting

For help in printing, the following strings are defined as the correct format specifier in printf and related commands.

NPY_LONGLONG_FMT, NPY_ULONGLONG_FMT, NPY_INTP_FMT, NPY_UINTP_FMT, NPY_LONGDOUBLE_FMT