slxos_l2_interface – Manage Layer-2 interface on Extreme Networks SLX-OS devices

New in version 2.6.

Synopsis

  • This module provides declarative management of Layer-2 interface on Extreme slxos devices.

Parameters

Parameter Choices/Defaults Comments
access_vlan
-
Configure given VLAN in access port. If mode=access, used as the access VLAN ID.
aggregate
-
List of Layer-2 interface definitions.
mode
-
    Choices:
  • access ←
  • trunk
Mode in which interface needs to be configured.
name
- / required
Full name of the interface excluding any logical unit number, i.e. Ethernet 0/1.

aliases: interface
native_vlan
-
Native VLAN to be configured in trunk port. If mode=trunk, used as the trunk native VLAN ID.
state
-
    Choices:
  • present ←
  • absent
  • unconfigured
Manage the state of the Layer-2 Interface configuration.
trunk_allowed_vlans
-
List of allowed VLANs in a given trunk port. If mode=trunk, these are the only VLANs that will be configured on the trunk, i.e. "2-10,15".
trunk_vlans
-
List of VLANs to be configured in trunk port. If mode=trunk, used as the VLAN range to ADD or REMOVE from the trunk.

Examples

- name: Ensure Ethernet 0/5 is in its default l2 interface state
  slxos_l2_interface:
    name: Ethernet 0/5
    state: unconfigured

- name: Ensure Ethernet 0/5 is configured for access vlan 20
  slxos_l2_interface:
    name: Ethernet 0/5
    mode: access
    access_vlan: 20

- name: Ensure Ethernet 0/5 only has vlans 5-10 as trunk vlans
  slxos_l2_interface:
    name: Ethernet 0/5
    mode: trunk
    native_vlan: 10
    trunk_vlans: 5-10

- name: Ensure Ethernet 0/5 is a trunk port and ensure 2-50 are being tagged (doesn't mean others aren't also being tagged)
  slxos_l2_interface:
    name: Ethernet 0/5
    mode: trunk
    native_vlan: 10
    trunk_vlans: 2-50

- name: Ensure these VLANs are not being tagged on the trunk
  slxos_l2_interface:
    name: Ethernet 0/5
    mode: trunk
    trunk_vlans: 51-4094
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list
 always, except for the platforms that use Netconf transport to manage the device.
The list of configuration mode commands to send to the device

Sample:
['interface Ethernet 0/5', 'switchport access vlan 20']


Status

Authors

  • Matthew Stone (@bigmstone)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/slxos_l2_interface_module.html