fortios_system_interface – Configure interfaces in Fortinet’s FortiOS and FortiGate

New in version 2.8.

Synopsis

  • This module is able to configure a FortiGate or FortiOS by allowing the user to set and modify system feature and interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.2

Requirements

The below requirements are needed on the host that executes this module.

  • fortiosapi>=0.9.8

Parameters

Parameter Choices/Defaults Comments
host
- / required
FortiOS or FortiGate ip address.
https
boolean
    Choices:
  • no
  • yes
Indicates if the requests towards FortiGate must use HTTPS protocol
password
-
Default:
""
FortiOS or FortiGate password.
system_interface
-
Default:
null
Configure interfaces.
ac-name
-
PPPoE server name.
aggregate
-
Aggregate interface.
algorithm
-
    Choices:
  • L2
  • L3
  • L4
Frame distribution algorithm.
alias
-
Alias will be displayed with the interface name to make it easier to distinguish.
allowaccess
-
    Choices:
  • ping
  • https
  • ssh
  • snmp
  • http
  • telnet
  • fgfm
  • radius-acct
  • probe-response
  • capwap
  • ftm
Permitted types of management access to this interface.
ap-discover
-
    Choices:
  • enable
  • disable
Enable/disable automatic registration of unknown FortiAP devices.
arpforward
-
    Choices:
  • enable
  • disable
Enable/disable ARP forwarding.
auth-type
-
    Choices:
  • auto
  • pap
  • chap
  • mschapv1
  • mschapv2
PPP authentication type to use.
auto-auth-extension-device
-
    Choices:
  • enable
  • disable
Enable/disable automatic authorization of dedicated Fortinet extension device on this interface.
bfd
-
    Choices:
  • global
  • enable
  • disable
Bidirectional Forwarding Detection (BFD) settings.
bfd-desired-min-tx
-
BFD desired minimal transmit interval.
bfd-detect-mult
-
BFD detection multiplier.
bfd-required-min-rx
-
BFD required minimal receive interval.
broadcast-forticlient-discovery
-
    Choices:
  • enable
  • disable
Enable/disable broadcasting FortiClient discovery messages.
broadcast-forward
-
    Choices:
  • enable
  • disable
Enable/disable broadcast forwarding.
captive-portal
-
Enable/disable captive portal.
cli-conn-status
-
CLI connection status.
color
-
Color of icon on the GUI.
dedicated-to
-
    Choices:
  • none
  • management
Configure interface for single purpose.
defaultgw
-
    Choices:
  • enable
  • disable
Enable to get the gateway IP from the DHCP or PPPoE server.
description
-
Description.
detected-peer-mtu
-
MTU of detected peer (0 - 4294967295).
detectprotocol
-
    Choices:
  • ping
  • tcp-echo
  • udp-echo
Protocols used to detect the server.
detectserver
-
Gateway's ping server for this IP.
device-access-list
-
Device access list.
device-identification
-
    Choices:
  • enable
  • disable
Enable/disable passively gathering of device identity information about the devices on the network connected to this interface.
device-identification-active-scan
-
    Choices:
  • enable
  • disable
Enable/disable active gathering of device identity information about the devices on the network connected to this interface.
device-netscan
-
    Choices:
  • disable
  • enable
Enable/disable inclusion of devices detected on this interface in network vulnerability scans.
device-user-identification
-
    Choices:
  • enable
  • disable
Enable/disable passive gathering of user identity information about users on this interface.
devindex
-
Device Index.
dhcp-client-identifier
-
DHCP client identifier.
dhcp-relay-agent-option
-
    Choices:
  • enable
  • disable
Enable/disable DHCP relay agent option.
dhcp-relay-ip
-
DHCP relay IP address.
dhcp-relay-service
-
    Choices:
  • disable
  • enable
Enable/disable allowing this interface to act as a DHCP relay.
dhcp-relay-type
-
    Choices:
  • regular
  • ipsec
DHCP relay type (regular or IPsec).
dhcp-renew-time
-
DHCP renew time in seconds (300-604800), 0 means use the renew time provided by the server.
disc-retry-timeout
-
Time in seconds to wait before retrying to start a PPPoE discovery, 0 means no timeout.
disconnect-threshold
-
Time in milliseconds to wait before sending a notification that this interface is down or disconnected.
distance
-
Distance for routes learned through PPPoE or DHCP, lower distance indicates preferred route.
dns-server-override
-
    Choices:
  • enable
  • disable
Enable/disable use DNS acquired by DHCP or PPPoE.
drop-fragment
-
    Choices:
  • enable
  • disable
Enable/disable drop fragment packets.
drop-overlapped-fragment
-
    Choices:
  • enable
  • disable
Enable/disable drop overlapped fragment packets.
egress-shaping-profile
-
Outgoing traffic shaping profile.
endpoint-compliance
-
    Choices:
  • enable
  • disable
Enable/disable endpoint compliance enforcement.
estimated-downstream-bandwidth
-
Estimated maximum downstream bandwidth (kbps). Used to estimate link utilization.
estimated-upstream-bandwidth
-
Estimated maximum upstream bandwidth (kbps). Used to estimate link utilization.
explicit-ftp-proxy
-
    Choices:
  • enable
  • disable
Enable/disable the explicit FTP proxy on this interface.
explicit-web-proxy
-
    Choices:
  • enable
  • disable
Enable/disable the explicit web proxy on this interface.
external
-
    Choices:
  • enable
  • disable
Enable/disable identifying the interface as an external interface (which usually means it's connected to the Internet).
fail-action-on-extender
-
    Choices:
  • soft-restart
  • hard-restart
  • reboot
Action on extender when interface fail .
fail-alert-interfaces
-
Names of the FortiGate interfaces from which the link failure alert is sent for this interface.
name
- / required
Names of the physical interfaces belonging to the aggregate or redundant interface. Source system.interface.name.
fail-alert-method
-
    Choices:
  • link-failed-signal
  • link-down
Select link-failed-signal or link-down method to alert about a failed link.
fail-detect
-
    Choices:
  • enable
  • disable
Enable/disable fail detection features for this interface.
fail-detect-option
-
    Choices:
  • detectserver
  • link-down
Options for detecting that this interface has failed.
fortiheartbeat
-
    Choices:
  • enable
  • disable
Enable/disable FortiHeartBeat (FortiTelemetry on GUI).
fortilink
-
    Choices:
  • enable
  • disable
Enable FortiLink to dedicate this interface to manage other Fortinet devices.
fortilink-backup-link
-
fortilink split interface backup link.
fortilink-split-interface
-
    Choices:
  • enable
  • disable
Enable/disable FortiLink split interface to connect member link to different FortiSwitch in stack for uplink redundancy (maximum 2 interfaces in the "members" command).
fortilink-stacking
-
    Choices:
  • enable
  • disable
Enable/disable FortiLink switch-stacking on this interface.
forward-domain
-
Transparent mode forward domain.
gwdetect
-
    Choices:
  • enable
  • disable
Enable/disable detect gateway alive for first.
ha-priority
-
HA election priority for the PING server.
icmp-accept-redirect
-
    Choices:
  • enable
  • disable
Enable/disable ICMP accept redirect.
icmp-send-redirect
-
    Choices:
  • enable
  • disable
Enable/disable ICMP send redirect.
ident-accept
-
    Choices:
  • enable
  • disable
Enable/disable authentication for this interface.
idle-timeout
-
PPPoE auto disconnect after idle timeout seconds, 0 means no timeout.
inbandwidth
-
Bandwidth limit for incoming traffic (0 - 16776000 kbps), 0 means unlimited.
ingress-spillover-threshold
-
Ingress Spillover threshold (0 - 16776000 kbps).
interface
-
Interface name. Source system.interface.name.
internal
-
Implicitly created.
ip
-
Interface IPv4 address and subnet mask, syntax: X.X.X.X/24.
ipmac
-
    Choices:
  • enable
  • disable
Enable/disable IP/MAC binding.
ips-sniffer-mode
-
    Choices:
  • enable
  • disable
Enable/disable the use of this interface as a one-armed sniffer.
ipunnumbered
-
Unnumbered IP used for PPPoE interfaces for which no unique local address is provided.
ipv6
-
IPv6 of interface.
autoconf
-
    Choices:
  • enable
  • disable
Enable/disable address auto config.
dhcp6-client-options
-
    Choices:
  • rapid
  • iapd
  • iana
DHCPv6 client options.
dhcp6-information-request
-
    Choices:
  • enable
  • disable
Enable/disable DHCPv6 information request.
dhcp6-prefix-delegation
-
    Choices:
  • enable
  • disable
Enable/disable DHCPv6 prefix delegation.
dhcp6-prefix-hint
-
DHCPv6 prefix that will be used as a hint to the upstream DHCPv6 server.
dhcp6-prefix-hint-plt
-
DHCPv6 prefix hint preferred life time (sec), 0 means unlimited lease time.
dhcp6-prefix-hint-vlt
-
DHCPv6 prefix hint valid life time (sec).
dhcp6-relay-ip
-
DHCPv6 relay IP address.
dhcp6-relay-service
-
    Choices:
  • disable
  • enable
Enable/disable DHCPv6 relay.
dhcp6-relay-type
-
    Choices:
  • regular
DHCPv6 relay type.
ip6-address
-
Primary IPv6 address prefix, syntax: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/xxx
ip6-allowaccess
-
    Choices:
  • ping
  • https
  • ssh
  • snmp
  • http
  • telnet
  • fgfm
  • capwap
Allow management access to the interface.
ip6-default-life
-
Default life (sec).
ip6-delegated-prefix-list
-
Advertised IPv6 delegated prefix list.
autonomous-flag
-
    Choices:
  • enable
  • disable
Enable/disable the autonomous flag.
onlink-flag
-
    Choices:
  • enable
  • disable
Enable/disable the onlink flag.
prefix-id
- / required
Prefix ID.
rdnss
-
Recursive DNS server option.
rdnss-service
-
    Choices:
  • delegated
  • default
  • specify
Recursive DNS service option.
subnet
-
Add subnet ID to routing prefix.
upstream-interface
-
Name of the interface that provides delegated information. Source system.interface.name.
ip6-dns-server-override
-
    Choices:
  • enable
  • disable
Enable/disable using the DNS server acquired by DHCP.
ip6-extra-addr
-
Extra IPv6 address prefixes of interface.
prefix
- / required
IPv6 address prefix.
ip6-hop-limit
-
Hop limit (0 means unspecified).
ip6-link-mtu
-
IPv6 link MTU.
ip6-manage-flag
-
    Choices:
  • enable
  • disable
Enable/disable the managed flag.
ip6-max-interval
-
IPv6 maximum interval (4 to 1800 sec).
ip6-min-interval
-
IPv6 minimum interval (3 to 1350 sec).
ip6-mode
-
    Choices:
  • static
  • dhcp
  • pppoe
  • delegated
Addressing mode (static, DHCP, delegated).
ip6-other-flag
-
    Choices:
  • enable
  • disable
Enable/disable the other IPv6 flag.
ip6-prefix-list
-
Advertised prefix list.
autonomous-flag
-
    Choices:
  • enable
  • disable
Enable/disable the autonomous flag.
dnssl
-
DNS search list option.
domain
- / required
Domain name.
onlink-flag
-
    Choices:
  • enable
  • disable
Enable/disable the onlink flag.
preferred-life-time
-
Preferred life time (sec).
prefix
- / required
IPv6 prefix.
rdnss
-
Recursive DNS server option.
valid-life-time
-
Valid life time (sec).
ip6-reachable-time
-
IPv6 reachable time (milliseconds; 0 means unspecified).
ip6-retrans-time
-
IPv6 retransmit time (milliseconds; 0 means unspecified).
ip6-send-adv
-
    Choices:
  • enable
  • disable
Enable/disable sending advertisements about the interface.
ip6-subnet
-
Subnet to routing prefix, syntax: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/xxx
ip6-upstream-interface
-
Interface name providing delegated information. Source system.interface.name.
nd-cert
-
Neighbor discovery certificate. Source certificate.local.name.
nd-cga-modifier
-
Neighbor discovery CGA modifier.
nd-mode
-
    Choices:
  • basic
  • SEND-compatible
Neighbor discovery mode.
nd-security-level
-
Neighbor discovery security level (0 - 7; 0 = least secure, default = 0).
nd-timestamp-delta
-
Neighbor discovery timestamp delta value (1 - 3600 sec; default = 300).
nd-timestamp-fuzz
-
Neighbor discovery timestamp fuzz factor (1 - 60 sec; default = 1).
vrip6_link_local
-
Link-local IPv6 address of virtual router.
vrrp-virtual-mac6
-
    Choices:
  • enable
  • disable
Enable/disable virtual MAC for VRRP.
vrrp6
-
IPv6 VRRP configuration.
accept-mode
-
    Choices:
  • enable
  • disable
Enable/disable accept mode.
adv-interval
-
Advertisement interval (1 - 255 seconds).
preempt
-
    Choices:
  • enable
  • disable
Enable/disable preempt mode.
priority
-
Priority of the virtual router (1 - 255).
start-time
-
Startup time (1 - 255 seconds).
status
-
    Choices:
  • enable
  • disable
Enable/disable VRRP.
vrdst6
-
Monitor the route to this destination.
vrgrp
-
VRRP group ID (1 - 65535).
vrid
- / required
Virtual router identifier (1 - 255).
vrip6
-
IPv6 address of the virtual router.
l2forward
-
    Choices:
  • enable
  • disable
Enable/disable l2 forwarding.
lacp-ha-slave
-
    Choices:
  • enable
  • disable
LACP HA slave.
lacp-mode
-
    Choices:
  • static
  • passive
  • active
LACP mode.
lacp-speed
-
    Choices:
  • slow
  • fast
How often the interface sends LACP messages.
lcp-echo-interval
-
Time in seconds between PPPoE Link Control Protocol (LCP) echo requests.
lcp-max-echo-fails
-
Maximum missed LCP echo messages before disconnect.
link-up-delay
-
Number of milliseconds to wait before considering a link is up.
lldp-transmission
-
    Choices:
  • enable
  • disable
  • vdom
Enable/disable Link Layer Discovery Protocol (LLDP) transmission.
macaddr
-
Change the interface's MAC address.
managed-device
-
Available when FortiLink is enabled, used for managed devices through FortiLink interface.
name
- / required
Managed dev identifier.
management-ip
-
High Availability in-band management IP address of this interface.
member
-
Physical interfaces that belong to the aggregate or redundant interface.
interface-name
- / required
Physical interface name. Source system.interface.name.
min-links
-
Minimum number of aggregated ports that must be up.
min-links-down
-
    Choices:
  • operational
  • administrative
Action to take when less than the configured minimum number of links are active.
mode
-
    Choices:
  • static
  • dhcp
  • pppoe
Addressing mode (static, DHCP, PPPoE).
mtu
-
MTU value for this interface.
mtu-override
-
    Choices:
  • enable
  • disable
Enable to set a custom MTU for this interface.
name
- / required
Name.
ndiscforward
-
    Choices:
  • enable
  • disable
Enable/disable NDISC forwarding.
netbios-forward
-
    Choices:
  • disable
  • enable
Enable/disable NETBIOS forwarding.
netflow-sampler
-
    Choices:
  • disable
  • tx
  • rx
  • both
Enable/disable NetFlow on this interface and set the data that NetFlow collects (rx, tx, or both).
outbandwidth
-
Bandwidth limit for outgoing traffic (0 - 16776000 kbps).
padt-retry-timeout
-
PPPoE Active Discovery Terminate (PADT) used to terminate sessions after an idle time.
password
-
PPPoE account's password.
ping-serv-status
-
PING server status.
polling-interval
-
sFlow polling interval (1 - 255 sec).
pppoe-unnumbered-negotiate
-
    Choices:
  • enable
  • disable
Enable/disable PPPoE unnumbered negotiation.
pptp-auth-type
-
    Choices:
  • auto
  • pap
  • chap
  • mschapv1
  • mschapv2
PPTP authentication type.
pptp-client
-
    Choices:
  • enable
  • disable
Enable/disable PPTP client.
pptp-password
-
PPTP password.
pptp-server-ip
-
PPTP server IP address.
pptp-timeout
-
Idle timer in minutes (0 for disabled).
pptp-user
-
PPTP user name.
preserve-session-route
-
    Choices:
  • enable
  • disable
Enable/disable preservation of session route when dirty.
priority
-
Priority of learned routes.
priority-override
-
    Choices:
  • enable
  • disable
Enable/disable fail back to higher priority port once recovered.
proxy-captive-portal
-
    Choices:
  • enable
  • disable
Enable/disable proxy captive portal on this interface.
redundant-interface
-
Redundant interface.
remote-ip
-
Remote IP address of tunnel.
replacemsg-override-group
-
Replacement message override group.
role
-
    Choices:
  • lan
  • wan
  • dmz
  • undefined
Interface role.
sample-direction
-
    Choices:
  • tx
  • rx
  • both
Data that NetFlow collects (rx, tx, or both).
sample-rate
-
sFlow sample rate (10 - 99999).
scan-botnet-connections
-
    Choices:
  • disable
  • block
  • monitor
Enable monitoring or blocking connections to Botnet servers through this interface.
secondary-IP
-
    Choices:
  • enable
  • disable
Enable/disable adding a secondary IP to this interface.
secondaryip
-
Second IP address of interface.
allowaccess
-
    Choices:
  • ping
  • https
  • ssh
  • snmp
  • http
  • telnet
  • fgfm
  • radius-acct
  • probe-response
  • capwap
  • ftm
Management access settings for the secondary IP address.
detectprotocol
-
    Choices:
  • ping
  • tcp-echo
  • udp-echo
Protocols used to detect the server.
detectserver
-
Gateway's ping server for this IP.
gwdetect
-
    Choices:
  • enable
  • disable
Enable/disable detect gateway alive for first.
ha-priority
-
HA election priority for the PING server.
id
- / required
ID.
ip
-
Secondary IP address of the interface.
ping-serv-status
-
PING server status.
security-exempt-list
-
Name of security-exempt-list.
security-external-logout
-
URL of external authentication logout server.
security-external-web
-
URL of external authentication web server.
security-groups
-
User groups that can authenticate with the captive portal.
name
- / required
Names of user groups that can authenticate with the captive portal.
security-mac-auth-bypass
-
    Choices:
  • enable
  • disable
Enable/disable MAC authentication bypass.
security-mode
-
    Choices:
  • none
  • captive-portal
  • 802.1X
Turn on captive portal authentication for this interface.
security-redirect-url
-
URL redirection after disclaimer/authentication.
service-name
-
PPPoE service name.
sflow-sampler
-
    Choices:
  • enable
  • disable
Enable/disable sFlow on this interface.
snmp-index
-
Permanent SNMP Index of the interface.
speed
-
    Choices:
  • auto
  • 10full
  • 10half
  • 100full
  • 100half
  • 1000full
  • 1000half
  • 1000auto
Interface speed. The default setting and the options available depend on the interface hardware.
spillover-threshold
-
Egress Spillover threshold (0 - 16776000 kbps), 0 means unlimited.
src-check
-
    Choices:
  • enable
  • disable
Enable/disable source IP check.
state
-
    Choices:
  • present
  • absent
Indicates whether to create or remove the object
status
-
    Choices:
  • up
  • down
Bring the interface up or shut the interface down.
stpforward
-
    Choices:
  • enable
  • disable
Enable/disable STP forwarding.
stpforward-mode
-
    Choices:
  • rpl-all-ext-id
  • rpl-bridge-ext-id
  • rpl-nothing
Configure STP forwarding mode.
subst
-
    Choices:
  • enable
  • disable
Enable to always send packets from this interface to a destination MAC address.
substitute-dst-mac
-
Destination MAC address that all packets are sent to from this interface.
switch
-
Contained in switch.
switch-controller-access-vlan
-
    Choices:
  • enable
  • disable
Block FortiSwitch port-to-port traffic.
switch-controller-arp-inspection
-
    Choices:
  • enable
  • disable
Enable/disable FortiSwitch ARP inspection.
switch-controller-dhcp-snooping
-
    Choices:
  • enable
  • disable
Switch controller DHCP snooping.
switch-controller-dhcp-snooping-option82
-
    Choices:
  • enable
  • disable
Switch controller DHCP snooping option82.
switch-controller-dhcp-snooping-verify-mac
-
    Choices:
  • enable
  • disable
Switch controller DHCP snooping verify MAC.
switch-controller-igmp-snooping
-
    Choices:
  • enable
  • disable
Switch controller IGMP snooping.
switch-controller-learning-limit
-
Limit the number of dynamic MAC addresses on this VLAN (1 - 128, 0 = no limit, default).
tagging
-
Config object tagging.
category
-
Tag category. Source system.object-tagging.category.
name
- / required
Tagging entry name.
tags
-
Tags.
name
- / required
Tag name. Source system.object-tagging.tags.name.
tcp-mss
-
TCP maximum segment size. 0 means do not change segment size.
trust-ip-1
-
Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).
trust-ip-2
-
Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).
trust-ip-3
-
Trusted host for dedicated management traffic (0.0.0.0/24 for all hosts).
trust-ip6-1
-
Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).
trust-ip6-2
-
Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).
trust-ip6-3
-
Trusted IPv6 host for dedicated management traffic (::/0 for all hosts).
type
-
    Choices:
  • physical
  • vlan
  • aggregate
  • redundant
  • tunnel
  • vdom-link
  • loopback
  • switch
  • hard-switch
  • vap-switch
  • wl-mesh
  • fext-wan
  • vxlan
  • hdlc
  • switch-vlan
Interface type.
username
-
Username of the PPPoE account, provided by your ISP.
vdom
-
Interface is in this virtual domain (VDOM). Source system.vdom.name.
vindex
-
Switch control interface VLAN ID.
vlanforward
-
    Choices:
  • enable
  • disable
Enable/disable traffic forwarding between VLANs on this interface.
vlanid
-
VLAN ID (1 - 4094).
vrf
-
Virtual Routing Forwarding ID.
vrrp
-
VRRP configuration.
accept-mode
-
    Choices:
  • enable
  • disable
Enable/disable accept mode.
adv-interval
-
Advertisement interval (1 - 255 seconds).
preempt
-
    Choices:
  • enable
  • disable
Enable/disable preempt mode.
priority
-
Priority of the virtual router (1 - 255).
proxy-arp
-
VRRP Proxy ARP configuration.
id
- / required
ID.
ip
-
Set IP addresses of proxy ARP.
start-time
-
Startup time (1 - 255 seconds).
status
-
    Choices:
  • enable
  • disable
Enable/disable this VRRP configuration.
version
-
    Choices:
  • 2
  • 3
VRRP version.
vrdst
-
Monitor the route to this destination.
vrdst-priority
-
Priority of the virtual router when the virtual router destination becomes unreachable (0 - 254).
vrgrp
-
VRRP group ID (1 - 65535).
vrid
- / required
Virtual router identifier (1 - 255).
vrip
-
IP address of the virtual router.
vrrp-virtual-mac
-
    Choices:
  • enable
  • disable
Enable/disable use of virtual MAC for VRRP.
wccp
-
    Choices:
  • enable
  • disable
Enable/disable WCCP on this interface. Used for encapsulated WCCP communication between WCCP clients and servers.
weight
-
Default weight for static routes (if route has no weight configured).
wins-ip
-
WINS server IP.
username
- / required
FortiOS or FortiGate username.
vdom
-
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

  • Requires fortiosapi library developed by Fortinet
  • Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
  tasks:
  - name: Configure interfaces.
    fortios_system_interface:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      system_interface:
        state: "present"
        ac-name: "<your_own_value>"
        aggregate: "<your_own_value>"
        algorithm: "L2"
        alias: "<your_own_value>"
        allowaccess: "ping"
        ap-discover: "enable"
        arpforward: "enable"
        auth-type: "auto"
        auto-auth-extension-device: "enable"
        bfd: "global"
        bfd-desired-min-tx: "13"
        bfd-detect-mult: "14"
        bfd-required-min-rx: "15"
        broadcast-forticlient-discovery: "enable"
        broadcast-forward: "enable"
        captive-portal: "18"
        cli-conn-status: "19"
        color: "20"
        dedicated-to: "none"
        defaultgw: "enable"
        description: "<your_own_value>"
        detected-peer-mtu: "24"
        detectprotocol: "ping"
        detectserver: "<your_own_value>"
        device-access-list: "<your_own_value>"
        device-identification: "enable"
        device-identification-active-scan: "enable"
        device-netscan: "disable"
        device-user-identification: "enable"
        devindex: "32"
        dhcp-client-identifier:  "myId_33"
        dhcp-relay-agent-option: "enable"
        dhcp-relay-ip: "<your_own_value>"
        dhcp-relay-service: "disable"
        dhcp-relay-type: "regular"
        dhcp-renew-time: "38"
        disc-retry-timeout: "39"
        disconnect-threshold: "40"
        distance: "41"
        dns-server-override: "enable"
        drop-fragment: "enable"
        drop-overlapped-fragment: "enable"
        egress-shaping-profile: "<your_own_value>"
        endpoint-compliance: "enable"
        estimated-downstream-bandwidth: "47"
        estimated-upstream-bandwidth: "48"
        explicit-ftp-proxy: "enable"
        explicit-web-proxy: "enable"
        external: "enable"
        fail-action-on-extender: "soft-restart"
        fail-alert-interfaces:
         -
            name: "default_name_54 (source system.interface.name)"
        fail-alert-method: "link-failed-signal"
        fail-detect: "enable"
        fail-detect-option: "detectserver"
        fortiheartbeat: "enable"
        fortilink: "enable"
        fortilink-backup-link: "60"
        fortilink-split-interface: "enable"
        fortilink-stacking: "enable"
        forward-domain: "63"
        gwdetect: "enable"
        ha-priority: "65"
        icmp-accept-redirect: "enable"
        icmp-send-redirect: "enable"
        ident-accept: "enable"
        idle-timeout: "69"
        inbandwidth: "70"
        ingress-spillover-threshold: "71"
        interface: "<your_own_value> (source system.interface.name)"
        internal: "73"
        ip: "<your_own_value>"
        ipmac: "enable"
        ips-sniffer-mode: "enable"
        ipunnumbered: "<your_own_value>"
        ipv6:
            autoconf: "enable"
            dhcp6-client-options: "rapid"
            dhcp6-information-request: "enable"
            dhcp6-prefix-delegation: "enable"
            dhcp6-prefix-hint: "<your_own_value>"
            dhcp6-prefix-hint-plt: "84"
            dhcp6-prefix-hint-vlt: "85"
            dhcp6-relay-ip: "<your_own_value>"
            dhcp6-relay-service: "disable"
            dhcp6-relay-type: "regular"
            ip6-address: "<your_own_value>"
            ip6-allowaccess: "ping"
            ip6-default-life: "91"
            ip6-delegated-prefix-list:
             -
                autonomous-flag: "enable"
                onlink-flag: "enable"
                prefix-id: "95"
                rdnss: "<your_own_value>"
                rdnss-service: "delegated"
                subnet: "<your_own_value>"
                upstream-interface: "<your_own_value> (source system.interface.name)"
            ip6-dns-server-override: "enable"
            ip6-extra-addr:
             -
                prefix: "<your_own_value>"
            ip6-hop-limit: "103"
            ip6-link-mtu: "104"
            ip6-manage-flag: "enable"
            ip6-max-interval: "106"
            ip6-min-interval: "107"
            ip6-mode: "static"
            ip6-other-flag: "enable"
            ip6-prefix-list:
             -
                autonomous-flag: "enable"
                dnssl:
                 -
                    domain: "<your_own_value>"
                onlink-flag: "enable"
                preferred-life-time: "115"
                prefix: "<your_own_value>"
                rdnss: "<your_own_value>"
                valid-life-time: "118"
            ip6-reachable-time: "119"
            ip6-retrans-time: "120"
            ip6-send-adv: "enable"
            ip6-subnet: "<your_own_value>"
            ip6-upstream-interface: "<your_own_value> (source system.interface.name)"
            nd-cert: "<your_own_value> (source certificate.local.name)"
            nd-cga-modifier: "<your_own_value>"
            nd-mode: "basic"
            nd-security-level: "127"
            nd-timestamp-delta: "128"
            nd-timestamp-fuzz: "129"
            vrip6_link_local: "<your_own_value>"
            vrrp-virtual-mac6: "enable"
            vrrp6:
             -
                accept-mode: "enable"
                adv-interval: "134"
                preempt: "enable"
                priority: "136"
                start-time: "137"
                status: "enable"
                vrdst6: "<your_own_value>"
                vrgrp: "140"
                vrid: "141"
                vrip6: "<your_own_value>"
        l2forward: "enable"
        lacp-ha-slave: "enable"
        lacp-mode: "static"
        lacp-speed: "slow"
        lcp-echo-interval: "147"
        lcp-max-echo-fails: "148"
        link-up-delay: "149"
        lldp-transmission: "enable"
        macaddr: "<your_own_value>"
        managed-device:
         -
            name: "default_name_153"
        management-ip: "<your_own_value>"
        member:
         -
            interface-name: "<your_own_value> (source system.interface.name)"
        min-links: "157"
        min-links-down: "operational"
        mode: "static"
        mtu: "160"
        mtu-override: "enable"
        name: "default_name_162"
        ndiscforward: "enable"
        netbios-forward: "disable"
        netflow-sampler: "disable"
        outbandwidth: "166"
        padt-retry-timeout: "167"
        password: "<your_own_value>"
        ping-serv-status: "169"
        polling-interval: "170"
        pppoe-unnumbered-negotiate: "enable"
        pptp-auth-type: "auto"
        pptp-client: "enable"
        pptp-password: "<your_own_value>"
        pptp-server-ip: "<your_own_value>"
        pptp-timeout: "176"
        pptp-user: "<your_own_value>"
        preserve-session-route: "enable"
        priority: "179"
        priority-override: "enable"
        proxy-captive-portal: "enable"
        redundant-interface: "<your_own_value>"
        remote-ip: "<your_own_value>"
        replacemsg-override-group: "<your_own_value>"
        role: "lan"
        sample-direction: "tx"
        sample-rate: "187"
        scan-botnet-connections: "disable"
        secondary-IP: "enable"
        secondaryip:
         -
            allowaccess: "ping"
            detectprotocol: "ping"
            detectserver: "<your_own_value>"
            gwdetect: "enable"
            ha-priority: "195"
            id:  "196"
            ip: "<your_own_value>"
            ping-serv-status: "198"
        security-exempt-list: "<your_own_value>"
        security-external-logout: "<your_own_value>"
        security-external-web: "<your_own_value>"
        security-groups:
         -
            name: "default_name_203"
        security-mac-auth-bypass: "enable"
        security-mode: "none"
        security-redirect-url: "<your_own_value>"
        service-name: "<your_own_value>"
        sflow-sampler: "enable"
        snmp-index: "209"
        speed: "auto"
        spillover-threshold: "211"
        src-check: "enable"
        status: "up"
        stpforward: "enable"
        stpforward-mode: "rpl-all-ext-id"
        subst: "enable"
        substitute-dst-mac: "<your_own_value>"
        switch: "<your_own_value>"
        switch-controller-access-vlan: "enable"
        switch-controller-arp-inspection: "enable"
        switch-controller-dhcp-snooping: "enable"
        switch-controller-dhcp-snooping-option82: "enable"
        switch-controller-dhcp-snooping-verify-mac: "enable"
        switch-controller-igmp-snooping: "enable"
        switch-controller-learning-limit: "225"
        tagging:
         -
            category: "<your_own_value> (source system.object-tagging.category)"
            name: "default_name_228"
            tags:
             -
                name: "default_name_230 (source system.object-tagging.tags.name)"
        tcp-mss: "231"
        trust-ip-1: "<your_own_value>"
        trust-ip-2: "<your_own_value>"
        trust-ip-3: "<your_own_value>"
        trust-ip6-1: "<your_own_value>"
        trust-ip6-2: "<your_own_value>"
        trust-ip6-3: "<your_own_value>"
        type: "physical"
        username: "<your_own_value>"
        vdom: "<your_own_value> (source system.vdom.name)"
        vindex: "241"
        vlanforward: "enable"
        vlanid: "243"
        vrf: "244"
        vrrp:
         -
            accept-mode: "enable"
            adv-interval: "247"
            preempt: "enable"
            priority: "249"
            proxy-arp:
             -
                id:  "251"
                ip: "<your_own_value>"
            start-time: "253"
            status: "enable"
            version: "2"
            vrdst: "<your_own_value>"
            vrdst-priority: "257"
            vrgrp: "258"
            vrid: "259"
            vrip: "<your_own_value>"
        vrrp-virtual-mac: "enable"
        wccp: "enable"
        weight: "263"
        wins-ip: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Status

Authors

  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/fortios_system_interface_module.html