bigip_monitor_ldap – Manages BIG-IP LDAP monitors
New in version 2.8.
Synopsis
- Manages BIG-IP LDAP monitors.
Parameters
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| base string | Specifies the location in the LDAP tree from which the monitor starts the health check. | ||
| chase_referrals boolean |
| Specifies whether, upon receipt of an LDAP referral entry, the target follows (or chases) that referral. | |
| debug boolean |
| Specifies whether the monitor sends error messages and additional information to a log file created and labeled specifically for this monitor. | |
| description string | Specifies descriptive text that identifies the monitor. | ||
| filter string | Specifies an LDAP key for which the monitor searches. | ||
| interval integer | Specifies, in seconds, the frequency at which the system issues the monitor check when either the resource is down or the status of the resource is unknown. | ||
| ip string | IP address part of the IP/port definition. If this parameter is not provided when creating a new monitor, then the default value will be '*'. | ||
| mandatory_attributes boolean |
| Specifies whether the target must include attributes in its response to be considered up. | |
| manual_resume boolean |
| Specifies whether the system automatically changes the status of a resource to enabled at the next successful monitor check. If you set this option to yes, you must manually re-enable the resource before the system can use it for load balancing connections.When yes, specifies that you must manually re-enable the resource after an unsuccessful monitor check.When no, specifies that the system automatically changes the status of a resource to enabled at the next successful monitor check. | |
| name string / required | Monitor name. | ||
| parent string | Default: "/Common/ldap" | The parent template of this monitor template. Once this value has been set, it cannot be changed. By default, this value is the ldap parent on the Common partition. | |
| partition string | Default: "Common" | Device partition to manage resources on. | |
| password string / required | The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable F5_PASSWORD.aliases: pass, pwd | ||
| port string | Port address part of the IP/port definition. If this parameter is not provided when creating a new monitor, then the default value will be '*'. Note that if specifying an IP address, a value between 1 and 65535 must be specified. | ||
| provider dictionary added in 2.5 | A dict object containing connection details. | ||
| password string / required | The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable F5_PASSWORD.aliases: pass, pwd | ||
| server string / required | The BIG-IP host. You may omit this option by setting the environment variable F5_SERVER. | ||
| server_port integer | Default: 443 | The BIG-IP server port. You may omit this option by setting the environment variable F5_SERVER_PORT. | |
| ssh_keyfile path | Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable ANSIBLE_NET_SSH_KEYFILE. | ||
| timeout integer | Default: 10 | Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. | |
| transport string |
| Configures the transport connection to use when connecting to the remote device. | |
| user string / required | The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable F5_USER. | ||
| validate_certs boolean |
| If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.You may omit this option by setting the environment variable F5_VALIDATE_CERTS. | |
| security string |
| Specifies the secure protocol type for communications with the target. | |
| server string / required | The BIG-IP host. You may omit this option by setting the environment variable F5_SERVER. | ||
| server_port integer added in 2.2 | Default: 443 | The BIG-IP server port. You may omit this option by setting the environment variable F5_SERVER_PORT. | |
| state string |
| When present, ensures that the monitor exists.When absent, ensures the monitor is removed. | |
| target_password string | Specifies the password, if the monitored target requires authentication. | ||
| target_username string | Specifies the user name, if the monitored target requires authentication. | ||
| time_until_up integer | Specifies the number of seconds to wait after a resource first responds correctly to the monitor before setting the resource to 'up'. During the interval, all responses from the resource must be correct. When the interval expires, the resource is marked 'up'. A value of 0, means that the resource is marked up immediately upon receipt of the first correct response. | ||
| timeout integer | Specifies the number of seconds the target has in which to respond to the monitor request. If the target responds within the set time period, it is considered 'up'. If the target does not respond within the set time period, it is considered 'down'. When this value is set to 0 (zero), the system uses the interval from the parent monitor. Note that timeout and time_until_up combine to control when a resource is set to up. | ||
| up_interval integer | Specifies the interval for the system to use to perform the health check when a resource is up. When 0, specifies that the system uses the interval specified in interval to check the health of the resource.When any other number, enables specification of a different interval to use when checking the health of a resource that is up. | ||
| update_password string |
| always will update passwords if the target_password is specified.on_create will only set the password for newly created monitors. | |
| user string / required | The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable F5_USER. | ||
| validate_certs boolean added in 2.0 |
| If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.You may omit this option by setting the environment variable F5_VALIDATE_CERTS. | |
Notes
Note
- For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
- Requires BIG-IP software version >= 12.
- The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.
Examples
- name: Create a LDAP monitor
bigip_monitor_ldap:
name: foo
provider:
password: secret
server: lb.mydomain.com
user: admin
delegate_to: localhost
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| base string | changed | The new LDAP Base setting of the resource. Sample: base |
| chase_referrals boolean | changed | The new Chase Referrals setting of the resource. Sample: True |
| debug boolean | changed | The new Debug setting of the resource. Sample: True |
| description string | changed | The description of the monitor. Sample: Important_Monitor |
| filter string | changed | The new LDAP Filter setting of the resource. Sample: filter1 |
| interval integer | changed | The new interval in which to run the monitor check. Sample: 2 |
| ip string | changed | The new IP of IP/port definition. Sample: 10.12.13.14 |
| mandatory_attributes boolean | changed | The new Mandatory Attributes setting of the resource. |
| manual_resume boolean | changed | The new Manual Resume setting of the resource. |
| parent string | changed | New parent template of the monitor. Sample: ldap |
| security string | changed | The new Security setting of the resource. Sample: ssl |
| time_until_up integer | changed | The new time in which to mark a system as up after first successful response. Sample: 2 |
| timeout integer | changed | The new timeout in which the remote system must respond to the monitor. Sample: 10 |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by an Ansible Partner. [certified]
Authors
- Tim Rupp (@caphrim007)
Hint
If you notice any issues in this documentation you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/bigip_monitor_ldap_module.html