panos_match_rule – Test for match against a security rule on PAN-OS devices or Panorama management console

• DEPRECATED
• Synopsis
• Requirements
• Parameters
• Notes
• Examples
• Status

DEPRECATED

Synopsis

• Security policies allow you to enforce rules and take action, and can be as general or specific as needed.

Requirements

The below requirements are needed on the host that executes this module.

• pan-python can be obtained from PyPI https://pypi.org/project/pan-python/
• pandevice can be obtained from PyPI https://pypi.org/project/pandevice/

Parameters

Notes

Examples

- name: check security rules for Google DNS
  panos_match_rule:
    ip_address: '{{ ip_address }}'
    username: '{{ username }}'
    password: '{{ password }}'
    rule_type: 'security'
    source_ip: '10.0.0.0'
    destination_ip: '8.8.8.8'
    application: 'dns'
    destination_port: '53'
    protocol: '17'
  register: result
- debug: msg='{{result.stdout_lines}}'

- name: check security rules inbound SSH with user match
  panos_match_rule:
    ip_address: '{{ ip_address }}'
    username: '{{ username }}'
    password: '{{ password }}'
    rule_type: 'security'
    source_ip: '0.0.0.0'
    source_user: 'mydomain\jsmith'
    destination_ip: '192.168.100.115'
    destination_port: '22'
    protocol: '6'
  register: result
- debug: msg='{{result.stdout_lines}}'

- name: check NAT rules for source NAT
  panos_match_rule:
    ip_address: '{{ ip_address }}'
    username: '{{ username }}'
    password: '{{ password }}'
    rule_type: 'nat'
    source_zone: 'Prod-DMZ'
    source_ip: '10.10.118.50'
    to_interface: 'ethernet1/2'
    destination_zone: 'Internet'
    destination_ip: '0.0.0.0'
    protocol: '6'
  register: result
- debug: msg='{{result.stdout_lines}}'

- name: check NAT rules for inbound web
  panos_match_rule:
    ip_address: '{{ ip_address }}'
    username: '{{ username }}'
    password: '{{ password }}'
    rule_type: 'nat'
    source_zone: 'Internet'
    source_ip: '0.0.0.0'
    to_interface: 'ethernet1/1'
    destination_zone: 'Prod DMZ'
    destination_ip: '192.168.118.50'
    destination_port: '80'
    protocol: '6'
  register: result
- debug: msg='{{result.stdout_lines}}'

- name: check security rules for outbound POP3 in vsys4
  panos_match_rule:
    ip_address: '{{ ip_address }}'
    username: '{{ username }}'
    password: '{{ password }}'
    vsys_id: 'vsys4'
    rule_type: 'security'
    source_ip: '10.0.0.0'
    destination_ip: '4.3.2.1'
    application: 'pop3'
    destination_port: '110'
    protocol: '6'
  register: result
- debug: msg='{{result.stdout_lines}}'

Status

• This module will be removed in version 2.12. [deprecated]
• For more information see DEPRECATED.

Authors

• Robert Hagen (@rnh556)