gcp_cloudbuild_trigger_facts – Gather facts for GCP Trigger

New in version 2.8.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis

Gather facts for GCP Trigger

Requirements

The below requirements are needed on the host that executes this module.

python >= 2.6
requests >= 2.18.4
google-auth >= 1.3.0

Parameters

Parameter	Choices/Defaults	Comments
auth_kind string / required	Choices: application machineaccount serviceaccount	The type of credential used.
project string		The Google Cloud Platform project to use.
scopes list		Array of scopes to be used.
service_account_contents string		A string representing the contents of a Service Account JSON file. This should not be passed in as a dictionary, but a string that has the exact contents of a service account json file (valid JSON)
service_account_email string		An optional service account email address if machineaccount is selected and the user does not wish to use the default email.
service_account_file path		The path of a Service Account JSON file if serviceaccount is selected as type.

Notes

Note

For authentication, you can set service_account_file using the GCP_SERVICE_ACCOUNT_FILE env variable.
For authentication, you can set service_account_email using the GCP_SERVICE_ACCOUNT_EMAIL env variable.
For authentication, you can set service_account_contents using the GCP_SERVICE_ACCOUNT_CONTENTS env variable.
For authentication, you can set auth_kind using the GCP_AUTH_KIND env variable.
For authentication, you can set scopes using the GCP_SCOPES env variable.
Environment variables values will only be used if the playbook values are not set.
The service_account_email and service_account_file options are mutually exclusive.

Examples

- name: " a trigger facts"
  gcp_cloudbuild_trigger_facts:
    project: test_project
    auth_kind: serviceaccount
    service_account_file: "/tmp/auth.pem"
    state: facts

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key					Returned	Description
items complex					always	List of items
	build complex				success	Contents of the build template. Either a filename or build template must be provided.
		images list			success	A list of images to be pushed upon the successful completion of all build steps. The images are pushed using the builder service account's credentials. The digests of the pushed images will be stored in the Build resource's results field. If any of the images fail to be pushed, the build status is marked FAILURE.
		steps complex			success	The operations to be performed on the workspace.
			args list		success	A list of arguments that will be presented to the step when it is started. If the image used to run the step's container has an entrypoint, the args are used as arguments to that entrypoint. If the image does not define an entrypoint, the first element in args is used as the entrypoint, and the remainder will be used as arguments.
			dir string		success	Working directory to use when running this step's container. If this value is a relative path, it is relative to the build's working directory. If this value is absolute, it may be outside the build's working directory, in which case the contents of the path may not be persisted across build step executions, unless a `volume` for that path is specified. If the build specifies a `RepoSource` with `dir` and a step with a `dir`, which specifies an absolute path, the `RepoSource` `dir` is ignored for the step's execution.
			entrypoint string		success	Entrypoint to be used instead of the build step image's default entrypoint. If unset, the image's default entrypoint is used .
			env list		success	A list of environment variable definitions to be used when running a step. The elements are of the form "KEY=VALUE" for the environment variable "KEY" being given the value "VALUE".
			id string		success	Unique identifier for this build step, used in `wait_for` to reference this build step as a dependency.
			name string		success	The name of the container image that will run this particular build step. If the image is available in the host's Docker daemon's cache, it will be run directly. If not, the host will attempt to pull the image first, using the builder service account's credentials if necessary. The Docker daemon's cache will already have the latest versions of all of the officially supported build steps (https://github.com/GoogleCloudPlatform/cloud-builders.) The Docker daemon will also have cached many of the layers for some popular images, like "ubuntu", "debian", but they will be refreshed at the time you attempt to use them. If you built an image in a previous build step, it will be stored in the host's Docker daemon's cache and is available to use as the name for a later build step.
			secretEnv list		success	A list of environment variables which are encrypted using a Cloud Key Management Service crypto key. These values must be specified in the build's `Secret`.
			timeout string		success	Time limit for executing this build step. If not defined, the step has no time limit and will be allowed to continue to run until either it completes or the build itself times out.
			timing string		success	Output only. Stores timing information for executing this build step.
			volumes complex		success	List of volumes to mount into the build step. Each volume is created as an empty volume prior to execution of the build step. Upon completion of the build, volumes and their contents are discarded. Using a named volume in only one step is not valid as it is indicative of a build request with an incorrect configuration.
				name string	success	Name of the volume to mount. Volume names must be unique per build step and must be valid names for Docker volumes. Each named volume must be used by at least two build steps.
				path string	success	Path at which to mount the volume. Paths must be absolute and cannot conflict with other volume paths on the same build step or with certain reserved volume paths.
			waitFor list		success	The ID(s) of the step(s) that this build step depends on. This build step will not start until all the build steps in `wait_for` have completed successfully. If `wait_for` is empty, this build step will start when all previous build steps in the `Build.Steps` list have completed successfully.
		tags list			success	Tags for annotation of a Build. These are not docker tags.
	createTime string				success	Time when the trigger was created.
	description string				success	Human-readable description of the trigger.
	disabled boolean				success	Whether the trigger is disabled or not. If true, the trigger will never result in a build.
	filename string				success	Path, from the source root, to a file whose contents is used for the template. Either a filename or build template must be provided.
	id string				success	The unique identifier for the trigger.
	ignoredFiles list				success	ignoredFiles and includedFiles are file glob matches using http://godoc/pkg/path/filepath#Match extended with support for `**`. If ignoredFiles and changed files are both empty, then they are not used to determine whether or not to trigger a build. If ignoredFiles is not empty, then we ignore any files that match any of the ignored_file globs. If the change has no files that are outside of the ignoredFiles globs, then we do not trigger a build.
	includedFiles list				success	ignoredFiles and includedFiles are file glob matches using http://godoc/pkg/path/filepath#Match extended with support for `**`. If any of the files altered in the commit pass the ignoredFiles filter and includedFiles is empty, then as far as this filter is concerned, we should trigger the build. If any of the files altered in the commit pass the ignoredFiles filter and includedFiles is not empty, then we make sure that at least one of those files matches a includedFiles glob. If not, then we do not trigger a build.
	substitutions dictionary				success	Substitutions data for Build resource.
	triggerTemplate complex				success	Template describing the types of source changes to trigger a build. Branch and tag names in trigger templates are interpreted as regular expressions. Any branch or tag change that matches that regular expression will trigger a build.
		branchName string			success	Name of the branch to build. Exactly one a of branch name, tag, or commit SHA must be provided.
		commitSha string			success	Explicit commit SHA to build. Exactly one of a branch name, tag, or commit SHA must be provided.
		dir string			success	Directory, relative to the source root, in which to run the build. This must be a relative path. If a step's dir is specified and is an absolute path, this value is ignored for that step's execution.
		projectId string			success	ID of the project that owns the Cloud Source Repository. If omitted, the project ID requesting the build is assumed.
		repoName string			success	Name of the Cloud Source Repository. If omitted, the name "default" is assumed.
		tagName string			success	Name of the tag to build. Exactly one of a branch name, tag, or commit SHA must be provided.

Status

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors

Google Inc. (@googlecloudplatform)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/gcp_cloudbuild_trigger_facts_module.html