bigip_static_route – Manipulate static routes on a BIG-IP

New in version 2.5.

Synopsis

  • Manipulate static routes on a BIG-IP.

Parameters

Parameter Choices/Defaults Comments
description
string
Descriptive text that identifies the route.
destination
string
Specifies an IP address for the static entry in the routing table. When creating a new static route, this value is required.
This value cannot be changed once it is set.
gateway_address
string
Specifies the router for the system to use when forwarding packets to the destination host or network. Also known as the next-hop router address. This can be either an IPv4 or IPv6 address. When it is an IPv6 address that starts with FE80:, the address will be treated as a link-local address. This requires that the vlan parameter also be supplied.
mtu
string
Specifies a specific maximum transmission unit (MTU).
name
string / required
Name of the static route.
netmask
string
The netmask for the static route. When creating a new static route, this value is required.
This value can be in either IP or CIDR format.
This value cannot be changed once it is set.
partition
string
added in 2.6
 Default:
"Common"
Device partition to manage resources on.
password
string / required
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
pool
string
Specifies the pool through which the system forwards packets to the destination.
provider
dictionary
added in 2.5
A dict object containing connection details.
password
string / required
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
server
string / required
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
integer
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
ssh_keyfile
path
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports.
You may omit this option by setting the environment variable ANSIBLE_NET_SSH_KEYFILE.
timeout
integer
Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • cli
  • rest ←
Configures the transport connection to use when connecting to the remote device.
user
string / required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
reject
boolean
    Choices:
  • no
  • yes
Specifies that the system drops packets sent to the destination.
route_domain
integer
The route domain id of the system. When creating a new static route, if this value is not specified, a default value of 0 will be used.
This value cannot be changed once it is set.
server
string / required
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
integer
added in 2.2
 Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
state
string
    Choices:
  • present ←
  • absent
When present, ensures that the static route exists.
When absent, ensures that the static does not exist.
user
string / required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
added in 2.0
    Choices:
  • no
  • yes ←
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
vlan
string
Specifies the VLAN or Tunnel through which the system forwards packets to the destination. When gateway_address is a link-local IPv6 address, this value is required.

Notes

Note

  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
  • Requires BIG-IP software version >= 12.
  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create static route with gateway address
  bigip_static_route:
    destination: 10.10.10.10
    netmask: 255.255.255.255
    gateway_address: 10.2.2.3
    name: test-route
    provider:
      password: secret
      server: lb.mydomain.come
      user: admin
      validate_certs: no
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
description
string
 changed
Whether the banner is enabled or not.

Sample:
True
destination
string
 changed
Whether the banner is enabled or not.

Sample:
True
gateway_address
string
 changed
Whether the banner is enabled or not.

Sample:
True
netmask
string
 changed
Netmask of the destination.

Sample:
255.255.255.255
partition
string
 changed
The partition that the static route was created on.

Sample:
Common
pool
string
 changed
Whether the banner is enabled or not.

Sample:
True
reject
string
 changed
Whether the banner is enabled or not.

Sample:
True
route_domain
integer
 changed
Route domain of the static route.

Sample:
1
vlan
string
 changed
Whether the banner is enabled or not.

Sample:
True


Status

  • This module is guaranteed to have no backward incompatible interface changes going forward. [stableinterface]
  • This module is maintained by an Ansible Partner. [certified]

Authors

  • Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation you can edit this document to improve it.

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.8/modules/bigip_static_route_module.html