QQmlComponent Class

The QQmlComponent class encapsulates a QML component definition. More...

Header:	#include <QQmlComponent>
qmake:	QT += qml
Since:	Qt 5.0
Instantiated By:	Component
Inherits:	QObject

This class was introduced in Qt 5.0.

• List of all members, including inherited members

Public Types

enum	CompilationMode { PreferSynchronous, Asynchronous }
enum	Status { Null, Ready, Loading, Error }

Properties

• progress : const qreal
• status : const Status
• url : const QUrl

Public Functions

	QQmlComponent(QQmlEngine *engine, const QUrl &url, QQmlComponent::CompilationMode mode, QObject *parent = nullptr)
	QQmlComponent(QQmlEngine *engine, const QUrl &url, QObject *parent = nullptr)
	QQmlComponent(QQmlEngine *engine, const QString &fileName, QQmlComponent::CompilationMode mode, QObject *parent = nullptr)
	QQmlComponent(QQmlEngine *engine, const QString &fileName, QObject *parent = nullptr)
	QQmlComponent(QQmlEngine *engine, QObject *parent = nullptr)
virtual	~QQmlComponent() override
virtual QObject *	beginCreate(QQmlContext *publicContext)
virtual void	completeCreate()
virtual QObject *	create(QQmlContext *context = nullptr)
void	create(QQmlIncubator &incubator, QQmlContext *context = nullptr, QQmlContext *forContext = nullptr)
QObject *	createWithInitialProperties(const QVariantMap &initialProperties, QQmlContext *context = nullptr)
QQmlContext *	creationContext() const
QQmlEngine *	engine() const
QList<QQmlError>	errors() const
bool	isError() const
bool	isLoading() const
bool	isNull() const
bool	isReady() const
qreal	progress() const
void	setInitialProperties(QObject *component, const QVariantMap &properties)
QQmlComponent::Status	status() const
QUrl	url() const

Public Slots

void	loadUrl(const QUrl &url, QQmlComponent::CompilationMode mode)
void	loadUrl(const QUrl &url)
void	setData(const QByteArray &data, const QUrl &url)

Signals

void	progressChanged(qreal progress)
void	statusChanged(QQmlComponent::Status status)

Detailed Description

Components are reusable, encapsulated QML types with well-defined interfaces.

A QQmlComponent instance can be created from a QML file. For example, if there is a main.qml file like this:

import QtQuick 2.0

Item {
    width: 200
    height: 200
}

The following code loads this QML file as a component, creates an instance of this component using create(), and then queries the Item's width value:

QQmlEngine *engine = new QQmlEngine;
QQmlComponent component(engine, QUrl::fromLocalFile("main.qml"));

QObject *myObject = component.create();
QQuickItem *item = qobject_cast<QQuickItem*>(myObject);
int width = item->width();  // width = 200

To create instances of a component in code where a QQmlEngine instance is not available, you can use qmlContext() or qmlEngine(). For example, in the scenario below, child items are being created within a QQuickItem subclass:

void MyCppItem::init()
{
    QQmlEngine *engine = qmlEngine(this);
    // Or:
    // QQmlEngine *engine = qmlContext(this)->engine();
    QQmlComponent component(engine, QUrl::fromLocalFile("MyItem.qml"));
    QQuickItem *childItem = qobject_cast<QQuickItem*>(component.create());
    childItem->setParentItem(this);
}

Note that these functions will return null when called inside the constructor of a QObject subclass, as the instance will not yet have a context nor engine.

Network Components

If the URL passed to QQmlComponent is a network resource, or if the QML document references a network resource, the QQmlComponent has to fetch the network data before it is able to create objects. In this case, the QQmlComponent will have a Loading status. An application will have to wait until the component is Ready before calling QQmlComponent::create().

The following example shows how to load a QML file from a network resource. After creating the QQmlComponent, it tests whether the component is loading. If it is, it connects to the QQmlComponent::statusChanged() signal and otherwise calls the continueLoading() method directly. Note that QQmlComponent::isLoading() may be false for a network component if the component has been cached and is ready immediately.

MyApplication::MyApplication()
{
    // ...
    component = new QQmlComponent(engine, QUrl("http://www.example.com/main.qml"));
    if (component->isLoading())
        QObject::connect(component, SIGNAL(statusChanged(QQmlComponent::Status)),
                         this, SLOT(continueLoading()));
    else
        continueLoading();
}

void MyApplication::continueLoading()
{
    if (component->isError()) {
        qWarning() << component->errors();
    } else {
        QObject *myObject = component->create();
    }
}

Member Type Documentation

enum QQmlComponent::CompilationMode

Specifies whether the QQmlComponent should load the component immediately, or asynchonously.

Constant	Value	Description
QQmlComponent::PreferSynchronous	0	Prefer loading/compiling the component immediately, blocking the thread. This is not always possible; for example, remote URLs will always load asynchronously.
QQmlComponent::Asynchronous	1	Load/compile the component in a background thread.

enum QQmlComponent::Status

Specifies the loading status of the QQmlComponent.

Constant	Value	Description
QQmlComponent::Null	0	This QQmlComponent has no data. Call loadUrl() or setData() to add QML content.
QQmlComponent::Ready	1	This QQmlComponent is ready and create() may be called.
QQmlComponent::Loading	2	This QQmlComponent is loading network data.
QQmlComponent::Error	3	An error has occurred. Call errors() to retrieve a list of errors.

Member Function Documentation

QQmlComponent::QQmlComponent(QQmlEngine *engine, const QUrl &url, QQmlComponent::CompilationMode mode, QObject *parent = nullptr)

Create a QQmlComponent from the given url and give it the specified parent and engine. If mode is Asynchronous, the component will be loaded and compiled asynchronously.

Ensure that the URL provided is full and correct, in particular, use QUrl::fromLocalFile() when loading a file from the local filesystem.

Relative paths will be resolved against QQmlEngine::baseUrl(), which is the current working directory unless specified.

See also loadUrl().

QQmlComponent::QQmlComponent(QQmlEngine *engine, const QUrl &url, QObject *parent = nullptr)

Create a QQmlComponent from the given url and give it the specified parent and engine.

Ensure that the URL provided is full and correct, in particular, use QUrl::fromLocalFile() when loading a file from the local filesystem.

Relative paths will be resolved against QQmlEngine::baseUrl(), which is the current working directory unless specified.

See also loadUrl().

QQmlComponent::QQmlComponent(QQmlEngine *engine, const QString &fileName, QQmlComponent::CompilationMode mode, QObject *parent = nullptr)

Create a QQmlComponent from the given fileName and give it the specified parent and engine. If mode is Asynchronous, the component will be loaded and compiled asynchronously.

See also loadUrl().

QQmlComponent::QQmlComponent(QQmlEngine *engine, const QString &fileName, QObject *parent = nullptr)

Create a QQmlComponent from the given fileName and give it the specified parent and engine.

See also loadUrl().

QQmlComponent::QQmlComponent(QQmlEngine *engine, QObject *parent = nullptr)

Create a QQmlComponent with no data and give it the specified engine and parent. Set the data with setData().

[slot] void QQmlComponent::loadUrl(const QUrl &url, QQmlComponent::CompilationMode mode)

Load the QQmlComponent from the provided url. If mode is Asynchronous, the component will be loaded and compiled asynchronously.

Ensure that the URL provided is full and correct, in particular, use QUrl::fromLocalFile() when loading a file from the local filesystem.

Relative paths will be resolved against QQmlEngine::baseUrl(), which is the current working directory unless specified.

[slot] void QQmlComponent::loadUrl(const QUrl &url)

Load the QQmlComponent from the provided url.

Ensure that the URL provided is full and correct, in particular, use QUrl::fromLocalFile() when loading a file from the local filesystem.

Relative paths will be resolved against QQmlEngine::baseUrl(), which is the current working directory unless specified.

[signal] void QQmlComponent::progressChanged(qreal progress)

Emitted whenever the component's loading progress changes. progress will be the current progress between 0.0 (nothing loaded) and 1.0 (finished).

Note: Notifier signal for property progress.

[slot] void QQmlComponent::setData(const QByteArray &data, const QUrl &url)

Sets the QQmlComponent to use the given QML data. If url is provided, it is used to set the component name and to provide a base path for items resolved by this component.

[signal] void QQmlComponent::statusChanged(QQmlComponent::Status status)

Emitted whenever the component's status changes. status will be the new status.

Note: Notifier signal for property status.

[override virtual] QQmlComponent::~QQmlComponent()

Destruct the QQmlComponent.

[virtual] QObject *QQmlComponent::beginCreate(QQmlContext *publicContext)

This method provides advanced control over component instance creation. In general, programmers should use QQmlComponent::create() to create object instances.

Create an object instance from this component. Returns nullptr if creation failed. publicContext specifies the context within which to create the object instance.

When QQmlComponent constructs an instance, it occurs in three steps:

1. The object hierarchy is created, and constant values are assigned.
2. Property bindings are evaluated for the first time.
3. If applicable, QQmlParserStatus::componentComplete() is called on objects.

QQmlComponent::beginCreate() differs from QQmlComponent::create() in that it only performs step 1. QQmlComponent::completeCreate() must be called to complete steps 2 and 3.

This breaking point is sometimes useful when using attached properties to communicate information to an instantiated component, as it allows their initial values to be configured before property bindings take effect.

The ownership of the returned object instance is transferred to the caller.

See also completeCreate() and QQmlEngine::ObjectOwnership.

[virtual] void QQmlComponent::completeCreate()

This method provides advanced control over component instance creation. In general, programmers should use QQmlComponent::create() to create a component.

This function completes the component creation begun with QQmlComponent::beginCreate() and must be called afterwards.

See also beginCreate().

[virtual] QObject *QQmlComponent::create(QQmlContext *context = nullptr)

Create an object instance from this component. Returns nullptr if creation failed. context specifies the context within which to create the object instance.

If context is nullptr (the default), it will create the instance in the root context of the engine.

The ownership of the returned object instance is transferred to the caller.

If the object being created from this component is a visual item, it must have a visual parent, which can be set by calling QQuickItem::setParentItem(). See Concepts - Visual Parent in Qt Quick for more details.

See also QQmlEngine::ObjectOwnership.

void QQmlComponent::create(QQmlIncubator &incubator, QQmlContext *context = nullptr, QQmlContext *forContext = nullptr)

Create an object instance from this component using the provided incubator. context specifies the context within which to create the object instance.

If context is 0 (the default), it will create the instance in the engine's root context.

forContext specifies a context that this object creation depends upon. If the forContext is being created asynchronously, and the QQmlIncubator::IncubationMode is QQmlIncubator::AsynchronousIfNested, this object will also be created asynchronously. If forContext is 0 (the default), the context will be used for this decision.

The created object and its creation status are available via the incubator.

See also QQmlIncubator.

QObject *QQmlComponent::createWithInitialProperties(const QVariantMap &initialProperties, QQmlContext *context = nullptr)

Create an object instance of this component, and initialize its toplevel properties with initialProperties. context specifies the context where the object instance is to be created.

This function was introduced in Qt 5.14.

See also QQmlComponent::create.

QQmlContext *QQmlComponent::creationContext() const

Returns the QQmlContext the component was created in. This is only valid for components created directly from QML.

QQmlEngine *QQmlComponent::engine() const

Returns the QQmlEngine of this component.

This function was introduced in Qt 5.12.

QList<QQmlError> QQmlComponent::errors() const

Returns the list of errors that occurred during the last compile or create operation. An empty list is returned if isError() is not set.

bool QQmlComponent::isError() const

Returns true if status() == QQmlComponent::Error.

bool QQmlComponent::isLoading() const

Returns true if status() == QQmlComponent::Loading.

bool QQmlComponent::isNull() const

Returns true if status() == QQmlComponent::Null.

bool QQmlComponent::isReady() const

Returns true if status() == QQmlComponent::Ready.

void QQmlComponent::setInitialProperties(QObject *component, const QVariantMap &properties)

Set toplevel properties of the component.

This method provides advanced control over component instance creation. In general, programmers should use QQmlComponent::createWithInitialProperties to create a component.

Use this method after beginCreate and before completeCreate has been called. If a provided property does not exist, a warning is issued.

This function was introduced in Qt 5.14.