Struct std::net::UdpSocket

Creates a UDP socket from the given address.

The address type can be any implementor of ToSocketAddrs trait. See its documentation for concrete examples.

If addr yields multiple addresses, bind will be attempted with each of the addresses until one succeeds and returns the socket. If none of the addresses succeed in creating a socket, the error returned from the last attempt (the last address) is returned.

Examples

Creates a UDP socket bound to 127.0.0.1:3400:

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:3400").expect("couldn't bind to address");

Creates a UDP socket bound to 127.0.0.1:3400. If the socket cannot be bound to that address, create a UDP socket bound to 127.0.0.1:3401:

use std::net::{SocketAddr, UdpSocket};

let addrs = [
    SocketAddr::from(([127, 0, 0, 1], 3400)),
    SocketAddr::from(([127, 0, 0, 1], 3401)),
];
let socket = UdpSocket::bind(&addrs[..]).expect("couldn't bind to address");

Receives a single datagram message on the socket. On success, returns the number of bytes read and the origin.

The function must be called with valid byte array buf of sufficient size to hold the message bytes. If a message is too long to fit in the supplied buffer, excess bytes may be discarded.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
let mut buf = [0; 10];
let (number_of_bytes, src_addr) = socket.recv_from(&mut buf)
                                        .expect("Didn't receive data");
let filled_buf = &mut buf[..number_of_bytes];

Receives a single datagram message on the socket, without removing it from the queue. On success, returns the number of bytes read and the origin.

The function must be called with valid byte array buf of sufficient size to hold the message bytes. If a message is too long to fit in the supplied buffer, excess bytes may be discarded.

Successive calls return the same data. This is accomplished by passing MSG_PEEK as a flag to the underlying recvfrom system call.

Do not use this function to implement busy waiting, instead use libc::poll to synchronize IO events on one or more sockets.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
let mut buf = [0; 10];
let (number_of_bytes, src_addr) = socket.peek_from(&mut buf)
                                        .expect("Didn't receive data");
let filled_buf = &mut buf[..number_of_bytes];

Sends data on the socket to the given address. On success, returns the number of bytes written.

Address type can be any implementor of ToSocketAddrs trait. See its documentation for concrete examples.

It is possible for addr to yield multiple addresses, but send_to will only send data to the first address yielded by addr.

This will return an error when the IP version of the local socket does not match that returned from ToSocketAddrs.

See Issue #34202 for more details.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.send_to(&[0; 10], "127.0.0.1:4242").expect("couldn't send data");

Returns the socket address of the remote peer this socket was connected to.

Examples

use std::net::{Ipv4Addr, SocketAddr, SocketAddrV4, UdpSocket};

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.connect("192.168.0.1:41203").expect("couldn't connect to address");
assert_eq!(socket.peer_addr().unwrap(),
           SocketAddr::V4(SocketAddrV4::new(Ipv4Addr::new(192, 168, 0, 1), 41203)));

If the socket isn’t connected, it will return a NotConnected error.

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
assert_eq!(socket.peer_addr().unwrap_err().kind(),
           std::io::ErrorKind::NotConnected);

Returns the socket address that this socket was created from.

Examples

use std::net::{Ipv4Addr, SocketAddr, SocketAddrV4, UdpSocket};

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
assert_eq!(socket.local_addr().unwrap(),
           SocketAddr::V4(SocketAddrV4::new(Ipv4Addr::new(127, 0, 0, 1), 34254)));

Creates a new independently owned handle to the underlying socket.

The returned UdpSocket is a reference to the same socket that this object references. Both handles will read and write the same port, and options set on one socket will be propagated to the other.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
let socket_clone = socket.try_clone().expect("couldn't clone the socket");

Sets the read timeout to the timeout specified.

If the value specified is None, then read calls will block indefinitely. An Err is returned if the zero Duration is passed to this method.

Platform-specific behavior

Platforms may return a different error code whenever a read times out as a result of setting this option. For example Unix typically returns an error of the kind WouldBlock, but Windows may return TimedOut.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_read_timeout(None).expect("set_read_timeout call failed");

An Err is returned if the zero Duration is passed to this method:

use std::io;
use std::net::UdpSocket;
use std::time::Duration;

let socket = UdpSocket::bind("127.0.0.1:34254").unwrap();
let result = socket.set_read_timeout(Some(Duration::new(0, 0)));
let err = result.unwrap_err();
assert_eq!(err.kind(), io::ErrorKind::InvalidInput)

Sets the write timeout to the timeout specified.

If the value specified is None, then write calls will block indefinitely. An Err is returned if the zero Duration is passed to this method.

Platform-specific behavior

Platforms may return a different error code whenever a write times out as a result of setting this option. For example Unix typically returns an error of the kind WouldBlock, but Windows may return TimedOut.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_write_timeout(None).expect("set_write_timeout call failed");

An Err is returned if the zero Duration is passed to this method:

use std::io;
use std::net::UdpSocket;
use std::time::Duration;

let socket = UdpSocket::bind("127.0.0.1:34254").unwrap();
let result = socket.set_write_timeout(Some(Duration::new(0, 0)));
let err = result.unwrap_err();
assert_eq!(err.kind(), io::ErrorKind::InvalidInput)

Returns the read timeout of this socket.

If the timeout is None, then read calls will block indefinitely.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_read_timeout(None).expect("set_read_timeout call failed");
assert_eq!(socket.read_timeout().unwrap(), None);

Returns the write timeout of this socket.

If the timeout is None, then write calls will block indefinitely.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_write_timeout(None).expect("set_write_timeout call failed");
assert_eq!(socket.write_timeout().unwrap(), None);

Sets the value of the SO_BROADCAST option for this socket.

When enabled, this socket is allowed to send packets to a broadcast address.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_broadcast(false).expect("set_broadcast call failed");

Gets the value of the SO_BROADCAST option for this socket.

For more information about this option, see UdpSocket::set_broadcast.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_broadcast(false).expect("set_broadcast call failed");
assert_eq!(socket.broadcast().unwrap(), false);

Sets the value of the IP_MULTICAST_LOOP option for this socket.

If enabled, multicast packets will be looped back to the local socket. Note that this might not have any effect on IPv6 sockets.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_multicast_loop_v4(false).expect("set_multicast_loop_v4 call failed");

Gets the value of the IP_MULTICAST_LOOP option for this socket.

For more information about this option, see UdpSocket::set_multicast_loop_v4.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_multicast_loop_v4(false).expect("set_multicast_loop_v4 call failed");
assert_eq!(socket.multicast_loop_v4().unwrap(), false);

Sets the value of the IP_MULTICAST_TTL option for this socket.

Indicates the time-to-live value of outgoing multicast packets for this socket. The default value is 1 which means that multicast packets don’t leave the local network unless explicitly requested.

Note that this might not have any effect on IPv6 sockets.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_multicast_ttl_v4(42).expect("set_multicast_ttl_v4 call failed");

Gets the value of the IP_MULTICAST_TTL option for this socket.

For more information about this option, see UdpSocket::set_multicast_ttl_v4.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_multicast_ttl_v4(42).expect("set_multicast_ttl_v4 call failed");
assert_eq!(socket.multicast_ttl_v4().unwrap(), 42);

Sets the value of the IPV6_MULTICAST_LOOP option for this socket.

Controls whether this socket sees the multicast packets it sends itself. Note that this might not have any affect on IPv4 sockets.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_multicast_loop_v6(false).expect("set_multicast_loop_v6 call failed");

Gets the value of the IPV6_MULTICAST_LOOP option for this socket.

For more information about this option, see UdpSocket::set_multicast_loop_v6.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_multicast_loop_v6(false).expect("set_multicast_loop_v6 call failed");
assert_eq!(socket.multicast_loop_v6().unwrap(), false);

Sets the value for the IP_TTL option on this socket.

This value sets the time-to-live field that is used in every packet sent from this socket.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_ttl(42).expect("set_ttl call failed");

Gets the value of the IP_TTL option for this socket.

For more information about this option, see UdpSocket::set_ttl.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.set_ttl(42).expect("set_ttl call failed");
assert_eq!(socket.ttl().unwrap(), 42);

Executes an operation of the IP_ADD_MEMBERSHIP type.

This function specifies a new multicast group for this socket to join. The address must be a valid multicast address, and interface is the address of the local interface with which the system should join the multicast group. If it’s equal to INADDR_ANY then an appropriate interface is chosen by the system.

Executes an operation of the IPV6_ADD_MEMBERSHIP type.

This function specifies a new multicast group for this socket to join. The address must be a valid multicast address, and interface is the index of the interface to join/leave (or 0 to indicate any interface).

Executes an operation of the IP_DROP_MEMBERSHIP type.

For more information about this option, see UdpSocket::join_multicast_v4.

Executes an operation of the IPV6_DROP_MEMBERSHIP type.

For more information about this option, see UdpSocket::join_multicast_v6.

Gets the value of the SO_ERROR option on this socket.

This will retrieve the stored error in the underlying socket, clearing the field in the process. This can be useful for checking errors between calls.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
match socket.take_error() {
    Ok(Some(error)) => println!("UdpSocket error: {:?}", error),
    Ok(None) => println!("No error"),
    Err(error) => println!("UdpSocket.take_error failed: {:?}", error),
}

Connects this UDP socket to a remote address, allowing the send and recv syscalls to be used to send data and also applies filters to only receive data from the specified address.

If addr yields multiple addresses, connect will be attempted with each of the addresses until the underlying OS function returns no error. Note that usually, a successful connect call does not specify that there is a remote server listening on the port, rather, such an error would only be detected after the first send. If the OS returns an error for each of the specified addresses, the error returned from the last connection attempt (the last address) is returned.

Examples

Creates a UDP socket bound to 127.0.0.1:3400 and connect the socket to 127.0.0.1:8080:

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:3400").expect("couldn't bind to address");
socket.connect("127.0.0.1:8080").expect("connect function failed");

Unlike in the TCP case, passing an array of addresses to the connect function of a UDP socket is not a useful thing to do: The OS will be unable to determine whether something is listening on the remote address without the application sending data.

Sends data on the socket to the remote address to which it is connected.

UdpSocket::connect will connect this socket to a remote address. This method will fail if the socket is not connected.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.connect("127.0.0.1:8080").expect("connect function failed");
socket.send(&[0, 1, 2]).expect("couldn't send message");

Receives a single datagram message on the socket from the remote address to which it is connected. On success, returns the number of bytes read.

The function must be called with valid byte array buf of sufficient size to hold the message bytes. If a message is too long to fit in the supplied buffer, excess bytes may be discarded.

UdpSocket::connect will connect this socket to a remote address. This method will fail if the socket is not connected.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.connect("127.0.0.1:8080").expect("connect function failed");
let mut buf = [0; 10];
match socket.recv(&mut buf) {
    Ok(received) => println!("received {} bytes {:?}", received, &buf[..received]),
    Err(e) => println!("recv function failed: {:?}", e),
}

Receives single datagram on the socket from the remote address to which it is connected, without removing the message from input queue. On success, returns the number of bytes peeked.

The function must be called with valid byte array buf of sufficient size to hold the message bytes. If a message is too long to fit in the supplied buffer, excess bytes may be discarded.

Successive calls return the same data. This is accomplished by passing MSG_PEEK as a flag to the underlying recv system call.

Do not use this function to implement busy waiting, instead use libc::poll to synchronize IO events on one or more sockets.

UdpSocket::connect will connect this socket to a remote address. This method will fail if the socket is not connected.

Errors

This method will fail if the socket is not connected. The connect method will connect this socket to a remote address.

Examples

use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:34254").expect("couldn't bind to address");
socket.connect("127.0.0.1:8080").expect("connect function failed");
let mut buf = [0; 10];
match socket.peek(&mut buf) {
    Ok(received) => println!("received {} bytes", received),
    Err(e) => println!("peek function failed: {:?}", e),
}

Moves this UDP socket into or out of nonblocking mode.

This will result in recv, recv_from, send, and send_to operations becoming nonblocking, i.e., immediately returning from their calls. If the IO operation is successful, Ok is returned and no further action is required. If the IO operation could not be completed and needs to be retried, an error with kind io::ErrorKind::WouldBlock is returned.

On Unix platforms, calling this method corresponds to calling fcntl FIONBIO. On Windows calling this method corresponds to calling ioctlsocket FIONBIO.

Examples

Creates a UDP socket bound to 127.0.0.1:7878 and read bytes in nonblocking mode:

use std::io;
use std::net::UdpSocket;

let socket = UdpSocket::bind("127.0.0.1:7878").unwrap();
socket.set_nonblocking(true).unwrap();

let mut buf = [0; 10];
let (num_bytes_read, _) = loop {
    match socket.recv_from(&mut buf) {
        Ok(n) => break n,
        Err(ref e) if e.kind() == io::ErrorKind::WouldBlock => {
            // wait until network socket is ready, typically implemented
            // via platform-specific APIs such as epoll or IOCP
            wait_for_fd();
        }
        Err(e) => panic!("encountered IO error: {}", e),
    }
};
println!("bytes: {:?}", &buf[..num_bytes_read]);