fortinet.fortios.fortios_user_radius – Configure RADIUS server entries in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 2.1.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_user_radius.

New in version 2.10: of fortinet.fortios

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis

This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify user feature and radius category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

ansible>=2.9.0

Parameters

Parameter			Choices/Defaults	Comments
access_token string				Token-based authentication. Generated from GUI of Fortigate.
enable_log boolean			Choices: no ← yes	Enable/Disable logging for task.
state string / required			Choices: present absent	Indicates whether to create or remove the object.
user_radius dictionary				Configure RADIUS server entries.
	accounting_server list / elements=string			Additional accounting servers.
		id integer / required		ID (0 - 4294967295).
		interface string		Specify outgoing interface to reach server. Source system.interface.name.
		interface_select_method string	Choices: auto sdwan specify	Specify how to select outgoing interface to reach server.
		port integer		RADIUS accounting port number.
		secret string		Secret key.
		server string		{<name_str\|ip_str>} Server CN domain name or IP.
		source_ip string		Source IP address for communications to the RADIUS server.
		status string	Choices: enable disable	Status.
	acct_all_servers string		Choices: enable disable	Enable/disable sending of accounting messages to all configured servers .
	acct_interim_interval integer			Time in seconds between each accounting interim update message.
	all_usergroup string		Choices: disable enable	Enable/disable automatically including this RADIUS server in all user groups.
	auth_type string		Choices: auto ms_chap_v2 ms_chap chap pap	Authentication methods/protocols permitted for this RADIUS server.
	class list / elements=string			Class attribute name(s).
		name string / required		Class name.
	group_override_attr_type string		Choices: filter-Id class	RADIUS attribute type to override user group information.
	h3c_compatibility string		Choices: enable disable	Enable/disable compatibility with the H3C, a mechanism that performs security checking for authentication.
	interface string			Specify outgoing interface to reach server. Source system.interface.name.
	interface_select_method string		Choices: auto sdwan specify	Specify how to select outgoing interface to reach server.
	name string / required			RADIUS server entry name.
	nas_ip string			IP address used to communicate with the RADIUS server and used as NAS-IP-Address and Called-Station-ID attributes.
	password_encoding string		Choices: auto ISO-8859-1	Password encoding.
	password_renewal string		Choices: enable disable	Enable/disable password renewal.
	radius_coa string		Choices: enable disable	Enable to allow a mechanism to change the attributes of an authentication, authorization, and accounting session after it is authenticated.
	radius_port integer			RADIUS service port number.
	rsso string		Choices: enable disable	Enable/disable RADIUS based single sign on feature.
	rsso_context_timeout integer			Time in seconds before the logged out user is removed from the "user context list" of logged on users.
	rsso_endpoint_attribute string		Choices: User-Name NAS-IP-Address Framed-IP-Address Framed-IP-Netmask Filter-Id Login-IP-Host Reply-Message Callback-Number Callback-Id Framed-Route Framed-IPX-Network Class Called-Station-Id Calling-Station-Id NAS-Identifier Proxy-State Login-LAT-Service Login-LAT-Node Login-LAT-Group Framed-AppleTalk-Zone Acct-Session-Id Acct-Multi-Session-Id	RADIUS attributes used to extract the user end point identifer from the RADIUS Start record.
	rsso_endpoint_block_attribute string		Choices: User-Name NAS-IP-Address Framed-IP-Address Framed-IP-Netmask Filter-Id Login-IP-Host Reply-Message Callback-Number Callback-Id Framed-Route Framed-IPX-Network Class Called-Station-Id Calling-Station-Id NAS-Identifier Proxy-State Login-LAT-Service Login-LAT-Node Login-LAT-Group Framed-AppleTalk-Zone Acct-Session-Id Acct-Multi-Session-Id	RADIUS attributes used to block a user.
	rsso_ep_one_ip_only string		Choices: enable disable	Enable/disable the replacement of old IP addresses with new ones for the same endpoint on RADIUS accounting Start messages.
	rsso_flush_ip_session string		Choices: enable disable	Enable/disable flushing user IP sessions on RADIUS accounting Stop messages.
	rsso_log_flags list / elements=string		Choices: protocol-error profile-missing accounting-stop-missed accounting-event endpoint-block radiusd-other none	Events to log.
	rsso_log_period integer			Time interval in seconds that group event log messages will be generated for dynamic profile events.
	rsso_radius_response string		Choices: enable disable	Enable/disable sending RADIUS response packets after receiving Start and Stop records.
	rsso_radius_server_port integer			UDP port to listen on for RADIUS Start and Stop records.
	rsso_secret string			RADIUS secret used by the RADIUS accounting server.
	rsso_validate_request_secret string		Choices: enable disable	Enable/disable validating the RADIUS request shared secret in the Start or End record.
	secondary_secret string			Secret key to access the secondary server.
	secondary_server string			{<name_str\|ip_str>} secondary RADIUS CN domain name or IP.
	secret string			Pre-shared secret key used to access the primary RADIUS server.
	server string			Primary RADIUS server CN domain name or IP address.
	source_ip string			Source IP address for communications to the RADIUS server.
	sso_attribute string		Choices: User-Name NAS-IP-Address Framed-IP-Address Framed-IP-Netmask Filter-Id Login-IP-Host Reply-Message Callback-Number Callback-Id Framed-Route Framed-IPX-Network Class Called-Station-Id Calling-Station-Id NAS-Identifier Proxy-State Login-LAT-Service Login-LAT-Node Login-LAT-Group Framed-AppleTalk-Zone Acct-Session-Id Acct-Multi-Session-Id	RADIUS attribute that contains the profile group name to be extracted from the RADIUS Start record.
	sso_attribute_key string			Key prefix for SSO group value in the SSO attribute.
	sso_attribute_value_override string		Choices: enable disable	Enable/disable override old attribute value with new value for the same endpoint.
	switch_controller_acct_fast_framedip_detect integer			Switch controller accounting message Framed-IP detection from DHCP snooping (seconds).
	switch_controller_service_type list / elements=string		Choices: login framed callback-login callback-framed outbound administrative nas-prompt authenticate-only callback-nas-prompt call-check callback-administrative	RADIUS service type.
	tertiary_secret string			Secret key to access the tertiary server.
	tertiary_server string			{<name_str\|ip_str>} tertiary RADIUS CN domain name or IP.
	timeout integer			Time in seconds between re-sending authentication requests.
	use_management_vdom string		Choices: enable disable	Enable/disable using management VDOM to send requests.
	username_case_sensitive string		Choices: enable disable	Enable/disable case sensitive user names.
vdom string			Default: "root"	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure RADIUS server entries.
    fortios_user_radius:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      user_radius:
        accounting_server:
         -
            id:  "4"
            interface: "<your_own_value> (source system.interface.name)"
            interface_select_method: "auto"
            port: "7"
            secret: "<your_own_value>"
            server: "192.168.100.40"
            source_ip: "84.230.14.43"
            status: "enable"
        acct_all_servers: "enable"
        acct_interim_interval: "13"
        all_usergroup: "disable"
        auth_type: "auto"
        class:
         -
            name: "default_name_17"
        group_override_attr_type: "filter-Id"
        h3c_compatibility: "enable"
        interface: "<your_own_value> (source system.interface.name)"
        interface_select_method: "auto"
        name: "default_name_22"
        nas_ip: "<your_own_value>"
        password_encoding: "auto"
        password_renewal: "enable"
        radius_coa: "enable"
        radius_port: "27"
        rsso: "enable"
        rsso_context_timeout: "29"
        rsso_endpoint_attribute: "User-Name"
        rsso_endpoint_block_attribute: "User-Name"
        rsso_ep_one_ip_only: "enable"
        rsso_flush_ip_session: "enable"
        rsso_log_flags: "protocol-error"
        rsso_log_period: "35"
        rsso_radius_response: "enable"
        rsso_radius_server_port: "37"
        rsso_secret: "<your_own_value>"
        rsso_validate_request_secret: "enable"
        secondary_secret: "<your_own_value>"
        secondary_server: "<your_own_value>"
        secret: "<your_own_value>"
        server: "192.168.100.40"
        source_ip: "84.230.14.43"
        sso_attribute: "User-Name"
        sso_attribute_key: "<your_own_value>"
        sso_attribute_value_override: "enable"
        switch_controller_acct_fast_framedip_detect: "48"
        switch_controller_service_type: "login"
        tertiary_secret: "<your_own_value>"
        tertiary_server: "<your_own_value>"
        timeout: "52"
        use_management_vdom: "enable"
        username_case_sensitive: "enable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
build string	always	Build number of the fortigate image Sample: 1547
http_method string	always	Last method used to provision the content into FortiGate Sample: PUT
http_status string	always	Last result given by FortiGate on last operation applied Sample: 200
mkey string	success	Master key (id) used in the last call to FortiGate Sample: id
name string	always	Name of the table used to fulfill the request Sample: urlfilter
path string	always	Path of the table used to fulfill the request Sample: webfilter
revision string	always	Internal revision number Sample: 17.0.2.10658
serial string	always	Serial number of the unit Sample: FGVMEVYYQT3AB5352
status string	always	Indication of the operation's result Sample: success
vdom string	always	Virtual domain used Sample: root
version string	always	Version of the FortiGate Sample: v5.6.3

Authors

Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Hongbin Lu (@fgtdev-hblu)
Frank Shen (@frankshen01)
Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/fortinet/fortios/fortios_user_radius_module.html