f5networks.f5_modules.bigip_monitor_http – Manages F5 BIG-IP LTM HTTP monitors

Note

This plugin is part of the f5networks.f5_modules collection (version 1.12.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_monitor_http.

New in version 1.0.0: of f5networks.f5_modules

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

Manages F5 BIG-IP LTM HTTP monitors.

Parameters

Parameter		Choices/Defaults	Comments
description string			The description of the monitor.
interval integer			The interval specifying how frequently the monitor instance of this template will run. If this parameter is not provided when creating a new monitor, the default value is 5. This value must be less than the `timeout` value.
ip string			IP address part of the IP/port definition. If this parameter is not provided when creating a new monitor, the default value is '*'.
name string / required			Monitor name.
parent string		Default: "/Common/http"	The parent template of this monitor template. Once this value has been set, it cannot be changed. By default, this value is the `http` parent on the `Common` partition.
partition string		Default: "Common"	Device partition to manage resources on.
port string			Port address part of the IP/port definition. If this parameter is not provided when creating a new monitor, the default value is '*'. If specifying an IP address, you must specify a value between 1 and 65535.
provider dictionary added in 1.0.0 of f5networks.f5_modules			A dict object containing connection details.
	auth_provider string		Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
	no_f5_teem boolean	Choices: no ← yes	If `yes`, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable `F5_TELEMETRY_OFF`. Previously used variable `F5_TEEM` is deprecated as its name was confusing.
	password string / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server string / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port integer	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: rest ←	Configures the transport connection to use when connecting to the remote device.
	user string / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
receive string			The Receive string for the monitor call.
receive_disable string			This setting works like `receive`, except the system marks the node or pool member disabled when its response matches the `receive_disable` string but not `receive`. To use this setting, you must specify both `receive_disable` and `receive`.
reverse boolean		Choices: no yes	Specifies whether the monitor operates in reverse mode. When the monitor is in reverse mode, a successful receive string match marks the monitored object down instead of up. You can use the this mode only if you configure the `receive` option. This parameter is not compatible with the `time_until_up` parameter. If `time_until_up` is specified, it must be `0`. Or, if it already exists, it must be `0`.
send string			The Send string for the monitor call. When creating a new monitor, if this value is not provided, the default `GET /\r\n` is used.
state string		Choices: present ← absent	When `present`, ensures the monitor exists. When `absent`, ensures the monitor is removed.
target_password string			Specifies the password, if the monitored target requires authentication.
target_username string			Specifies the user name, if the monitored target requires authentication.
time_until_up integer			Specifies the amount of time in seconds after the first successful response before a node is marked up. A value of 0 causes a node to be marked up immediately after a valid response is received from the node. If this parameter is not provided when creating a new monitor, the default value will be 0.
timeout integer			The number of seconds in which the node or service must respond to the monitor request. If the target responds within the set time period, it is considered up. If the target does not respond within the set time period, it is considered down. You can change this to any number, however, it should be 3 times the interval number of seconds plus 1 second. If this parameter is not provided when creating a new monitor, the default value is 16.

Notes

Note

Requires BIG-IP software version >= 12
For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create HTTP Monitor
  bigip_monitor_http:
    state: present
    ip: 10.10.10.10
    name: my_http_monitor
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Remove HTTP Monitor
  bigip_monitor_http:
    state: absent
    name: my_http_monitor
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

- name: Include a username and password in the HTTP monitor
  bigip_monitor_http:
    state: absent
    name: my_http_monitor
    target_username: monitor_user
    target_password: monitor_pass
    provider:
      server: lb.mydomain.com
      user: admin
      password: secret
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
description string	changed	The description of the monitor. Sample: Important_Monitor
interval integer	changed	The new interval at which to run the monitor check. Sample: 2
ip string	changed	The new IP of IP/port definition. Sample: 10.12.13.14
parent string	changed	New parent template of the monitor. Sample: http
reverse boolean	changed	Whether the monitor operates in reverse mode. Sample: True
time_until_up integer	changed	The new time in which to mark a system as up after first successful response. Sample: 2
timeout integer	changed	The new timeout in which the remote system must respond to the monitor. Sample: 10

Authors

Tim Rupp (@caphrim007)
Wojciech Wypior (@wojtek0806)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/f5networks/f5_modules/bigip_monitor_http_module.html