community.network.cnos_l3_interface – Manage Layer-3 interfaces on Lenovo CNOS network devices.

Note

This plugin is part of the community.network collection (version 3.0.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.cnos_l3_interface.

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis

This module provides declarative management of Layer-3 interfaces on CNOS network devices.

Parameters

Parameter		Choices/Defaults	Comments
aggregate string			List of Layer-3 interfaces definitions. Each of the entry in aggregate list should define name of interface `name` and a optional `ipv4` or `ipv6` address.
ipv4 string			IPv4 address to be set for the Layer-3 interface mentioned in name option. The address format is <ipv4 address>/<mask>, the mask is number in range 0-32 eg. 10.241.107.1/24
ipv6 string			IPv6 address to be set for the Layer-3 interface mentioned in name option. The address format is <ipv6 address>/<mask>, the mask is number in range 0-128 eg. fd5d:12c9:2201:1::1/64
name string			Name of the Layer-3 interface to be configured eg. Ethernet1/2
provider string			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. For more information please see the CNOS Platform Options guide. A dict object containing connection details.
	auth_pass string		Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
	authorize boolean	Choices: no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
	host string / required		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	port string	Default: 22	Specifies the port to use when building the connection to the remote device.
	ssh_keyfile string		Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE`will be used instead.
	timeout string	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
state string		Choices: present ← absent	State of the Layer-3 interface configuration. It indicates if the configuration should be present or absent on remote device.

Notes

Note

Tested against CNOS 10.8.1

Examples

- name: Remove Ethernet1/33 IPv4 and IPv6 address
  community.network.cnos_l3_interface:
    name: Ethernet1/33
    state: absent

- name: Set Ethernet1/33 IPv4 address
  community.network.cnos_l3_interface:
    name: Ethernet1/33
    ipv4: 10.241.107.1/24

- name: Set Ethernet1/33 IPv6 address
  community.network.cnos_l3_interface:
    name: Ethernet1/33
    ipv6: "fd5d:12c9:2201:1::1/64"

- name: Set Ethernet1/33 in dhcp
  community.network.cnos_l3_interface:
    name: Ethernet1/33
    ipv4: dhcp
    ipv6: dhcp

- name: Set interface Vlan1 (SVI) IPv4 address
  community.network.cnos_l3_interface:
    name: Vlan1
    ipv4: 192.168.0.5/24

- name: Set IP addresses on aggregate
  community.network.cnos_l3_interface:
    aggregate:
      - { name: Ethernet1/33, ipv4: 10.241.107.1/24 }
      - { name: Ethernet1/44, ipv4: 10.240.106.1/24,
          ipv6: "fd5d:12c9:2201:1::1/64" }

- name: Remove IP addresses on aggregate
  community.network.cnos_l3_interface:
    aggregate:
      - { name: Ethernet1/33, ipv4: 10.241.107.1/24 }
      - { name: Ethernet1/44, ipv4: 10.240.106.1/24,
          ipv6: "fd5d:12c9:2201:1::1/64" }
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list / elements=string	always, except for the platforms that use Netconf transport to manage the device.	The list of configuration mode commands to send to the device Sample: ['interface Ethernet1/33', 'ip address 10.241.107.1 255.255.255.0', 'ipv6 address fd5d:12c9:2201:1::1/64']

Authors

Anil Kumar Muraleedharan (@amuraleedhar)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/latest/collections/community/network/cnos_l3_interface_module.html