QImageIOHandler Class

The QImageIOHandler class defines the common image I/O interface for all image formats in Qt. More...

Header:	#include <QImageIOHandler>
qmake:	QT += gui

• List of all members, including inherited members
• Obsolete members

Note: All functions in this class are reentrant.

Public Types

enum	ImageOption { Size, ClipRect, ScaledSize, ScaledClipRect, ..., TransformedByDefault }
enum	Transformation { TransformationNone, TransformationMirror, TransformationFlip, TransformationRotate180, ..., TransformationRotate270 }
flags	Transformations

Public Functions

	QImageIOHandler()
virtual	~QImageIOHandler()
virtual bool	canRead() const = 0
virtual int	currentImageNumber() const
virtual QRect	currentImageRect() const
QIODevice *	device() const
QByteArray	format() const
virtual int	imageCount() const
virtual bool	jumpToImage(int imageNumber)
virtual bool	jumpToNextImage()
virtual int	loopCount() const
virtual int	nextImageDelay() const
virtual QVariant	option(QImageIOHandler::ImageOption option) const
virtual bool	read(QImage *image) = 0
void	setDevice(QIODevice *device)
void	setFormat(const QByteArray &format)
void	setFormat(const QByteArray &format) const
virtual void	setOption(QImageIOHandler::ImageOption option, const QVariant &value)
virtual bool	supportsOption(QImageIOHandler::ImageOption option) const
virtual bool	write(const QImage &image)

Protected Variables

int

d_ptr

Detailed Description

The QImageIOHandler class defines the common image I/O interface for all image formats in Qt.

Qt uses QImageIOHandler for reading and writing images through QImageReader and QImageWriter. You can also derive from this class to write your own image format handler using Qt's plugin mechanism.

Call setDevice() to assign a device to the handler, and setFormat() to assign a format to it. One QImageIOHandler may support more than one image format. canRead() returns true if an image can be read from the device, and read() and write() return true if reading or writing an image was completed successfully.

QImageIOHandler also has support for animations formats, through the functions loopCount(), imageCount(), nextImageDelay() and currentImageNumber().

In order to determine what options an image handler supports, Qt will call supportsOption() and setOption(). Make sure to reimplement these functions if you can provide support for any of the options in the ImageOption enum.

To write your own image handler, you must at least reimplement canRead() and read(). Then create a QImageIOPlugin that can create the handler. Finally, install your plugin, and QImageReader and QImageWriter will then automatically load the plugin, and start using it.

See also QImageIOPlugin, QImageReader, and QImageWriter.

Member Type Documentation

enum QImageIOHandler::ImageOption

This enum describes the different options supported by QImageIOHandler. Some options are used to query an image for properties, and others are used to toggle the way in which an image should be written.

Constant	Value	Description
QImageIOHandler::Size	0	The original size of an image. A handler that supports this option is expected to read the size of the image from the image metadata, and return this size from option() as a QSize.
QImageIOHandler::ClipRect	1	The clip rect, or ROI (Region Of Interest). A handler that supports this option is expected to only read the provided QRect area from the original image in read(), before any other transformation is applied.
QImageIOHandler::ScaledSize	4	The scaled size of the image. A handler that supports this option is expected to scale the image to the provided size (a QSize), after applying any clip rect transformation (ClipRect). If the handler does not support this option, QImageReader will perform the scaling after the image has been read.
QImageIOHandler::ScaledClipRect	3	The scaled clip rect (or ROI, Region Of Interest) of the image. A handler that supports this option is expected to apply the provided clip rect (a QRect), after applying any scaling (ScaleSize) or regular clipping (ClipRect). If the handler does not support this option, QImageReader will apply the scaled clip rect after the image has been read.
QImageIOHandler::Description	2	The image description. Some image formats, such as GIF and PNG, allow embedding of text or comments into the image data (e.g., for storing copyright information). It's common that the text is stored in key-value pairs, but some formats store all text in one continuous block. QImageIOHandler returns the text as one QString, where keys and values are separated by a ':', and keys-value pairs are separated by two newlines (\n\n). For example, "Title: Sunset\n\nAuthor: Jim Smith\nSarah Jones\n\n". Formats that store text in a single block can use "Description" as the key.
QImageIOHandler::CompressionRatio	5	The compression ratio of the image data. A handler that supports this option is expected to set its compression rate depending on the value of this option (an int) when writing.
QImageIOHandler::Gamma	6	The gamma level of the image. A handler that supports this option is expected to set the image gamma level depending on the value of this option (a float) when writing.
QImageIOHandler::Quality	7	The quality level of the image. A handler that supports this option is expected to set the image quality level depending on the value of this option (an int) when writing.
QImageIOHandler::Name	8	The name of the image. A handler that supports this option is expected to read the name from the image metadata and return this as a QString, or when writing an image it is expected to store the name in the image metadata.
QImageIOHandler::SubType	9	The subtype of the image. A handler that supports this option can use the subtype value to help when reading and writing images. For example, a PPM handler may have a subtype value of "ppm" or "ppmraw".
QImageIOHandler::IncrementalReading	10	A handler that supports this option is expected to read the image in several passes, as if it was an animation. QImageReader will treat the image as an animation.
QImageIOHandler::Endianness	11	The endianness of the image. Certain image formats can be stored as BigEndian or LittleEndian. A handler that supports Endianness uses the value of this option to determine how the image should be stored.
QImageIOHandler::Animation	12	Image formats that support animation return true for this value in supportsOption(); otherwise, false is returned.
QImageIOHandler::BackgroundColor	13	Certain image formats allow the background color to be specified. A handler that supports BackgroundColor initializes the background color to this option (a QColor) when reading an image.
QImageIOHandler::ImageFormat	14	The image's data format returned by the handler. This can be any of the formats listed in QImage::Format.
QImageIOHandler::SupportedSubTypes	15	Image formats that support different saving variants should return a list of supported variant names (QList<QByteArray>) in this option.
QImageIOHandler::OptimizedWrite	16	. A handler which supports this option is expected to turn on optimization flags when writing.
QImageIOHandler::ProgressiveScanWrite	17	. A handler which supports this option is expected to write the image as a progressive scan image.
QImageIOHandler::ImageTransformation	18	. A handler which supports this option can read the transformation metadata of an image. A handler that supports this option should not apply the transformation itself.
QImageIOHandler::TransformedByDefault	19	. A handler that reports support for this feature will have image transformation metadata applied by default on read.

enum QImageIOHandler::Transformationflags QImageIOHandler::Transformations

This enum describes the different transformations or orientations supported by some image formats, usually through EXIF.

Constant	Value	Description
QImageIOHandler::TransformationNone	0	No transformation should be applied.
QImageIOHandler::TransformationMirror	1	Mirror the image horizontally.
QImageIOHandler::TransformationFlip	2	Mirror the image vertically.
QImageIOHandler::TransformationRotate180	TransformationMirror | TransformationFlip	Rotate the image 180 degrees. This is the same as mirroring it both horizontally and vertically.
QImageIOHandler::TransformationRotate90	4	Rotate the image 90 degrees.
QImageIOHandler::TransformationMirrorAndRotate90	TransformationMirror | TransformationRotate90	Mirror the image horizontally and then rotate it 90 degrees.
QImageIOHandler::TransformationFlipAndRotate90	TransformationFlip | TransformationRotate90	Mirror the image vertically and then rotate it 90 degrees.
QImageIOHandler::TransformationRotate270	TransformationRotate180 | TransformationRotate90	Rotate the image 270 degrees. This is the same as mirroring it both horizontally, vertically and then rotating it 90 degrees.

This enum was introduced or modified in Qt 5.5.

The Transformations type is a typedef for QFlags<Transformation>. It stores an OR combination of Transformation values.

See also QImageReader::transformation(), QImageReader::setAutoTransform(), and QImageWriter::setTransformation().

Member Function Documentation

QImageIOHandler::QImageIOHandler()

Constructs a QImageIOHandler object.

[virtual] QImageIOHandler::~QImageIOHandler()

Destructs the QImageIOHandler object.

[pure virtual] bool QImageIOHandler::canRead() const

Returns true if an image can be read from the device (i.e., the image format is supported, the device can be read from and the initial header information suggests that the image can be read); otherwise returns false.

When reimplementing canRead(), make sure that the I/O device (device()) is left in its original state (e.g., by using peek() rather than read()).

See also read() and QIODevice::peek().

[virtual] int QImageIOHandler::currentImageNumber() const

For image formats that support animation, this function returns the sequence number of the current image in the animation. If this function is called before any image is read(), -1 is returned. The number of the first image in the sequence is 0.

If the image format does not support animation, 0 is returned.

See also read().

[virtual] QRect QImageIOHandler::currentImageRect() const

Returns the rect of the current image. If no rect is defined for the image, and empty QRect() is returned.

This function is useful for animations, where only parts of the frame may be updated at a time.

QIODevice *QImageIOHandler::device() const

Returns the device currently assigned to the QImageIOHandler. If not device has been assigned, 0 is returned.

See also setDevice().

QByteArray QImageIOHandler::format() const

Returns the format that is currently assigned to QImageIOHandler. If no format has been assigned, an empty string is returned.

See also setFormat().

[virtual] int QImageIOHandler::imageCount() const

For image formats that support animation, this function returns the number of images in the animation. If the image format does not support animation, or if it is unable to determine the number of images, 0 is returned.

The default implementation returns 1 if canRead() returns true; otherwise 0 is returned.

[virtual] bool QImageIOHandler::jumpToImage(int imageNumber)

For image formats that support animation, this function jumps to the image whose sequence number is imageNumber. The next call to read() will attempt to read this image.

The default implementation does nothing, and returns false.

[virtual] bool QImageIOHandler::jumpToNextImage()

For image formats that support animation, this function jumps to the next image.

The default implementation does nothing, and returns false.

[virtual] int QImageIOHandler::loopCount() const

For image formats that support animation, this function returns the number of times the animation should loop. If the image format does not support animation, 0 is returned.

[virtual] int QImageIOHandler::nextImageDelay() const

For image formats that support animation, this function returns the number of milliseconds to wait until reading the next image. If the image format does not support animation, 0 is returned.

[virtual] QVariant QImageIOHandler::option(QImageIOHandler::ImageOption option) const

Returns the value assigned to option as a QVariant. The type of the value depends on the option. For example, option(Size) returns a QSize variant.

See also setOption() and supportsOption().

[pure virtual] bool QImageIOHandler::read(QImage *image)

Read an image from the device, and stores it in image. Returns true if the image is successfully read; otherwise returns false.

For image formats that support incremental loading, and for animation formats, the image handler can assume that image points to the previous frame.

See also canRead().

void QImageIOHandler::setDevice(QIODevice *device)

Sets the device of the QImageIOHandler to device. The image handler will use this device when reading and writing images.

The device can only be set once and must be set before calling canRead(), read(), write(), etc. If you need to read multiple files, construct multiple instances of the appropriate QImageIOHandler subclass.

See also device().

void QImageIOHandler::setFormat(const QByteArray &format)

Sets the format of the QImageIOHandler to format. The format is most useful for handlers that support multiple image formats.

See also format().

void QImageIOHandler::setFormat(const QByteArray &format) const

Sets the format of the QImageIOHandler to format. The format is most useful for handlers that support multiple image formats.

This function is declared const so that it can be called from canRead().

See also format().

[virtual] void QImageIOHandler::setOption(QImageIOHandler::ImageOption option, const QVariant &value)

Sets the option option with the value value.

See also option() and ImageOption.

[virtual] bool QImageIOHandler::supportsOption(QImageIOHandler::ImageOption option) const

Returns true if the QImageIOHandler supports the option option; otherwise returns false. For example, if the QImageIOHandler supports the Size option, supportsOption(Size) must return true.

See also setOption() and option().

[virtual] bool QImageIOHandler::write(const QImage &image)

Writes the image image to the assigned device. Returns true on success; otherwise returns false.

The default implementation does nothing, and simply returns false.