arista.eos.eos_ospfv3 – OSPFv3 resource module

Note

This plugin is part of the arista.eos collection (version 1.2.0).

To install it use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_ospfv3.

New in version 1.1.0: of arista.eos

Synopsis
Parameters
Notes
Examples

Synopsis

This module configures and manages the attributes of ospfv3 on Arista EOS platforms.

Note

This module has a corresponding action plugin.

Parameters

Parameter							Choices/Defaults	Comments
config dictionary								A list of configurations for ospfv3.
	processes list / elements=dictionary							A list of dictionary specifying the ospfv3 processes.
		address_family list / elements=dictionary						Enable address family and enter its config mode
			adjacency dictionary					Configure adjacency options for OSPF instance.
				exchange_start dictionary				Configure exchange-start options for OSPF instance.
					threshold integer			Number of peers to bring up simultaneously.
			afi string				Choices: ipv4 ipv6	address family .
			areas list / elements=dictionary					Specifies the configuration for OSPF areas
				area_id string				Specifies a 32 bit number expressed in decimal or dotted-decimal notation.
				authentication dictionary				Configure authentication for the area incase of ospfv3.
					algorithm string		Choices: md5 sha1	Name of algorithm to be used.
					encrypt_key boolean		Choices: no yes	If False, key string is not encrypted
					hidden_key boolean		Choices: no yes	If True, Specifies that a HIDDEN key will follow.
					key string			128 bit MD5 key or 140 bit SHA1 key.
					passphrase string			Passphrase String for deriving keys for authentication and encryption.
					spi integer			Specify the SPI value
				default_cost integer				Specify the cost for default summary route in stub/NSSA area.
				encryption dictionary				Configure encryption for the area
					algorithm string		Choices: sha1 md5	name of the algorithm to be used.
					encrypt_key boolean		Choices: no yes	If False, key string is not encrypted
					encryption string		Choices: 3des-cbc aes-128-cbc aes-192-cbc aes-256-cbc null	name of encryption to be used.
					hidden_key boolean		Choices: no yes	If True, Specifies that a HIDDEN key will follow.
					key string			128 bit MD5 key or 140 bit SHA1 key.
					passphrase string			Passphrase String for deriving keys for authentication and encryption.
					spi integer			Specify the SPI value
				nssa dictionary				Configures NSSA parameters.
					default_information_originate dictionary			Originate default Type 7 LSA.
						metric integer		Metric for default route.
						metric_type integer		Metric type for default route.
						nssa_only boolean	Choices: no yes	Limit default advertisement to this NSSA area.
						set boolean	Choices: no yes	True if only default information orignate is set
					no_summary boolean		Choices: no yes	Filter all type-3 LSAs in the nssa area.
					nssa_only boolean		Choices: no yes	Disable Type-7 LSA p-bit setting
					set boolean		Choices: no yes	True if only nssa is set
					translate boolean		Choices: no yes	Enable LSA translation.
				ranges list / elements=dictionary				Configure route summarization.
					address string			IP address.
					advertise boolean		Choices: no yes	Enable Advertisement of the range.
					cost integer			Configures the metric.
					subnet_address string			IP address with mask length
					subnet_mask string			IP subnet mask
				stub dictionary				Stub area.
					set boolean		Choices: no yes	True if only stub is set
					summary_lsa boolean		Choices: no yes	If False , Filter all type-3 LSAs in the stub area.
			auto_cost dictionary					Set auto-cost.
				reference_bandwidth integer				reference bandwidth in megabits per sec.
			bfd dictionary					Enable BFD.
				all_interfaces boolean			Choices: no yes	Enable BFD on all interfaces.
			default_information dictionary					Control distribution of default information.
				always boolean			Choices: no yes	Always advertise default route.
				metric integer				Metric for default route.
				metric_type integer				Metric type for default route.
				originate boolean			Choices: no yes	Distribute a default route.
				route_map string				Specify which route-map to use.
			default_metric integer					Configure the default metric for redistributed routes.
			distance integer					Specifies the administrative distance for routes.
			fips_restrictions boolean				Choices: no yes	Use FIPS compliant algorithms
			graceful_restart dictionary					Enable graceful restart mode.
				grace_period integer				Specify maximum time to wait for graceful-restart to complete.
				set boolean			Choices: no yes	When true sets the grace_fulrestart config alone.
			graceful_restart_helper boolean				Choices: no yes	If True, Enable graceful restart helper.
			log_adjacency_changes dictionary					To configure link-state changes and transitions of OSPFv3 neighbors.
				detail boolean			Choices: no yes	If true , configures the switch to log all link-state changes.
				set boolean			Choices: no yes	When true sets the log_adjacency_changes config alone.
			max_metric dictionary					Set maximum metric.
				router_lsa dictionary				Maximum metric in self-originated router-LSAs.
					external_lsa dictionary			Override external-lsa metric with max-metric value.
						max_metric_value integer		Set max metric value for external LSAs.
						set boolean	Choices: no yes	Set external-lsa attribute.
					include_stub boolean		Choices: no yes	Set maximum metric for stub links in router-LSAs.
					on_startup dictionary			Set maximum metric temporarily after reboot.
						wait_for_bgp boolean	Choices: no yes	Let BGP decide when to originate router-LSA with normal metric
						wait_period integer		Wait period in seconds after startup.
					set boolean		Choices: no yes	Set router-lsa attribute.
					summary_lsa dictionary			Override summary-lsa metric with max-metric value.
						max_metric_value integer		Set max metric value for external LSAs.
						set boolean	Choices: no yes	Set external-lsa attribute.
			maximum_paths integer					Maximum number of next-hops in an ECMP route.
			passive_interface boolean				Choices: no yes	Include interface but without actively running OSPF.
			redistribute list / elements=dictionary					Specifies the routes to be redistributed.
				route_map string				Specify which route map to use.
				routes string			Choices: bgp connected static	Route types (BGP,static,connected)
			router_id string					32-bit number assigned to a router running OSPFv3.
			shutdown boolean				Choices: no yes	Disable the OSPF instance.
			timers dictionary					Configure OSPF timers.
				lsa integer				Configure OSPF LSA timers.
				out_delay integer				Configure out-delay timer.
				pacing integer				Configure OSPF packet pacing.
				throttle dictionary				Configure SPF timers
					initial integer			Initial SPF schedule delay in msecs.
					lsa boolean		Choices: no yes	Configure threshold for retransmission of lsa
					max integer			Max wait time between two SPFs in msecs.
					min integer			Min Hold time between two SPFs in msecs
					spf boolean		Choices: no yes	Configure time between SPF calculations
		adjacency dictionary						Configure adjacency options for OSPF instance.
			exchange_start dictionary					Configure exchange-start options for OSPF instance.
				threshold integer				Number of peers to bring up simultaneously.
		areas list / elements=dictionary						Specifies the configuration for OSPF areas
			area_id string					Specifies a 32 bit number expressed in decimal or dotted-decimal notation.
			authentication dictionary					Configure authentication for the area incase of ospfv3.
				algorithm string			Choices: md5 sha1	Name of algorithm to be used.
				encrypt_key boolean			Choices: no yes	If False, key string is not encrypted
				hidden_key boolean			Choices: no yes	If True, Specifies that a HIDDEN key will follow.
				key string				128 bit MD5 key or 140 bit SHA1 key.
				passphrase string				Passphrase String for deriving keys for authentication and encryption.
				spi integer				Specify the SPI value
			default_cost integer					Specify the cost for default summary route in stub/NSSA area.
			encryption dictionary					Configure encryption for the area
				algorithm string			Choices: sha1 md5	name of the algorithm to be used.
				encrypt_key boolean			Choices: no yes	If False, key string is not encrypted
				encryption string			Choices: 3des-cbc aes-128-cbc aes-192-cbc aes-256-cbc null	name of encryption to be used.
				hidden_key boolean			Choices: no yes	If True, Specifies that a HIDDEN key will follow.
				key string				128 bit MD5 key or 140 bit SHA1 key.
				passphrase string				Passphrase String for deriving keys for authentication and encryption.
				spi integer				Specify the SPI value
			nssa dictionary					Configures NSSA parameters.
				default_information_originate dictionary				Originate default Type 7 LSA.
					metric integer			Metric for default route.
					metric_type integer			Metric type for default route.
					nssa_only boolean		Choices: no yes	Limit default advertisement to this NSSA area.
					set boolean		Choices: no yes	True if only default information orignate is set
				no_summary boolean			Choices: no yes	Filter all type-3 LSAs in the nssa area.
				nssa_only boolean			Choices: no yes	Disable Type-7 LSA p-bit setting
				set boolean			Choices: no yes	True if only nssa is set
				translate boolean			Choices: no yes	Enable LSA translation.
			stub dictionary					Stub area.
				set boolean			Choices: no yes	True if only stub is set.
				summary_lsa boolean			Choices: no yes	If False , Filter all type-3 LSAs in the stub area.
		auto_cost dictionary						Set auto-cost.
			reference_bandwidth integer					reference bandwidth in megabits per sec.
		bfd dictionary						Enable BFD.
			all_interfaces boolean				Choices: no yes	Enable BFD on all interfaces.
		fips_restrictions boolean					Choices: no yes	Use FIPS compliant algorithms
		graceful_restart dictionary						Enable graceful restart mode.
			grace_period integer					Specify maximum time to wait for graceful-restart to complete.
			set boolean				Choices: no yes	When true sets the grace_fulrestart config alone.
		graceful_restart_helper boolean					Choices: no yes	If True, Enable graceful restart helper.
		log_adjacency_changes dictionary						To configure link-state changes and transitions of OSPFv3 neighbors.
			detail boolean				Choices: no yes	If true , configures the switch to log all link-state changes.
			set boolean				Choices: no yes	When true sets the log_adjacency_changes config alone.
		max_metric dictionary						Set maximum metric.
			router_lsa dictionary					Maximum metric in self-originated router-LSAs.
				external_lsa dictionary				Override external-lsa metric with max-metric value.
					max_metric_value integer			Set max metric value for external LSAs.
					set boolean		Choices: no yes	Set external-lsa attribute.
				include_stub boolean			Choices: no yes	Set maximum metric for stub links in router-LSAs.
				on_startup dictionary				Set maximum metric temporarily after reboot.
					wait_for_bgp boolean		Choices: no yes	Let BGP decide when to originate router-LSA with normal metric
					wait_period integer			Wait period in seconds after startup.
				set boolean			Choices: no yes	Set router-lsa attribute.
				summary_lsa dictionary				Override summary-lsa metric with max-metric value.
					max_metric_value integer			Set max metric value for external LSAs.
					set boolean		Choices: no yes	Set external-lsa attribute.
		passive_interface boolean					Choices: no yes	Include interface but without actively running OSPF.
		router_id string						32-bit number assigned to a router running OSPFv3.
		shutdown boolean					Choices: no yes	Disable the OSPF instance.
		timers dictionary						Configure OSPF timers.
			lsa integer					Configure OSPF LSA timers.
			out_delay integer					Configure out-delay timer.
			pacing integer					Configure OSPF packet pacing.
			throttle dictionary					Configure SPF timers
				initial integer				Initial SPF schedule delay in msecs.
				lsa boolean			Choices: no yes	Configure threshold for retransmission of lsa
				max integer				Max wait time between two SPFs in msecs.
				min integer				Min Hold time between two SPFs in msecs
				spf boolean			Choices: no yes	Configure time between SPF calculations
		vrf string						VRF name .
running_config string								This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config \| section ospfv3. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state string							Choices: deleted merged ← overridden replaced gathered rendered parsed	The state the configuration should be left in.

Notes

Note

Tested against Arista EOS 4.23.0F
This module works with connection network_cli. See the EOS Platform Options.

Examples

# Using merged

# Before state

# veos#show running-config | section ospfv3
# veos#


  -  arista.eos.eos_ospfv3:
      config:
        processes:
          - address_family:
              - timers:
                  lsa: 22
                graceful_restart:
                  grace_period: 35
                afi: "ipv6"
            timers:
              pacing: 55
            fips_restrictions: True
            router_id: "2.2.2.2"
            vrf: "vrfmerge"


# After state

# veos#show running-config | section ospfv3
# router ospfv3 vrf vrfmerge
#    router-id 2.2.2.2
#    fips restrictions
#    timers pacing flood 55
#    !
#    address-family ipv6
#       fips restrictions
#       timers lsa arrival 22
#       graceful-restart grace-period 35
# veos#

# Module Execution
#     "after": {
#         "processes": [
#             {
#                 "address_family": [
#                     {
#                         "afi": "ipv6",
#                         "fips_restrictions": true,
#                         "graceful_restart": {
#                             "grace_period": 35
#                         },
#                         "timers": {
#                             "lsa": 22
#                         }
#                     }
#                 ],
#                 "fips_restrictions": true,
#                 "router_id": "2.2.2.2",
#                 "timers": {
#                     "pacing": 55
#                 },
#                 "vrf": "vrfmerge"
#             }
#         ]
#     },
#     "before": {},
#     "changed": true,
#     "commands": [
#         "router ospfv3 vrf vrfmerge",
#         "address-family ipv6",
#         "graceful-restart grace-period 35",
#         "timers lsa arrival 22",
#         "exit",
#         "timers pacing flood 55",
#         "fips restrictions",
#         "router-id 2.2.2.2",
#         "exit"
#     ],


# using replaced

# before state

# veos#show running-config | section ospfv3
# router ospfv3
#    fips restrictions
#    area 0.0.0.0 encryption ipsec spi 43 esp null md5 passphrase 7 h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4=
# !
# router ospfv3 vrf vrfmerge
#    router-id 2.2.2.2
#    fips restrictions
#    timers pacing flood 55
#    !
#    address-family ipv6
#       fips restrictions
#       timers lsa arrival 22
#       graceful-restart grace-period 35
# veos#


  - arista.eos.eos_ospfv3:
      config:
        processes:
          - areas:
              - area_id: "0.0.0.0"
                encryption:
                  spi: 43
                  encryption: "null"
                  algorithm: "md5"
                  encrypt_key: False
                  passphrase: "7hl8FV3lZ6H1mAKpjL47hQ=="
            vrf: "default"
            address_family:
              - afi: "ipv4"
                router_id: "7.1.1.1"
      state: replaced

# After state
# veos#show running-config | section ospfv3
# router ospfv3
#    area 0.0.0.0 encryption ipsec spi 43 esp null md5 passphrase 7 h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4=
# !
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
# veos#

# Module execution

# "after": {
#     "processes": [
#         {
#             "areas": [
#                 {
#                     "area_id": "0.0.0.0",
#                     "encryption": {
#                         "algorithm": "md5",
#                         "encryption": "null",
#                         "hidden_key": true,
#                         "passphrase": "h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4="
#                     }
#                 }
#             ],
#             "vrf": "default"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ]
#                 }
#             ],
#             "passive_interface": true,
#             "vrf": "vrfmerge"
#         }
#     ]
# },
# "before": {
#     "processes": [
#         {
#             "areas": [
#                 {
#                     "area_id": "0.0.0.0",
#                     "encryption": {
#                         "algorithm": "md5",
#                         "encryption": "null",
#                         "hidden_key": true,
#                         "passphrase": "h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4="
#                     }
#                 }
#             ],
#             "fips_restrictions": true,
#             "vrf": "default"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "fips_restrictions": true,
#                     "graceful_restart": {
#                         "grace_period": 35
#                     },
#                     "timers": {
#                         "lsa": 22
#                     }
#                 }
#             ],
#             "fips_restrictions": true,
#             "router_id": "2.2.2.2",
#             "timers": {
#                 "pacing": 55
#             },
#             "vrf": "vrfmerge"
#         }
#     ]
# },
# "changed": true,
# "commands": [
#     "router ospfv3 vrf vrfmerge",
#     "address-family ipv6",
#     "no fips restrictions",
#     "no graceful-restart",
#     "no timers lsa arrival 22",
#     "area 0.0.0.3 range 10.1.2.2/24 advertise",
#     "area 0.0.0.3 range 60.1.1.1 255.255.0.0 cost 30",
#     "exit",
#     "passive-interface default",
#     "no router-id",
#     "no fips restrictions",
#     "no timers pacing flood 55",
#     "exit"
# ],


# using overridden

# before state

# veos#show running-config | section ospfv3
# router ospfv3
#    area 0.0.0.0 encryption ipsec spi 43 esp null md5 passphrase 7 h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4=
# !
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
# veos#


  -  arista.eos.eos_ospfv3:
      config:
        processes:
          - address_family:
              - areas:
                  - area_id: "0.0.0.3"
                    ranges:
                      - address: 10.1.2.2/24
                        advertise: True
                      - address: 60.1.1.1
                        subnet_mask: 255.255.0.0
                        cost: 30
                afi: "ipv6"
            passive_interface: True
            vrf: "vrfmerge"
      state: overridden

# After state

# veos#show running-config | section ospfv3
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
# veos#



# Module execution

# "after": {
#     "processes": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ]
#                 }
#             ],
#             "passive_interface": true,
#             "vrf": "vrfmerge"
#         }
#     ]
# },
# "before": {
#     "processes": [
#         {
#             "areas": [
#                 {
#                     "area_id": "0.0.0.0",
#                     "encryption": {
#                         "algorithm": "md5",
#                         "encryption": "null",
#                         "hidden_key": true,
#                         "passphrase": "h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4="
#                     }
#                 }
#             ],
#             "vrf": "default"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv6",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ]
#                 }
#             ],
#             "passive_interface": true,
#             "vrf": "vrfmerge"
#         }
#     ]
# },
# "changed": true,
# "commands": [
#     "no router ospfv3",
#     "router ospfv3 vrf vrfmerge",
#     "address-family ipv6",
#     "no area 0.0.0.3 range 10.1.2.0/24",
#     "no area 0.0.0.3 range 60.1.0.0/16 cost 30",
#     "area 0.0.0.3 range 10.1.2.2/24 advertise",
#     "area 0.0.0.3 range 60.1.1.1 255.255.0.0 cost 30",
#     "exit",
#     "exit"
# ],

# using deleted

# Before state

# veos#show running-config | section ospfv3
# router ospfv3
#    area 0.0.0.0 encryption ipsec spi 43 esp null md5 passphrase 7 h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4=
# !
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv4
#       redistribute connected
#       redistribute static route-map MAP01
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
# veos#


  -  arista.eos.eos_ospfv3:
      config:
        processes:
          - vrf: "default"
      state: deleted

# After state

# veos#show running-config | section ospfv3
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv4
#       redistribute connected
#       redistribute static route-map MAP01
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
# veos#


# Module execution
# "after": {
#     "processes": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ],
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         },
#                         {
#                             "route_map": "MAP01",
#                             "routes": "static"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ]
#                 }
#             ],
#             "passive_interface": true,
#             "vrf": "vrfmerge"
#         }
#     ]
# },
# "before": {
#     "processes": [
#         {
#             "areas": [
#                 {
#                     "area_id": "0.0.0.0",
#                     "encryption": {
#                         "algorithm": "md5",
#                         "encryption": "null",
#                         "hidden_key": true,
#                         "passphrase": "h8pZp9eprTYjjoY/NKFFe0Ei7x03Y7dyLotRhI0a5t4="
#                     }
#                 }
#             ],
#             "vrf": "default"
#         },
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ],
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         },
#                         {
#                             "route_map": "MAP01",
#                             "routes": "static"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ]
#                 }
#             ],
#             "passive_interface": true,
#             "vrf": "vrfmerge"
#         }
#     ]
# },
# "changed": true,
# "commands": [
#     "no router ospfv3"
# ],

# using parsed

# parsed_ospfv3.cfg

# router ospfv3
#    fips restrictions
#    area 0.0.0.20 stub
#    area 0.0.0.20 authentication ipsec spi 33 sha1 passphrase 7 4O8T3zo4xBdRWXBnsnK934o9SEb+jEhHUN6+xzZgCo2j9EnQBUvtwNxxLEmYmm6w
#    area 0.0.0.40 default-cost 45
#    area 0.0.0.40 stub
#    timers pacing flood 7
#    adjacency exchange-start threshold 11
#    !
#    address-family ipv4
#       fips restrictions
#       redistribute connected
#    !
#    address-family ipv6
#       router-id 10.1.1.1
#       fips restrictions
# !
# router ospfv3 vrf vrf01
#    bfd all-interfaces
#    fips restrictions
#    area 0.0.0.0 encryption ipsec spi 256 esp null sha1 passphrase 7 7hl8FV3lZ6H1mAKpjL47hQ==
#    log-adjacency-changes detail
#    !
#    address-family ipv4
#       passive-interface default
#       fips restrictions
#       redistribute connected route-map MAP01
#       maximum-paths 100
#    !
#    address-family ipv6
#       fips restrictions
#       area 0.0.0.10 nssa no-summary
#       default-information originate route-map DefaultRouteFilter
#       max-metric router-lsa external-lsa 25 summary-lsa
# !
# router ospfv3 vrf vrf02
#    fips restrictions
#    !
#    address-family ipv6
#       router-id 10.17.0.3
#       distance ospf intra-area 200
#       fips restrictions
#       area 0.0.0.1 stub
#       timers throttle spf 56 56 56
#       timers out-delay 10


  -  arista.eos.eos_ospfv3:
      running_config: "{{ lookup('file', './parsed_ospfv3.cfg') }}"
      state: parsed

# Module execution

# "parsed": {
#         "processes": [
#             {
#                 "address_family": [
#                     {
#                         "afi": "ipv4",
#                         "fips_restrictions": true,
#                         "redistribute": [
#                             {
#                                 "routes": "connected"
#                             }
#                         ]
#                     },
#                     {
#                         "afi": "ipv6",
#                         "fips_restrictions": true,
#                         "router_id": "10.1.1.1"
#                     }
#                 ],
#                 "adjacency": {
#                     "exchange_start": {
#                         "threshold": 11
#                     }
#                 },
#                 "areas": [
#                     {
#                         "area_id": "0.0.0.20",
#                         "authentication": {
#                             "algorithm": "sha1",
#                             "hidden_key": true,
#                             "passphrase": "4O8T3zo4xBdRWXBnsnK934o9SEb+jEhHUN6+xzZgCo2j9EnQBUvtwNxxLEmYmm6w",
#                             "spi": 33
#                         },
#                         "stub": {
#                             "set": true
#                         }
#                     },
#                     {
#                         "area_id": "0.0.0.40",
#                         "default_cost": 45,
#                         "stub": {
#                             "set": true
#                         }
#                     }
#                 ],
#                 "fips_restrictions": true,
#                 "timers": {
#                     "pacing": 7
#                 },
#                 "vrf": "default"
#             },
#             {
#                 "address_family": [
#                     {
#                         "afi": "ipv4",
#                         "fips_restrictions": true,
#                         "maximum_paths": 100,
#                         "passive_interface": true,
#                         "redistribute": [
#                             {
#                                 "route_map": "MAP01",
#                                 "routes": "connected"
#                             }
#                         ]
#                     },
#                     {
#                         "afi": "ipv6",
#                         "areas": [
#                             {
#                                 "area_id": "0.0.0.10",
#                                 "nssa": {
#                                     "no_summary": true
#                                 }
#                             }
#                         ],
#                         "default_information": {
#                             "originate": true,
#                             "route_map": "DefaultRouteFilter"
#                         },
#                         "fips_restrictions": true,
#                         "max_metric": {
#                             "router_lsa": {
#                                 "external_lsa": {
#                                     "max_metric_value": 25
#                                 },
#                                 "summary_lsa": {
#                                     "set": true
#                                 }
#                             }
#                         }
#                     }
#                 ],
#                 "areas": [
#                     {
#                         "area_id": "0.0.0.0",
#                         "encryption": {
#                             "algorithm": "sha1",
#                             "encryption": "null",
#                             "hidden_key": true,
#                             "passphrase": "7hl8FV3lZ6H1mAKpjL47hQ=="
#                         }
#                     }
#                 ],
#                 "bfd": {
#                     "all_interfaces": true
#                 },
#                 "fips_restrictions": true,
#                 "log_adjacency_changes": {
#                     "detail": true
#                 },
#                 "vrf": "vrf01"
#             },
#             {
#                 "address_family": [
#                     {
#                         "afi": "ipv6",
#                         "areas": [
#                             {
#                                 "area_id": "0.0.0.1",
#                                 "stub": {
#                                     "set": true
#                                 }
#                             }
#                         ],
#                         "distance": 200,
#                         "fips_restrictions": true,
#                         "router_id": "10.17.0.3",
#                         "timers": {
#                             "out_delay": 10,
#                             "throttle": {
#                                 "initial": 56,
#                                 "max": 56,
#                                 "min": 56,
#                                 "spf": true
#                             }
#                         }
#                     }
#                 ],
#                 "fips_restrictions": true,
#                 "vrf": "vrf02"
#             }
#         ]

# using gathered

# native config

# veos#show running-config | section ospfv3
# router ospfv3 vrf vrfmerge
#    passive-interface default
#    !
#    address-family ipv4
#       redistribute connected
#       redistribute static route-map MAP01
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
#    !
#    address-family ipv6
#       area 0.0.0.3 range 10.1.2.0/24
#       area 0.0.0.3 range 60.1.0.0/16 cost 30
# veos#


  -  arista.eos.eos_ospfv3:
      state: gathered

# module execution

# "gathered": {
#     "processes": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ],
#                     "redistribute": [
#                         {
#                             "routes": "connected"
#                         },
#                         {
#                             "route_map": "MAP01",
#                             "routes": "static"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "areas": [
#                         {
#                             "area_id": "0.0.0.3",
#                             "ranges": [
#                                 {
#                                     "address": "10.1.2.0/24"
#                                 },
#                                 {
#                                     "address": "60.1.0.0/16",
#                                     "cost": 30
#                                 }
#                             ]
#                         }
#                     ]
#                 }
#             ],
#             "passive_interface": true,
#             "vrf": "vrfmerge"
#         }
#     ]

# using rendered

  -  arista.eos.eos_ospfv3:
      config:
        processes:
          - address_family:
              - timers:
                  lsa: 22
                graceful_restart:
                  grace_period: 35
                afi: "ipv6"
            timers:
              pacing: 55
            fips_restrictions: True
            router_id: "2.2.2.2"
            vrf: "vrfmerge"
      state: rendered

# module execution

# "rendered": [
#         "router ospfv3 vrf vrfmerge",
#         "address-family ipv6",
#         "graceful-restart grace-period 35",
#         "timers lsa arrival 22",
#         "exit",
#         "timers pacing flood 55",
#         "fips restrictions",
#         "router-id 2.2.2.2",
#         "exit"
#     ]

Authors

Gomathi Selvi Srinivasan (@GomathiselviS)

© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.10/collections/arista/eos/eos_ospfv3_module.html