junos_l3_interfaces – Manage Layer 3 interface on Juniper JUNOS devices

• Synopsis
• Requirements
• Parameters
• Notes
• Examples
• Return Values
• Status

Synopsis

• This module provides declarative management of a Layer 3 interface on Juniper JUNOS devices

Requirements

The below requirements are needed on the host that executes this module.

• ncclient (>=v0.6.4)

Parameters

Notes

Examples

# Using deleted

# Before state:
# -------------
#
# admin# show interfaces
# ge-0/0/1 {
#     description "L3 interface";
#     unit 0 {
#         family inet {
#             address 10.200.16.10/24;
#         }
#     }
# }
# ge-0/0/2 {
#     description "non L3 interface";
#     unit 0 {
#         family ethernet-switching {
#             interface-mode access;
#             vlan {
#                 members 2;
#             }
#         }
#     }
# }

- name: Delete JUNOS L3 logical interface
  junos_l3_interfaces:
    config:
      - name: ge-0/0/1
      - name: ge-0/0/2
  state: deleted

# After state:
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
#     description "deleted L3 interface";
# }
# ge-0/0/2 {
#     description "non L3 interface";
#     unit 0 {
#         family ethernet-switching {
#             interface-mode access;
#             vlan {
#                 members 2;
#             }
#         }
#     }
# }


# Using merged

# Before state
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
#     description "L3 interface";
#     unit 0 {
#         family inet {
#             address 10.200.16.10/24;
#         }
#     }
# }
# ge-0/0/2 {
#     description "non configured interface";
#     unit 0;
# }

- name: Merge provided configuration with device configuration (default operation is merge)
  junos_l3_interfaces:
    config:
      - name: ge-0/0/1
        ipv4:
           - address: 192.168.1.10/24
        ipv6:
           - address: 8d8d:8d01::1/64
      - name: ge-0/0/2
        ipv4:
           - address: dhcp
    state: merged

# After state:
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
#     description "L3 interface";
#     unit 0 {
#         family inet {
#             address 10.200.16.10/24;
#             address 192.168.1.10/24;
#         }
#         family inet6 {
#             address 8d8d:8d01::1/64;
#         }
#     }
# }
# ge-0/0/2 {
#     description "L3 interface with dhcp";
#     unit 0 {
#         family inet {
#             dhcp;
#         }
#     }
# }


# Using overridden

# Before state
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
#     description "L3 interface";
#     unit 0 {
#         family inet {
#             address 10.200.16.10/24;
#         }
#     }
# }
# ge-0/0/2 {
#     description "L3 interface with dhcp";
#     unit 0 {
#         family inet {
#             dhcp;
#         }
#     }
# }
# ge-0/0/3 {
#     description "another L3 interface";
#     unit 0 {
#         family inet {
#             address 192.168.1.10/24;
#         }
#     }
# }

- name: Override provided configuration with device configuration
  junos_l3_interfaces:
    config:
      - name: ge-0/0/1
        ipv4:
           - address: 192.168.1.10/24
        ipv6:
           - address: 8d8d:8d01::1/64
      - name: ge-0/0/2
        ipv6:
           - address: 2001:db8:3000::/64
    state: overridden

# After state:
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
#     description "L3 interface";
#     unit 0 {
#         family inet {
#             address 192.168.1.10/24;
#         }
#         family inet6 {
#             address 8d8d:8d01::1/64;
#         }
#     }
# }
# ge-0/0/2 {
#     description "L3 interface with ipv6";
#     unit 0 {
#         family inet6 {
#             address 2001:db8:3000::/64;
#         }
#     }
# }
# ge-0/0/3 {
#     description "overridden L3 interface";
#     unit 0;
# }


# Using replaced

# Before state
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
#     description "L3 interface";
#     unit 0 {
#         family inet {
#             address 10.200.16.10/24;
#         }
#     }
# }
# ge-0/0/2 {
#     description "non configured interface";
#     unit 0;
# }
# ge-0/0/3 {
#     description "another L3 interface";
#     unit 0 {
#         family inet {
#             address 192.168.1.10/24;
#         }
#     }
# }

- name: Replace provided configuration with device configuration
  junos_l3_interfaces:
    config:
      - name: ge-0/0/1
        ipv4:
           - address: 192.168.1.10/24
        ipv6:
           - address: 8d8d:8d01::1/64
      - name: ge-0/0/2
        ipv4:
           - address: dhcp
    state: replaced

# After state:
# ------------
#
# admin# show interfaces
# ge-0/0/1 {
#     description "L3 interface";
#     unit 0 {
#         family inet {
#             address 192.168.1.10/24;
#         }
#         family inet6 {
#             address 8d8d:8d01::1/64;
#         }
#     }
# }
# ge-0/0/2 {
#     description "L3 interface with dhcp";
#     unit 0 {
#         family inet {
#             dhcp;
#         }
#     }
# }
# ge-0/0/3 {
#     description "another L3 interface";
#     unit 0 {
#         family inet {
#             address 192.168.1.10/24;
#         }
#     }
# }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]
• This module is maintained by the Ansible Network Team. [network]

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

• Daniel Mellado (@dmellado)