junos_l2_interfaces – Manage Layer-2 interface on Juniper JUNOS devices

• Synopsis
• Requirements
• Parameters
• Notes
• Examples
• Return Values
• Status

Synopsis

• This module provides declarative management of a Layer-2 interface on Juniper JUNOS devices.

Requirements

The below requirements are needed on the host that executes this module.

• ncclient (>=v0.6.4)

Parameters

Notes

Examples

# Using deleted

# Before state:
# -------------
#
# ansible@junos01# show interfaces
# ge-0/0/1 {
#    description "L2 interface";
#    speed 1g;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode access;
#            vlan {
#                members vlan30;
#            }
#        }
#    }
#}
#ge-0/0/2 {
#    description "non L2 interface";
#    unit 0 {
#        family inet {
#            address 192.168.56.14/24;
#        }
#    }

- name: "Delete L2 attributes of given interfaces (Note: This won't delete the interface itself)."
  junos_l2_interfaces:
    config:
      - name: ge-0/0/1
      - name: ge-0/0/2
    state: deleted

# After state:
# ------------
#
# ansible@junos01# show interfaces
# ge-0/0/1 {
#    description "L2 interface";
#    speed 1g;
# }
#ge-0/0/2 {
#    description "non L2 interface";
#    unit 0 {
#        family inet {
#            address 192.168.56.14/24;
#        }
#    }


# Using merged

# Before state:
# -------------
# ansible@junos01# show interfaces
# ge-0/0/3 {
#    description "test interface";
#    speed 1g;
#}
# ge-0/0/4 {
#    description interface-trunk;
#    native-vlan-id 100;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode trunk;
#            vlan {
#                members [ vlan40 ];
#            }
#        }
#    }
# }

- name: "Merge provided configuration with device configuration (default operation is merge)"
  junos_l2_interfaces:
    config:
      - name: ge-0/0/3
        access:
          vlan: v101
      - name: ge-0/0/4
        trunk:
          allowed_vlans:
            - vlan30
          native_vlan: 50
    state: merged

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/3 {
#    description "test interface";
#    speed 1g;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode access;
#            vlan {
#                members v101;
#            }
#        }
#    }
# }
# ge-0/0/4 {
#    description interface-trunk;
#    native-vlan-id 50;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode trunk;
#            vlan {
#                members [ vlan40 vlan30 ];
#            }
#        }
#    }
# }


# Using overridden

# Before state:
# -------------
# ansible@junos01# show interfaces
# ge-0/0/3 {
#    description "test interface";
#    speed 1g;
#}
# ge-0/0/4 {
#    description interface-trunk;
#    native-vlan-id 100;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode trunk;
#            vlan {
#                members [ vlan40 ];
#            }
#        }
#    }
# }
# ge-0/0/5 {
#    description "Configured by Ansible-11";
#    unit 0 {
#        family ethernet-switching {
#            interface-mode access;
#            vlan {
#                members v101;
#            }
#        }
#    }
# }

- name: "Override provided configuration with device configuration"
  junos_l2_interfaces:
    config:
      - name: ge-0/0/3
        access:
          vlan: v101
      - name: ge-0/0/4
        trunk:
          allowed_vlans:
            - vlan30
          native_vlan: 50
    state: overridden

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/3 {
#    unit 0 {
#        family ethernet-switching {
#            interface-mode access;
#            vlan {
#                members v101;
#            }
#        }
#    }
# }
# ge-0/0/4 {
#    description interface-trunk;
#    native-vlan-id 50;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode trunk;
#            vlan {
#                members [ vlan30 ];
#            }
#        }
#    }
# }


# Using replaced

# Before state:
# -------------
# ansible@junos01# show interfaces
# ge-0/0/3 {
#    description "test interface";
#    speed 1g;
#}
# ge-0/0/4 {
#    description interface-trunk;
#    native-vlan-id 100;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode trunk;
#            vlan {
#                members [ vlan40 ];
#            }
#        }
#    }
# }

- name: "Replace provided configuration with device configuration"
  junos_l2_interfaces:
    config:
      - name: ge-0/0/3
        access:
          vlan: v101
      - name: ge-0/0/4
        trunk:
          allowed_vlans:
            - vlan30
          native_vlan: 50
    state: replaced

# After state:
# ------------
# user@junos01# show interfaces
# ge-0/0/3 {
#    unit 0 {
#        family ethernet-switching {
#            interface-mode access;
#            vlan {
#                members v101;
#            }
#        }
#    }
# }
# ge-0/0/4 {
#    description interface-trunk;
#    native-vlan-id 50;
#    unit 0 {
#        family ethernet-switching {
#            interface-mode trunk;
#            vlan {
#                members [ vlan30 ];
#            }
#        }
#    }
# }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]
• This module is maintained by the Ansible Network Team. [network]

Red Hat Support

More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.

Authors

• Ganesh Nalawade (@ganeshrn)