ios_vlans – Manage VLANs on Cisco IOS devices
New in version 2.9.
Synopsis
- This module provides declarative management of VLANs on Cisco IOS network devices.
Parameters
| Parameter | Choices/Defaults | Comments | |
|---|---|---|---|
| config list / elements=dictionary | A dictionary of VLANs options | ||
| mtu integer | VLAN Maximum Transmission Unit. Refer to vendor documentation for valid values. | ||
| name string | Ascii name of the VLAN. NOTE, name should not be named/appended with default as it is reserved for device default vlans. | ||
| remote_span boolean |
| Configure as Remote SPAN VLAN | |
| shutdown string |
| Shutdown VLAN switching. | |
| state string |
| Operational state of the VLAN | |
| vlan_id integer / required | ID of the VLAN. Range 1-4094 | ||
| state string |
| The state of the configuration after module completion | |
Notes
Note
- Tested against Cisco IOSv Version 15.2 on VIRL
- This module works with connection
network_cli. See IOS Platform Options.
Examples
---
# Using merged
# Before state:
# -------------
#
# vios#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
- name: Merge provided configuration with device configuration
ios_vlans:
config:
- name: Vlan_10
vlan_id: 10
state: active
shutdown: disabled
remote_span: 10
- name: Vlan_20
vlan_id: 20
mtu: 610
state: active
shutdown: enabled
- name: Vlan_30
vlan_id: 30
state: suspend
shutdown: enabled
state: merged
# After state:
# ------------
#
# vios#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 vlan_10 active
# 20 vlan_20 act/lshut
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1500 - - - - - 0 0
# 20 enet 100020 610 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10
# Using overridden
# Before state:
# -------------
#
# vios#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 vlan_10 active
# 20 vlan_20 act/lshut
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1500 - - - - - 0 0
# 20 enet 100020 610 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10
- name: Override device configuration of all VLANs with provided configuration
ios_vlans:
config:
- name: Vlan_10
vlan_id: 10
mtu: 1000
state: overridden
# After state:
# ------------
#
# vios#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 10 Vlan_10 active
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 10 enet 100010 1000 - - - - - 0 0
# Using replaced
# Before state:
# -------------
#
# vios#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 vlan_10 active
# 20 vlan_20 act/lshut
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1500 - - - - - 0 0
# 20 enet 100020 610 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10
- name: Replaces device configuration of listed VLANs with provided configuration
ios_vlans:
config:
- vlan_id: 20
name: Test_VLAN20
mtu: 700
shutdown: disabled
- vlan_id: 30
name: Test_VLAN30
mtu: 1000
state: replaced
# After state:
# ------------
#
# vios#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 vlan_10 active
# 20 Test_VLAN20 active
# 30 Test_VLAN30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1500 - - - - - 0 0
# 20 enet 100020 700 - - - - - 0 0
# 30 enet 100030 1000 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10
# Using deleted
# Before state:
# -------------
#
# vios#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 vlan_10 active
# 20 vlan_20 act/lshut
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1500 - - - - - 0 0
# 20 enet 100020 610 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10
- name: Delete attributes of given VLANs
ios_vlans:
config:
- vlan_id: 10
- vlan_id: 20
state: deleted
# After state:
# -------------
#
# vios#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
# Using Deleted without any config passed
#"(NOTE: This will delete all of configured vlans attributes)"
# Before state:
# -------------
#
# vios#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 10 vlan_10 active
# 20 vlan_20 act/lshut
# 30 vlan_30 sus/lshut
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 10 enet 100010 1500 - - - - - 0 0
# 20 enet 100020 610 - - - - - 0 0
# 30 enet 100030 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
#
# Remote SPAN VLANs
# ------------------------------------------------------------------------------
# 10
- name: Delete attributes of ALL VLANs
ios_vlans:
state: deleted
# After state:
# -------------
#
# vios#show vlan
# VLAN Name Status Ports
# ---- -------------------------------- --------- -------------------------------
# 1 default active Gi0/1, Gi0/2
# 1002 fddi-default act/unsup
# 1003 token-ring-default act/unsup
# 1004 fddinet-default act/unsup
# 1005 trnet-default act/unsup
#
# VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
# ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
# 1 enet 100001 1500 - - - - - 0 0
# 1002 fddi 101002 1500 - - - - - 0 0
# 1003 tr 101003 1500 - - - - - 0 0
# 1004 fdnet 101004 1500 - - - ieee - 0 0
# 1005 trnet 101005 1500 - - - ibm - 0 0
Return Values
Common return values are documented here, the following are the fields unique to this module:
| Key | Returned | Description |
|---|---|---|
| after list | when changed | The configuration as structured data after module completion. Sample: The configuration returned will always be in the same format of the parameters above. |
| before list | always | The configuration as structured data prior to module invocation. Sample: The configuration returned will always be in the same format of the parameters above. |
| commands list | always | The set of commands pushed to the remote device. Sample: ['vlan 20', 'name vlan_20', 'mtu 600', 'remote-span'] |
Status
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Network Team. [network]
Red Hat Support
More information about Red Hat’s support of this module is available from this Red Hat Knowledge Base article.
Authors
- Sumit Jaiswal (@justjais)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.
© 2012–2018 Michael DeHaan
© 2018–2019 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.9/modules/ios_vlans_module.html