homebrew_package Resource

Edit this page in the Chef repository

Resources Reference page

Use the homebrew_package resource to manage packages for the macOS platform.

New in Chef Infra Client 12.0.

Syntax

The full syntax for all of the properties that are available to the homebrew_package resource is:

homebrew_package 'name' do
  homebrew_user      String, Integer
  options            String, Array
  package_name       String, Array
  source             String
  timeout            String, Integer
  version            String, Array
  action             Symbol # defaults to :install if not specified
end

where:

• homebrew_package is the resource.
• name is the name given to the resource block.
• action identifies which steps Chef Infra Client will take to bring the node into the desired state.
• homebrew_user, options, package_name, source, timeout, and version are the properties available to this resource.

Actions

The homebrew_package resource has the following actions:

:install

Default. Install a package. If a version is specified, install the specified version of the package.

:nothing

This resource block does not act unless notified by another resource to take action. Once notified, this resource block either runs immediately or is queued up to run at the end of a Chef Infra Client run.

:purge

Purge a package. This action typically removes the configuration files as well as the package.

:remove

Remove a package.

:upgrade

Install a package and/or ensure that a package is the latest version.

Properties

The homebrew_package resource has the following properties:

homebrew_user

Ruby Type: String, Integer

The name or uid of the Homebrew owner to be used by Chef Infra Client when executing a command.

Chef Infra Client, by default, will attempt to execute a Homebrew command as the owner of /usr/local/bin/brew. If that executable does not exist, Chef Infra Client will attempt to find the user by executing which brew. If that executable cannot be found, Chef Infra Client will print an error message: Could not find the "brew" executable in /usr/local/bin or anywhere on the path.. Use the homebrew_user attribute to specify the Homebrew owner for situations where Chef Infra Client cannot automatically detect the correct owner.

options

Ruby Type: String, Array

One (or more) additional command options that are passed to the command.

package_name

Ruby Type: String, Array

An optional property to set the package name if it differs from the resource block’s name.

source

Ruby Type: String

The optional path to a package on the local file system.

timeout

Ruby Type: String, Integer

The amount of time (in seconds) to wait before timing out.

version

Ruby Type: String, Array

The version of a package to be installed or upgraded.

Multiple Packages

A resource may specify multiple packages and/or versions for platforms that use Apt, Chocolatey, DNF, Homebrew, Pacman, or Zypper package managers. Specifying multiple packages and/or versions allows a single transaction to:

• Download the specified packages and versions via a single HTTP transaction
• Update or install multiple packages with a single resource during a Chef Infra Client run

For example, installing multiple packages:

package %w(package1 package2)

Installing multiple packages with versions:

package %w(package1 package2) do
  version [ '1.3.4-2', '4.3.6-1']
end

Upgrading multiple packages:

package %w(package1 package2) do
  action :upgrade
end

Removing multiple packages:

package %w(package1 package2) do
  action :remove
end

Purging multiple packages:

package %w(package1 package2) do
  action :purge
end

Notifications, via an implicit name:

package %w(package1 package2) do
  action :nothing
end

log 'call a notification' do
  notifies :install, 'package[package1, package2]', :immediately
end

Common Resource Functionality

Chef resources include common properties, notifications, and resource guards.

Common Properties

The following properties are common to every resource:

compile_time

Ruby Type: true, false | Default Value: false

Control the phase during which the resource is run on the node. Set to true to run while the resource collection is being built (the compile phase). Set to false to run while Chef Infra Client is configuring the node (the converge phase).

ignore_failure

Ruby Type: true, false, :quiet | Default Value: false

Continue running a recipe if a resource fails for any reason. :quiet will not display the full stack trace and the recipe will continue to run if a resource fails.

retries

Ruby Type: Integer | Default Value: 0

The number of attempts to catch exceptions and retry the resource.

retry_delay

Ruby Type: Integer | Default Value: 2

The retry delay (in seconds).

sensitive

Ruby Type: true, false | Default Value: false

Ensure that sensitive resource data is not logged by Chef InfraClient.

Notifications

notifies

Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may notify another resource to take action when its state changes. Specify a 'resource[name]', the :action that resource should take, and then the :timer for that action. A resource may notify more than one resource; use a notifies statement for each resource to be notified.

If the referenced resource does not exist, an error is raised. In contrast, subscribes will not fail if the source resource is not found.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before

Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.

:delayed

Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.

:immediate, :immediately

Specifies that a notification should be run immediately, per resource notified.

The syntax for notifies is:

notifies :action, 'resource[name]', :timer

subscribes

Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may listen to another resource, and then take action if the state of the resource being listened to changes. Specify a 'resource[name]', the :action to be taken, and then the :timer for that action.

Note that subscribes does not apply the specified action to the resource that it listens to - for example:

file '/etc/nginx/ssl/example.crt' do
  mode '0600'
  owner 'root'
end

service 'nginx' do
  subscribes :reload, 'file[/etc/nginx/ssl/example.crt]', :immediately
end

In this case the subscribes property reloads the nginx service whenever its certificate file, located under /etc/nginx/ssl/example.crt, is updated. subscribes does not make any changes to the certificate file itself, it merely listens for a change to the file, and executes the :reload action for its resource (in this example nginx) when a change is detected.

If the other resource does not exist, the subscription will not raise an error. Contrast this with the stricter semantics of notifies, which will raise an error if the other resource does not exist.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before

Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.

:delayed

Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.

:immediate, :immediately

Specifies that a notification should be run immediately, per resource notified.

The syntax for subscribes is:

subscribes :action, 'resource[name]', :timer

Guards

A guard property can be used to evaluate the state of a node during the execution phase of a Chef Infra Client run. Based on the results of this evaluation, a guard property is then used to tell Chef Infra Client if it should continue executing a resource. A guard property accepts either a string value or a Ruby block value:

• A string is executed as a shell command. If the command returns 0, the guard is applied. If the command returns any other value, then the guard property is not applied. String guards in a powershell_script run Windows PowerShell commands and may return true in addition to 0.
• A block is executed as Ruby code that must return either true or false. If the block returns true, the guard property is applied. If the block returns false, the guard property is not applied.

A guard property is useful for ensuring that a resource is idempotent by allowing that resource to test for the desired state as it is being executed, and then if the desired state is present, for Chef Infra Client to do nothing.

The following properties can be used to define a guard that is evaluated during the execution phase of a Chef Infra Client run:

not_if

Prevent a resource from executing when the condition returns true.

only_if

Allow a resource to execute only if the condition returns true.

Multiple Packages

A resource may specify multiple packages and/or versions for platforms that use Apt, Chocolatey, DNF, Homebrew, Pacman, or Zypper package managers. Specifying multiple packages and/or versions allows a single transaction to:

• Download the specified packages and versions via a single HTTP transaction
• Update or install multiple packages with a single resource during a Chef Infra Client run

For example, installing multiple packages:

package %w(package1 package2)

Installing multiple packages with versions:

package %w(package1 package2) do
  version [ '1.3.4-2', '4.3.6-1']
end

Upgrading multiple packages:

package %w(package1 package2) do
  action :upgrade
end

Removing multiple packages:

package %w(package1 package2) do
  action :remove
end

Purging multiple packages:

package %w(package1 package2) do
  action :purge
end

Notifications, via an implicit name:

package %w(package1 package2) do
  action :nothing
end

log 'call a notification' do
  notifies :install, 'package[package1, package2]', :immediately
end

Examples

The following examples demonstrate various approaches for using the homebrew_package resource in recipes:

Install a package:

homebrew_package 'git'

Install multiple packages at once:

homebrew_package %w(git fish ruby)

Specify the Homebrew user with a UUID

homebrew_package 'git' do
  homebrew_user 1001
end

Specify the Homebrew user with a string:

homebrew_package 'vim' do
  homebrew_user 'user1'
end