os — Miscellaneous operating system interfaces

Source code: Lib/os.py

This module provides a portable way of using operating system dependent functionality. If you just want to read or write a file see open(), if you want to manipulate paths, see the os.path module, and if you want to read all the lines in all the files on the command line see the fileinput module. For creating temporary files and directories see the tempfile module, and for high-level file and directory handling see the shutil module.

Notes on the availability of these functions:

The design of all built-in operating system dependent modules of Python is such that as long as the same functionality is available, it uses the same interface; for example, the function os.stat(path) returns stat information about path in the same format (which happens to have originated with the POSIX interface).
Extensions peculiar to a particular operating system are also available through the os module, but using them is of course a threat to portability.
All functions accepting path or file names accept both bytes and string objects, and result in an object of the same type, if a path or file name is returned.
An “Availability: Unix” note means that this function is commonly found on Unix systems. It does not make any claims about its existence on a specific operating system.
If not separately noted, all functions that claim “Availability: Unix” are supported on Mac OS X, which builds on a Unix core.

Note

All functions in this module raise OSError in the case of invalid or inaccessible file names and paths, or other arguments that have the correct type, but are not accepted by the operating system.

exception os.error: An alias for the built-in OSError exception.

os.name: The name of the operating system dependent module imported. The following names have currently been registered: 'posix', 'nt', 'java'.

See also

sys.platform has a finer granularity. os.uname() gives system-dependent version information.

The platform module provides detailed checks for the system’s identity.

16.1.1. File Names, Command Line Arguments, and Environment Variables

In Python, file names, command line arguments, and environment variables are represented using the string type. On some systems, decoding these strings to and from bytes is necessary before passing them to the operating system. Python uses the file system encoding to perform this conversion (see sys.getfilesystemencoding()).

Changed in version 3.1: On some systems, conversion using the file system encoding may fail. In this case, Python uses the surrogateescape encoding error handler, which means that undecodable bytes are replaced by a Unicode character U+DCxx on decoding, and these are again translated to the original byte on encoding.

The file system encoding must guarantee to successfully decode all bytes below 128. If the file system encoding fails to provide this guarantee, API functions may raise UnicodeErrors.

16.1.2. Process Parameters

These functions and data items provide information and operate on the current process and user.

os.ctermid()

Return the filename corresponding to the controlling terminal of the process.

Availability: Unix.

os.environ

A mapping object representing the string environment. For example, environ['HOME'] is the pathname of your home directory (on some platforms), and is equivalent to getenv("HOME") in C.

This mapping is captured the first time the os module is imported, typically during Python startup as part of processing site.py. Changes to the environment made after this time are not reflected in os.environ, except for changes made by modifying os.environ directly.

If the platform supports the putenv() function, this mapping may be used to modify the environment as well as query the environment. putenv() will be called automatically when the mapping is modified.

On Unix, keys and values use sys.getfilesystemencoding() and 'surrogateescape' error handler. Use environb if you would like to use a different encoding.

Note

Calling putenv() directly does not change os.environ, so it’s better to modify os.environ.

Note

On some platforms, including FreeBSD and Mac OS X, setting environ may cause memory leaks. Refer to the system documentation for putenv().

If putenv() is not provided, a modified copy of this mapping may be passed to the appropriate process-creation functions to cause child processes to use a modified environment.

If the platform supports the unsetenv() function, you can delete items in this mapping to unset environment variables. unsetenv() will be called automatically when an item is deleted from os.environ, and when one of the pop() or clear() methods is called.

os.environb

Bytes version of environ: a mapping object representing the environment as byte strings. environ and environb are synchronized (modify environb updates environ, and vice versa).

environb is only available if supports_bytes_environ is True.

New in version 3.2.

os.chdir(path)
os.fchdir(fd)
os.getcwd(): These functions are described in Files and Directories.

os.fsencode(filename)

Encode path-like filename to the filesystem encoding with 'surrogateescape' error handler, or 'strict' on Windows; return bytes unchanged.

fsdecode() is the reverse function.

New in version 3.2.

Changed in version 3.6: Support added to accept objects implementing the os.PathLike interface.

os.fsdecode(filename)

Decode the path-like filename from the filesystem encoding with 'surrogateescape' error handler, or 'strict' on Windows; return str unchanged.

fsencode() is the reverse function.

New in version 3.2.

Changed in version 3.6: Support added to accept objects implementing the os.PathLike interface.

os.fspath(path)

Return the file system representation of the path.

If str or bytes is passed in, it is returned unchanged. Otherwise __fspath__() is called and its value is returned as long as it is a str or bytes object. In all other cases, TypeError is raised.

New in version 3.6.

class os.PathLike

An abstract base class for objects representing a file system path, e.g. pathlib.PurePath.

New in version 3.6.

abstractmethod __fspath__()

Return the file system path representation of the object.

The method should only return a str or bytes object, with the preference being for str.

os.getenv(key, default=None)

Return the value of the environment variable key if it exists, or default if it doesn’t. key, default and the result are str.

On Unix, keys and values are decoded with sys.getfilesystemencoding() and 'surrogateescape' error handler. Use os.getenvb() if you would like to use a different encoding.

Availability: most flavors of Unix, Windows.

os.getenvb(key, default=None)

Return the value of the environment variable key if it exists, or default if it doesn’t. key, default and the result are bytes.

getenvb() is only available if supports_bytes_environ is True.

Availability: most flavors of Unix.

New in version 3.2.

os.get_exec_path(env=None): Returns the list of directories that will be searched for a named executable, similar to a shell, when launching a process. env, when specified, should be an environment variable dictionary to lookup the PATH in. By default, when env is None, environ is used.

New in version 3.2.

os.getegid()

Return the effective group id of the current process. This corresponds to the “set id” bit on the file being executed in the current process.

Availability: Unix.

os.geteuid()

Return the current process’s effective user id.

Availability: Unix.

os.getgid()

Return the real group id of the current process.

Availability: Unix.

os.getgrouplist(user, group)

Return list of group ids that user belongs to. If group is not in the list, it is included; typically, group is specified as the group ID field from the password record for user.

Availability: Unix.

New in version 3.3.

os.getgroups()

Return list of supplemental group ids associated with the current process.

Availability: Unix.

Note

On Mac OS X, getgroups() behavior differs somewhat from other Unix platforms. If the Python interpreter was built with a deployment target of 10.5 or earlier, getgroups() returns the list of effective group ids associated with the current user process; this list is limited to a system-defined number of entries, typically 16, and may be modified by calls to setgroups() if suitably privileged. If built with a deployment target greater than 10.5, getgroups() returns the current group access list for the user associated with the effective user id of the process; the group access list may change over the lifetime of the process, it is not affected by calls to setgroups(), and its length is not limited to 16. The deployment target value, MACOSX_DEPLOYMENT_TARGET, can be obtained with sysconfig.get_config_var().

os.getlogin()

Return the name of the user logged in on the controlling terminal of the process. For most purposes, it is more useful to use getpass.getuser() since the latter checks the environment variables LOGNAME or USERNAME to find out who the user is, and falls back to pwd.getpwuid(os.getuid())[0] to get the login name of the current real user id.

Availability: Unix, Windows.

os.getpgid(pid)

Return the process group id of the process with process id pid. If pid is 0, the process group id of the current process is returned.

Availability: Unix.

os.getpgrp()

Return the id of the current process group.

Availability: Unix.

os.getpid(): Return the current process id.

os.getppid()

Return the parent’s process id. When the parent process has exited, on Unix the id returned is the one of the init process (1), on Windows it is still the same id, which may be already reused by another process.

Availability: Unix, Windows.

Changed in version 3.2: Added support for Windows.

os.getpriority(which, who)

Get program scheduling priority. The value which is one of PRIO_PROCESS, PRIO_PGRP, or PRIO_USER, and who is interpreted relative to which (a process identifier for PRIO_PROCESS, process group identifier for PRIO_PGRP, and a user ID for PRIO_USER). A zero value for who denotes (respectively) the calling process, the process group of the calling process, or the real user ID of the calling process.

Availability: Unix.

New in version 3.3.

os.PRIO_PROCESS

os.PRIO_PGRP

os.PRIO_USER

Parameters for the getpriority() and setpriority() functions.

Availability: Unix.

New in version 3.3.

os.getresuid()

Return a tuple (ruid, euid, suid) denoting the current process’s real, effective, and saved user ids.

Availability: Unix.

New in version 3.2.

os.getresgid()

Return a tuple (rgid, egid, sgid) denoting the current process’s real, effective, and saved group ids.

Availability: Unix.

New in version 3.2.

os.getuid()

Return the current process’s real user id.

Availability: Unix.

os.initgroups(username, gid)

Call the system initgroups() to initialize the group access list with all of the groups of which the specified username is a member, plus the specified group id.

Availability: Unix.

New in version 3.2.

os.putenv(key, value)

Set the environment variable named key to the string value. Such changes to the environment affect subprocesses started with os.system(), popen() or fork() and execv().

Availability: most flavors of Unix, Windows.

Note

On some platforms, including FreeBSD and Mac OS X, setting environ may cause memory leaks. Refer to the system documentation for putenv.

When putenv() is supported, assignments to items in os.environ are automatically translated into corresponding calls to putenv(); however, calls to putenv() don’t update os.environ, so it is actually preferable to assign to items of os.environ.

os.setegid(egid)

Set the current process’s effective group id.

Availability: Unix.

os.seteuid(euid)

Set the current process’s effective user id.

Availability: Unix.

os.setgid(gid)

Set the current process’ group id.

Availability: Unix.

os.setgroups(groups)

Set the list of supplemental group ids associated with the current process to groups. groups must be a sequence, and each element must be an integer identifying a group. This operation is typically available only to the superuser.

Availability: Unix.

Note

On Mac OS X, the length of groups may not exceed the system-defined maximum number of effective group ids, typically 16. See the documentation for getgroups() for cases where it may not return the same group list set by calling setgroups().

os.setpgrp()

Call the system call setpgrp() or setpgrp(0, 0) depending on which version is implemented (if any). See the Unix manual for the semantics.

Availability: Unix.

os.setpgid(pid, pgrp)

Call the system call setpgid() to set the process group id of the process with id pid to the process group with id pgrp. See the Unix manual for the semantics.

Availability: Unix.

os.setpriority(which, who, priority)

Set program scheduling priority. The value which is one of PRIO_PROCESS, PRIO_PGRP, or PRIO_USER, and who is interpreted relative to which (a process identifier for PRIO_PROCESS, process group identifier for PRIO_PGRP, and a user ID for PRIO_USER). A zero value for who denotes (respectively) the calling process, the process group of the calling process, or the real user ID of the calling process. priority is a value in the range -20 to 19. The default priority is 0; lower priorities cause more favorable scheduling.

Availability: Unix

New in version 3.3.

os.setregid(rgid, egid)

Set the current process’s real and effective group ids.

Availability: Unix.

os.setresgid(rgid, egid, sgid)

Set the current process’s real, effective, and saved group ids.

Availability: Unix.

New in version 3.2.

os.setresuid(ruid, euid, suid)

Set the current process’s real, effective, and saved user ids.

Availability: Unix.

New in version 3.2.

os.setreuid(ruid, euid)

Set the current process’s real and effective user ids.

Availability: Unix.

os.getsid(pid)

Call the system call getsid(). See the Unix manual for the semantics.

Availability: Unix.

os.setsid()

Call the system call setsid(). See the Unix manual for the semantics.

Availability: Unix.

os.setuid(uid)

Set the current process’s user id.

Availability: Unix.

os.strerror(code): Return the error message corresponding to the error code in code. On platforms where strerror() returns NULL when given an unknown error number, ValueError is raised.

os.supports_bytes_environ: True if the native OS type of the environment is bytes (eg. False on Windows).

New in version 3.2.

os.umask(mask): Set the current numeric umask and return the previous umask.

os.uname()

Returns information identifying the current operating system. The return value is an object with five attributes:

sysname - operating system name
nodename - name of machine on network (implementation-defined)
release - operating system release
version - operating system version
machine - hardware identifier

For backwards compatibility, this object is also iterable, behaving like a five-tuple containing sysname, nodename, release, version, and machine in that order.

Some systems truncate nodename to 8 characters or to the leading component; a better way to get the hostname is socket.gethostname() or even socket.gethostbyaddr(socket.gethostname()).

Availability: recent flavors of Unix.

Changed in version 3.3: Return type changed from a tuple to a tuple-like object with named attributes.

os.unsetenv(key)

Unset (delete) the environment variable named key. Such changes to the environment affect subprocesses started with os.system(), popen() or fork() and execv().

When unsetenv() is supported, deletion of items in os.environ is automatically translated into a corresponding call to unsetenv(); however, calls to unsetenv() don’t update os.environ, so it is actually preferable to delete items of os.environ.

Availability: most flavors of Unix, Windows.

16.1.3. File Object Creation

This function creates new file objects. (See also open() for opening file descriptors.)

os.fdopen(fd, *args, **kwargs): Return an open file object connected to the file descriptor fd. This is an alias of the open() built-in function and accepts the same arguments. The only difference is that the first argument of fdopen() must always be an integer.

16.1.4. File Descriptor Operations

These functions operate on I/O streams referenced using file descriptors.

File descriptors are small integers corresponding to a file that has been opened by the current process. For example, standard input is usually file descriptor 0, standard output is 1, and standard error is 2. Further files opened by a process will then be assigned 3, 4, 5, and so forth. The name “file descriptor” is slightly deceptive; on Unix platforms, sockets and pipes are also referenced by file descriptors.

The fileno() method can be used to obtain the file descriptor associated with a file object when required. Note that using the file descriptor directly will bypass the file object methods, ignoring aspects such as internal buffering of data.

os.close(fd): Close file descriptor fd.

Note

This function is intended for low-level I/O and must be applied to a file descriptor as returned by os.open() or pipe(). To close a “file object” returned by the built-in function open() or by popen() or fdopen(), use its close() method.

os.closerange(fd_low, fd_high)

Close all file descriptors from fd_low (inclusive) to fd_high (exclusive), ignoring errors. Equivalent to (but much faster than):

for fd in range(fd_low, fd_high):
    try:
        os.close(fd)
    except OSError:
        pass

os.device_encoding(fd): Return a string describing the encoding of the device associated with fd if it is connected to a terminal; else return None.

os.dup(fd)

Return a duplicate of file descriptor fd. The new file descriptor is non-inheritable.

On Windows, when duplicating a standard stream (0: stdin, 1: stdout, 2: stderr), the new file descriptor is inheritable.

Changed in version 3.4: The new file descriptor is now non-inheritable.

os.dup2(fd, fd2, inheritable=True): Duplicate file descriptor fd to fd2, closing the latter first if necessary. The file descriptor fd2 is inheritable by default, or non-inheritable if inheritable is False.

Changed in version 3.4: Add the optional inheritable parameter.

os.fchmod(fd, mode)

Change the mode of the file given by fd to the numeric mode. See the docs for chmod() for possible values of mode. As of Python 3.3, this is equivalent to os.chmod(fd, mode).

Availability: Unix.

os.fchown(fd, uid, gid)

Change the owner and group id of the file given by fd to the numeric uid and gid. To leave one of the ids unchanged, set it to -1. See chown(). As of Python 3.3, this is equivalent to os.chown(fd, uid, gid).

Availability: Unix.

os.fdatasync(fd)

Force write of file with filedescriptor fd to disk. Does not force update of metadata.

Availability: Unix.

Note

This function is not available on MacOS.

os.fpathconf(fd, name)

Return system configuration information relevant to an open file. name specifies the configuration value to retrieve; it may be a string which is the name of a defined system value; these names are specified in a number of standards (POSIX.1, Unix 95, Unix 98, and others). Some platforms define additional names as well. The names known to the host operating system are given in the pathconf_names dictionary. For configuration variables not included in that mapping, passing an integer for name is also accepted.

If name is a string and is not known, ValueError is raised. If a specific value for name is not supported by the host system, even if it is included in pathconf_names, an OSError is raised with errno.EINVAL for the error number.

As of Python 3.3, this is equivalent to os.pathconf(fd, name).

Availability: Unix.

os.fstat(fd)

Get the status of the file descriptor fd. Return a stat_result object.

As of Python 3.3, this is equivalent to os.stat(fd).

See also

The stat() function.

os.fstatvfs(fd)

Return information about the filesystem containing the file associated with file descriptor fd, like statvfs(). As of Python 3.3, this is equivalent to os.statvfs(fd).

Availability: Unix.

os.fsync(fd)

Force write of file with filedescriptor fd to disk. On Unix, this calls the native fsync() function; on Windows, the MS _commit() function.

If you’re starting with a buffered Python file object f, first do f.flush(), and then do os.fsync(f.fileno()), to ensure that all internal buffers associated with f are written to disk.

Availability: Unix, Windows.

os.ftruncate(fd, length)

Truncate the file corresponding to file descriptor fd, so that it is at most length bytes in size. As of Python 3.3, this is equivalent to os.truncate(fd, length).

Availability: Unix, Windows.

Changed in version 3.5: Added support for Windows

os.get_blocking(fd)

Get the blocking mode of the file descriptor: False if the O_NONBLOCK flag is set, True if the flag is cleared.

Availability: Unix.

New in version 3.5.

os.isatty(fd): Return True if the file descriptor fd is open and connected to a tty(-like) device, else False.

os.lockf(fd, cmd, len)

Apply, test or remove a POSIX lock on an open file descriptor. fd is an open file descriptor. cmd specifies the command to use - one of F_LOCK, F_TLOCK, F_ULOCK or F_TEST. len specifies the section of the file to lock.

Availability: Unix.

New in version 3.3.

os.F_LOCK

os.F_TLOCK

os.F_ULOCK

os.F_TEST

Flags that specify what action lockf() will take.

Availability: Unix.

New in version 3.3.

os.lseek(fd, pos, how): Set the current position of file descriptor fd to position pos, modified by how: SEEK_SET or 0 to set the position relative to the beginning of the file; SEEK_CUR or 1 to set it relative to the current position; SEEK_END or 2 to set it relative to the end of the file. Return the new cursor position in bytes, starting from the beginning.

os.SEEK_SET
os.SEEK_CUR
os.SEEK_END: Parameters to the lseek() function. Their values are 0, 1, and 2, respectively.

New in version 3.3: Some operating systems could support additional values, like os.SEEK_HOLE or os.SEEK_DATA.

os.open(path, flags, mode=0o777, *, dir_fd=None)

Open the file path and set various flags according to flags and possibly its mode according to mode. When computing mode, the current umask value is first masked out. Return the file descriptor for the newly opened file. The new file descriptor is non-inheritable.

For a description of the flag and mode values, see the C run-time documentation; flag constants (like O_RDONLY and O_WRONLY) are defined in the os module. In particular, on Windows adding O_BINARY is needed to open files in binary mode.

This function can support paths relative to directory descriptors with the dir_fd parameter.

Changed in version 3.4: The new file descriptor is now non-inheritable.

Note

This function is intended for low-level I/O. For normal usage, use the built-in function open(), which returns a file object with read() and write() methods (and many more). To wrap a file descriptor in a file object, use fdopen().

New in version 3.3: The dir_fd argument.

Changed in version 3.5: If the system call is interrupted and the signal handler does not raise an exception, the function now retries the system call instead of raising an InterruptedError exception (see PEP 475 for the rationale).

Changed in version 3.6: Accepts a path-like object.

The following constants are options for the flags parameter to the open() function. They can be combined using the bitwise OR operator |. Some of them are not available on all platforms. For descriptions of their availability and use, consult the open(2) manual page on Unix or the MSDN on Windows.

os.O_RDONLY
os.O_WRONLY
os.O_RDWR
os.O_APPEND
os.O_CREAT
os.O_EXCL
os.O_TRUNC: The above constants are available on Unix and Windows.

os.O_DSYNC
os.O_RSYNC
os.O_SYNC
os.O_NDELAY
os.O_NONBLOCK
os.O_NOCTTY
os.O_CLOEXEC: The above constants are only available on Unix.

Changed in version 3.3: Add O_CLOEXEC constant.

os.O_BINARY
os.O_NOINHERIT
os.O_SHORT_LIVED
os.O_TEMPORARY
os.O_RANDOM
os.O_SEQUENTIAL
os.O_TEXT: The above constants are only available on Windows.

os.O_ASYNC
os.O_DIRECT
os.O_DIRECTORY
os.O_NOFOLLOW
os.O_NOATIME
os.O_PATH
os.O_TMPFILE
os.O_SHLOCK
os.O_EXLOCK: The above constants are extensions and not present if they are not defined by the C library.

Changed in version 3.4: Add O_PATH on systems that support it. Add O_TMPFILE, only available on Linux Kernel 3.11 or newer.

os.openpty()

Open a new pseudo-terminal pair. Return a pair of file descriptors (master, slave) for the pty and the tty, respectively. The new file descriptors are non-inheritable. For a (slightly) more portable approach, use the pty module.

Availability: some flavors of Unix.

Changed in version 3.4: The new file descriptors are now non-inheritable.

os.pipe()

Create a pipe. Return a pair of file descriptors (r, w) usable for reading and writing, respectively. The new file descriptor is non-inheritable.

Availability: Unix, Windows.

Changed in version 3.4: The new file descriptors are now non-inheritable.

os.pipe2(flags)

Create a pipe with flags set atomically. flags can be constructed by ORing together one or more of these values: O_NONBLOCK, O_CLOEXEC. Return a pair of file descriptors (r, w) usable for reading and writing, respectively.

Availability: some flavors of Unix.

New in version 3.3.

os.posix_fallocate(fd, offset, len)

Ensures that enough disk space is allocated for the file specified by fd starting from offset and continuing for len bytes.

Availability: Unix.

New in version 3.3.

os.posix_fadvise(fd, offset, len, advice)

Announces an intention to access data in a specific pattern thus allowing the kernel to make optimizations. The advice applies to the region of the file specified by fd starting at offset and continuing for len bytes. advice is one of POSIX_FADV_NORMAL, POSIX_FADV_SEQUENTIAL, POSIX_FADV_RANDOM, POSIX_FADV_NOREUSE, POSIX_FADV_WILLNEED or POSIX_FADV_DONTNEED.

Availability: Unix.

New in version 3.3.

os.POSIX_FADV_NORMAL

os.POSIX_FADV_SEQUENTIAL

os.POSIX_FADV_RANDOM

os.POSIX_FADV_NOREUSE

os.POSIX_FADV_WILLNEED

os.POSIX_FADV_DONTNEED

Flags that can be used in advice in posix_fadvise() that specify the access pattern that is likely to be used.

Availability: Unix.

New in version 3.3.

os.pread(fd, buffersize, offset)

Read from a file descriptor, fd, at a position of offset. It will read up to buffersize number of bytes. The file offset remains unchanged.

Availability: Unix.

New in version 3.3.

os.pwrite(fd, str, offset)

Write bytestring to a file descriptor, fd, from offset, leaving the file offset unchanged.

Availability: Unix.

New in version 3.3.

os.read(fd, n): Read at most n bytes from file descriptor fd. Return a bytestring containing the bytes read. If the end of the file referred to by fd has been reached, an empty bytes object is returned.

Note

This function is intended for low-level I/O and must be applied to a file descriptor as returned by os.open() or pipe(). To read a “file object” returned by the built-in function open() or by popen() or fdopen(), or sys.stdin, use its read() or readline() methods.

Changed in version 3.5: If the system call is interrupted and the signal handler does not raise an exception, the function now retries the system call instead of raising an InterruptedError exception (see PEP 475 for the rationale).

os.sendfile(out, in, offset, count)

os.sendfile(out, in, offset, count, [headers, ][trailers, ]flags=0)

Copy count bytes from file descriptor in to file descriptor out starting at offset. Return the number of bytes sent. When EOF is reached return 0.

The first function notation is supported by all platforms that define sendfile().

On Linux, if offset is given as None, the bytes are read from the current position of in and the position of in is updated.

The second case may be used on Mac OS X and FreeBSD where headers and trailers are arbitrary sequences of buffers that are written before and after the data from in is written. It returns the same as the first case.

On Mac OS X and FreeBSD, a value of 0 for count specifies to send until the end of in is reached.

All platforms support sockets as out file descriptor, and some platforms allow other types (e.g. regular file, pipe) as well.

Cross-platform applications should not use headers, trailers and flags arguments.

Availability: Unix.

Note

For a higher-level wrapper of sendfile(), see socket.socket.sendfile().

New in version 3.3.

os.set_blocking(fd, blocking)

Set the blocking mode of the specified file descriptor. Set the O_NONBLOCK flag if blocking is False, clear the flag otherwise.

Availability: Unix.

New in version 3.5.

os.SF_NODISKIO

os.SF_MNOWAIT

os.SF_SYNC

Parameters to the sendfile() function, if the implementation supports them.

Availability: Unix.

New in version 3.3.

os.readv(fd, buffers)

Read from a file descriptor fd into a number of mutable bytes-like objects buffers. readv() will transfer data into each buffer until it is full and then move on to the next buffer in the sequence to hold the rest of the data. readv() returns the total number of bytes read (which may be less than the total capacity of all the objects).

Availability: Unix.

New in version 3.3.

os.tcgetpgrp(fd)

Return the process group associated with the terminal given by fd (an open file descriptor as returned by os.open()).

Availability: Unix.

os.tcsetpgrp(fd, pg)

Set the process group associated with the terminal given by fd (an open file descriptor as returned by os.open()) to pg.

Availability: Unix.

os.ttyname(fd)

Return a string which specifies the terminal device associated with file descriptor fd. If fd is not associated with a terminal device, an exception is raised.

Availability: Unix.

os.write(fd, str): Write the bytestring in str to file descriptor fd. Return the number of bytes actually written.

Note

This function is intended for low-level I/O and must be applied to a file descriptor as returned by os.open() or pipe(). To write a “file object” returned by the built-in function open() or by popen() or fdopen(), or sys.stdout or sys.stderr, use its write() method.

Changed in version 3.5: If the system call is interrupted and the signal handler does not raise an exception, the function now retries the system call instead of raising an InterruptedError exception (see PEP 475 for the rationale).

os.writev(fd, buffers)

Write the contents of buffers to file descriptor fd. buffers must be a sequence of bytes-like objects. Buffers are processed in array order. Entire contents of first buffer is written before proceeding to second, and so on. The operating system may set a limit (sysconf() value SC_IOV_MAX) on the number of buffers that can be used.

writev() writes the contents of each object to the file descriptor and returns the total number of bytes written.

Availability: Unix.

New in version 3.3.

16.1.4.1. Querying the size of a terminal

New in version 3.3.

os.get_terminal_size(fd=STDOUT_FILENO)

Return the size of the terminal window as (columns, lines), tuple of type terminal_size.

The optional argument fd (default STDOUT_FILENO, or standard output) specifies which file descriptor should be queried.

If the file descriptor is not connected to a terminal, an OSError is raised.

shutil.get_terminal_size() is the high-level function which should normally be used, os.get_terminal_size is the low-level implementation.

Availability: Unix, Windows.

class os.terminal_size

A subclass of tuple, holding (columns, lines) of the terminal window size.

columns: Width of the terminal window in characters.

lines: Height of the terminal window in characters.

16.1.4.2. Inheritance of File Descriptors

New in version 3.4.

A file descriptor has an “inheritable” flag which indicates if the file descriptor can be inherited by child processes. Since Python 3.4, file descriptors created by Python are non-inheritable by default.

On UNIX, non-inheritable file descriptors are closed in child processes at the execution of a new program, other file descriptors are inherited.

On Windows, non-inheritable handles and file descriptors are closed in child processes, except for standard streams (file descriptors 0, 1 and 2: stdin, stdout and stderr), which are always inherited. Using spawn* functions, all inheritable handles and all inheritable file descriptors are inherited. Using the subprocess module, all file descriptors except standard streams are closed, and inheritable handles are only inherited if the close_fds parameter is False.

os.get_inheritable(fd): Get the “inheritable” flag of the specified file descriptor (a boolean).

os.set_inheritable(fd, inheritable): Set the “inheritable” flag of the specified file descriptor.

os.get_handle_inheritable(handle)

Get the “inheritable” flag of the specified handle (a boolean).

Availability: Windows.

os.set_handle_inheritable(handle, inheritable)

Set the “inheritable” flag of the specified handle.

Availability: Windows.

16.1.5. Files and Directories

On some Unix platforms, many of these functions support one or more of these features:

specifying a file descriptor: For some functions, the path argument can be not only a string giving a path name, but also a file descriptor. The function will then operate on the file referred to by the descriptor. (For POSIX systems, Python will call the f... version of the function.)

You can check whether or not path can be specified as a file descriptor on your platform using os.supports_fd. If it is unavailable, using it will raise a NotImplementedError.

If the function also supports dir_fd or follow_symlinks arguments, it is an error to specify one of those when supplying path as a file descriptor.

paths relative to directory descriptors: If dir_fd is not None, it should be a file descriptor referring to a directory, and the path to operate on should be relative; path will then be relative to that directory. If the path is absolute, dir_fd is ignored. (For POSIX systems, Python will call the ...at or f...at version of the function.)

You can check whether or not dir_fd is supported on your platform using os.supports_dir_fd. If it is unavailable, using it will raise a NotImplementedError.

not following symlinks: If follow_symlinks is False, and the last element of the path to operate on is a symbolic link, the function will operate on the symbolic link itself instead of the file the link points to. (For POSIX systems, Python will call the l... version of the function.)

You can check whether or not follow_symlinks is supported on your platform using os.supports_follow_symlinks. If it is unavailable, using it will raise a NotImplementedError.

os.access(path, mode, *, dir_fd=None, effective_ids=False, follow_symlinks=True)

Use the real uid/gid to test for access to path. Note that most operations will use the effective uid/gid, therefore this routine can be used in a suid/sgid environment to test if the invoking user has the specified access to path. mode should be F_OK to test the existence of path, or it can be the inclusive OR of one or more of R_OK, W_OK, and X_OK to test permissions. Return True if access is allowed, False if not. See the Unix man page access(2) for more information.

This function can support specifying paths relative to directory descriptors and not following symlinks.

If effective_ids is True, access() will perform its access checks using the effective uid/gid instead of the real uid/gid. effective_ids may not be supported on your platform; you can check whether or not it is available using os.supports_effective_ids. If it is unavailable, using it will raise a NotImplementedError.

Note

Using access() to check if a user is authorized to e.g. open a file before actually doing so using open() creates a security hole, because the user might exploit the short time interval between checking and opening the file to manipulate it. It’s preferable to use EAFP techniques. For example:

if os.access("myfile", os.R_OK):
    with open("myfile") as fp:
        return fp.read()
return "some default data"

is better written as:

try:
    fp = open("myfile")
except PermissionError:
    return "some default data"
else:
    with fp:
        return fp.read()

Note

I/O operations may fail even when access() indicates that they would succeed, particularly for operations on network filesystems which may have permissions semantics beyond the usual POSIX permission-bit model.

Changed in version 3.3: Added the dir_fd, effective_ids, and follow_symlinks parameters.

Changed in version 3.6: Accepts a path-like object.

os.F_OK
os.R_OK
os.W_OK
os.X_OK: Values to pass as the mode parameter of access() to test the existence, readability, writability and executability of path, respectively.

os.chdir(path)

Change the current working directory to path.

This function can support specifying a file descriptor. The descriptor must refer to an opened directory, not an open file.

New in version 3.3: Added support for specifying path as a file descriptor on some platforms.

Changed in version 3.6: Accepts a path-like object.

os.chflags(path, flags, *, follow_symlinks=True)

Set the flags of path to the numeric flags. flags may take a combination (bitwise OR) of the following values (as defined in the stat module):

This function can support not following symlinks.

Availability: Unix.

New in version 3.3: The follow_symlinks argument.

Changed in version 3.6: Accepts a path-like object.

os.chmod(path, mode, *, dir_fd=None, follow_symlinks=True)

Change the mode of path to the numeric mode. mode may take one of the following values (as defined in the stat module) or bitwise ORed combinations of them:

This function can support specifying a file descriptor, paths relative to directory descriptors and not following symlinks.

Note

Although Windows supports chmod(), you can only set the file’s read-only flag with it (via the stat.S_IWRITE and stat.S_IREAD constants or a corresponding integer value). All other bits are ignored.

New in version 3.3: Added support for specifying path as an open file descriptor, and the dir_fd and follow_symlinks arguments.

Changed in version 3.6: Accepts a path-like object.

os.chown(path, uid, gid, *, dir_fd=None, follow_symlinks=True)

Change the owner and group id of path to the numeric uid and gid. To leave one of the ids unchanged, set it to -1.

This function can support specifying a file descriptor, paths relative to directory descriptors and not following symlinks.

See shutil.chown() for a higher-level function that accepts names in addition to numeric ids.

Availability: Unix.

New in version 3.3: Added support for specifying an open file descriptor for path, and the dir_fd and follow_symlinks arguments.

Changed in version 3.6: Supports a path-like object.

os.chroot(path)

Change the root directory of the current process to path.

Availability: Unix.

Changed in version 3.6: Accepts a path-like object.

os.fchdir(fd)

Change the current working directory to the directory represented by the file descriptor fd. The descriptor must refer to an opened directory, not an open file. As of Python 3.3, this is equivalent to os.chdir(fd).

Availability: Unix.

os.getcwd(): Return a string representing the current working directory.

os.getcwdb(): Return a bytestring representing the current working directory.

os.lchflags(path, flags)

Set the flags of path to the numeric flags, like chflags(), but do not follow symbolic links. As of Python 3.3, this is equivalent to os.chflags(path, flags, follow_symlinks=False).

Availability: Unix.

Changed in version 3.6: Accepts a path-like object.

os.lchmod(path, mode)

Change the mode of path to the numeric mode. If path is a symlink, this affects the symlink rather than the target. See the docs for chmod() for possible values of mode. As of Python 3.3, this is equivalent to os.chmod(path, mode, follow_symlinks=False).

Availability: Unix.

Changed in version 3.6: Accepts a path-like object.

os.lchown(path, uid, gid)

Change the owner and group id of path to the numeric uid and gid. This function will not follow symbolic links. As of Python 3.3, this is equivalent to os.chown(path, uid, gid, follow_symlinks=False).

Availability: Unix.

Changed in version 3.6: Accepts a path-like object.

os.link(src, dst, *, src_dir_fd=None, dst_dir_fd=None, follow_symlinks=True)

Create a hard link pointing to src named dst.

This function can support specifying src_dir_fd and/or dst_dir_fd to supply paths relative to directory descriptors, and not following symlinks.

Availability: Unix, Windows.

Changed in version 3.2: Added Windows support.

New in version 3.3: Added the src_dir_fd, dst_dir_fd, and follow_symlinks arguments.

Changed in version 3.6: Accepts a path-like object for src and dst.

os.listdir(path='.')

Return a list containing the names of the entries in the directory given by path. The list is in arbitrary order, and does not include the special entries '.' and '..' even if they are present in the directory.

path may be a path-like object. If path is of type bytes (directly or indirectly through the PathLike interface), the filenames returned will also be of type bytes; in all other circumstances, they will be of type str.

This function can also support specifying a file descriptor; the file descriptor must refer to a directory.

Note

To encode str filenames to bytes, use fsencode().

See also

The scandir() function returns directory entries along with file attribute information, giving better performance for many common use cases.

Changed in version 3.2: The path parameter became optional.

New in version 3.3: Added support for specifying an open file descriptor for path.

Changed in version 3.6: Accepts a path-like object.

os.lstat(path, *, dir_fd=None)

Perform the equivalent of an lstat() system call on the given path. Similar to stat(), but does not follow symbolic links. Return a stat_result object.

On platforms that do not support symbolic links, this is an alias for stat().

As of Python 3.3, this is equivalent to os.stat(path, dir_fd=dir_fd, follow_symlinks=False).

This function can also support paths relative to directory descriptors.

See also

The stat() function.

Changed in version 3.2: Added support for Windows 6.0 (Vista) symbolic links.

Changed in version 3.3: Added the dir_fd parameter.

Changed in version 3.6: Accepts a path-like object for src and dst.

os.mkdir(path, mode=0o777, *, dir_fd=None)

Create a directory named path with numeric mode mode.

If the directory already exists, FileExistsError is raised.

On some systems, mode is ignored. Where it is used, the current umask value is first masked out. If bits other than the last 9 (i.e. the last 3 digits of the octal representation of the mode) are set, their meaning is platform-dependent. On some platforms, they are ignored and you should call chmod() explicitly to set them.

This function can also support paths relative to directory descriptors.

It is also possible to create temporary directories; see the tempfile module’s tempfile.mkdtemp() function.

New in version 3.3: The dir_fd argument.

Changed in version 3.6: Accepts a path-like object.

os.makedirs(name, mode=0o777, exist_ok=False)

Recursive directory creation function. Like mkdir(), but makes all intermediate-level directories needed to contain the leaf directory.

The mode parameter is passed to mkdir(); see the mkdir() description for how it is interpreted.

If exist_ok is False (the default), an OSError is raised if the target directory already exists.

Note

makedirs() will become confused if the path elements to create include pardir (eg. “..” on UNIX systems).

This function handles UNC paths correctly.

New in version 3.2: The exist_ok parameter.

Changed in version 3.4.1: Before Python 3.4.1, if exist_ok was True and the directory existed, makedirs() would still raise an error if mode did not match the mode of the existing directory. Since this behavior was impossible to implement safely, it was removed in Python 3.4.1. See bpo-21082.

Changed in version 3.6: Accepts a path-like object.

os.mkfifo(path, mode=0o666, *, dir_fd=None)

Create a FIFO (a named pipe) named path with numeric mode mode. The current umask value is first masked out from the mode.

This function can also support paths relative to directory descriptors.

FIFOs are pipes that can be accessed like regular files. FIFOs exist until they are deleted (for example with os.unlink()). Generally, FIFOs are used as rendezvous between “client” and “server” type processes: the server opens the FIFO for reading, and the client opens it for writing. Note that mkfifo() doesn’t open the FIFO — it just creates the rendezvous point.

Availability: Unix.

New in version 3.3: The dir_fd argument.

Changed in version 3.6: Accepts a path-like object.

os.mknod(path, mode=0o600, device=0, *, dir_fd=None)

Create a filesystem node (file, device special file or named pipe) named path. mode specifies both the permissions to use and the type of node to be created, being combined (bitwise OR) with one of stat.S_IFREG, stat.S_IFCHR, stat.S_IFBLK, and stat.S_IFIFO (those constants are available in stat). For stat.S_IFCHR and stat.S_IFBLK, device defines the newly created device special file (probably using os.makedev()), otherwise it is ignored.

This function can also support paths relative to directory descriptors.

Availability: Unix.

New in version 3.3: The dir_fd argument.

Changed in version 3.6: Accepts a path-like object.

os.major(device): Extract the device major number from a raw device number (usually the st_dev or st_rdev field from stat).

os.minor(device): Extract the device minor number from a raw device number (usually the st_dev or st_rdev field from stat).

os.makedev(major, minor): Compose a raw device number from the major and minor device numbers.

os.pathconf(path, name)

Return system configuration information relevant to a named file. name specifies the configuration value to retrieve; it may be a string which is the name of a defined system value; these names are specified in a number of standards (POSIX.1, Unix 95, Unix 98, and others). Some platforms define additional names as well. The names known to the host operating system are given in the pathconf_names dictionary. For configuration variables not included in that mapping, passing an integer for name is also accepted.

This function can support specifying a file descriptor.

Availability: Unix.

Changed in version 3.6: Accepts a path-like object.

os.pathconf_names

Dictionary mapping names accepted by pathconf() and fpathconf() to the integer values defined for those names by the host operating system. This can be used to determine the set of names known to the system.

Availability: Unix.

os.readlink(path, *, dir_fd=None)

Return a string representing the path to which the symbolic link points. The result may be either an absolute or relative pathname; if it is relative, it may be converted to an absolute pathname using os.path.join(os.path.dirname(path), result).

If the path is a string object (directly or indirectly through a PathLike interface), the result will also be a string object, and the call may raise a UnicodeDecodeError. If the path is a bytes object (direct or indirectly), the result will be a bytes object.

This function can also support paths relative to directory descriptors.

Availability: Unix, Windows

Changed in version 3.2: Added support for Windows 6.0 (Vista) symbolic links.

New in version 3.3: The dir_fd argument.

Changed in version 3.6: Accepts a path-like object.

os.remove(path, *, dir_fd=None)

Remove (delete) the file path. If path is a directory, OSError is raised. Use rmdir() to remove directories.

This function can support paths relative to directory descriptors.

On Windows, attempting to remove a file that is in use causes an exception to be raised; on Unix, the directory entry is removed but the storage allocated to the file is not made available until the original file is no longer in use.

This function is semantically identical to unlink().

New in version 3.3: The dir_fd argument.

Changed in version 3.6: Accepts a path-like object.

os.removedirs(name): Remove directories recursively. Works like rmdir() except that, if the leaf directory is successfully removed, removedirs() tries to successively remove every parent directory mentioned in path until an error is raised (which is ignored, because it generally means that a parent directory is not empty). For example, os.removedirs('foo/bar/baz') will first remove the directory 'foo/bar/baz', and then remove 'foo/bar' and 'foo' if they are empty. Raises OSError if the leaf directory could not be successfully removed.

Changed in version 3.6: Accepts a path-like object.

os.rename(src, dst, *, src_dir_fd=None, dst_dir_fd=None)

Rename the file or directory src to dst. If dst is a directory, OSError will be raised. On Unix, if dst exists and is a file, it will be replaced silently if the user has permission. The operation may fail on some Unix flavors if src and dst are on different filesystems. If successful, the renaming will be an atomic operation (this is a POSIX requirement). On Windows, if dst already exists, OSError will be raised even if it is a file.

This function can support specifying src_dir_fd and/or dst_dir_fd to supply paths relative to directory descriptors.

If you want cross-platform overwriting of the destination, use replace().

New in version 3.3: The src_dir_fd and dst_dir_fd arguments.

Changed in version 3.6: Accepts a path-like object for src and dst.

os.renames(old, new): Recursive directory or file renaming function. Works like rename(), except creation of any intermediate directories needed to make the new pathname good is attempted first. After the rename, directories corresponding to rightmost path segments of the old name will be pruned away using removedirs().

Note

This function can fail with the new directory structure made if you lack permissions needed to remove the leaf directory or file.

Changed in version 3.6: Accepts a path-like object for old and new.

os.replace(src, dst, *, src_dir_fd=None, dst_dir_fd=None)

Rename the file or directory src to dst. If dst is a directory, OSError will be raised. If dst exists and is a file, it will be replaced silently if the user has permission. The operation may fail if src and dst are on different filesystems. If successful, the renaming will be an atomic operation (this is a POSIX requirement).

This function can support specifying src_dir_fd and/or dst_dir_fd to supply paths relative to directory descriptors.

New in version 3.3.

Changed in version 3.6: Accepts a path-like object for src and dst.

os.rmdir(path, *, dir_fd=None)

Remove (delete) the directory path. Only works when the directory is empty, otherwise, OSError is raised. In order to remove whole directory trees, shutil.rmtree() can be used.

This function can support paths relative to directory descriptors.

New in version 3.3: The dir_fd parameter.

Changed in version 3.6: Accepts a path-like object.

os.scandir(path='.')

Return an iterator of os.DirEntry objects corresponding to the entries in the directory given by path. The entries are yielded in arbitrary order, and the special entries '.' and '..' are not included.

Using scandir() instead of listdir() can significantly increase the performance of code that also needs file type or file attribute information, because os.DirEntry objects expose this information if the operating system provides it when scanning a directory. All os.DirEntry methods may perform a system call, but is_dir() and is_file() usually only require a system call for symbolic links; os.DirEntry.stat() always requires a system call on Unix but only requires one for symbolic links on Windows.

path may be a path-like object. If path is of type bytes (directly or indirectly through the PathLike interface), the type of the name and path attributes of each os.DirEntry will be bytes; in all other circumstances, they will be of type str.

The scandir() iterator supports the context manager protocol and has the following method:

scandir.close()

Close the iterator and free acquired resources.

This is called automatically when the iterator is exhausted or garbage collected, or when an error happens during iterating. However it is advisable to call it explicitly or use the with statement.

New in version 3.6.

The following example shows a simple use of scandir() to display all the files (excluding directories) in the given path that don’t start with '.'. The entry.is_file() call will generally not make an additional system call:

with os.scandir(path) as it:
    for entry in it:
        if not entry.name.startswith('.') and entry.is_file():
            print(entry.name)

Note

On Unix-based systems, scandir() uses the system’s opendir() and readdir() functions. On Windows, it uses the Win32 FindFirstFileW and FindNextFileW functions.

New in version 3.5.

New in version 3.6: Added support for the context manager protocol and the close() method. If a scandir() iterator is neither exhausted nor explicitly closed a ResourceWarning will be emitted in its destructor.

The function accepts a path-like object.

class os.DirEntry

Object yielded by scandir() to expose the file path and other file attributes of a directory entry.

scandir() will provide as much of this information as possible without making additional system calls. When a stat() or lstat() system call is made, the os.DirEntry object will cache the result.

os.DirEntry instances are not intended to be stored in long-lived data structures; if you know the file metadata has changed or if a long time has elapsed since calling scandir(), call os.stat(entry.path) to fetch up-to-date information.

Because the os.DirEntry methods can make operating system calls, they may also raise OSError. If you need very fine-grained control over errors, you can catch OSError when calling one of the os.DirEntry methods and handle as appropriate.

To be directly usable as a path-like object, os.DirEntry implements the PathLike interface.

Attributes and methods on a os.DirEntry instance are as follows:

name

The entry’s base filename, relative to the scandir() path argument.

The name attribute will be bytes if the scandir() path argument is of type bytes and str otherwise. Use fsdecode() to decode byte filenames.

path

The entry’s full path name: equivalent to os.path.join(scandir_path, entry.name) where scandir_path is the scandir() path argument. The path is only absolute if the scandir() path argument was absolute.

The path attribute will be bytes if the scandir() path argument is of type bytes and str otherwise. Use fsdecode() to decode byte filenames.

inode()

Return the inode number of the entry.

The result is cached on the os.DirEntry object. Use os.stat(entry.path, follow_symlinks=False).st_ino to fetch up-to-date information.

On the first, uncached call, a system call is required on Windows but not on Unix.

is_dir(*, follow_symlinks=True)

Return True if this entry is a directory or a symbolic link pointing to a directory; return False if the entry is or points to any other kind of file, or if it doesn’t exist anymore.

If follow_symlinks is False, return True only if this entry is a directory (without following symlinks); return False if the entry is any other kind of file or if it doesn’t exist anymore.

The result is cached on the os.DirEntry object, with a separate cache for follow_symlinks True and False. Call os.stat() along with stat.S_ISDIR() to fetch up-to-date information.

On the first, uncached call, no system call is required in most cases. Specifically, for non-symlinks, neither Windows or Unix require a system call, except on certain Unix file systems, such as network file systems, that return dirent.d_type == DT_UNKNOWN. If the entry is a symlink, a system call will be required to follow the symlink unless follow_symlinks is False.

This method can raise OSError, such as PermissionError, but FileNotFoundError is caught and not raised.

is_file(*, follow_symlinks=True)

Return True if this entry is a file or a symbolic link pointing to a file; return False if the entry is or points to a directory or other non-file entry, or if it doesn’t exist anymore.

If follow_symlinks is False, return True only if this entry is a file (without following symlinks); return False if the entry is a directory or other non-file entry, or if it doesn’t exist anymore.

The result is cached on the os.DirEntry object. Caching, system calls made, and exceptions raised are as per is_dir().

is_symlink()

Return True if this entry is a symbolic link (even if broken); return False if the entry points to a directory or any kind of file, or if it doesn’t exist anymore.

The result is cached on the os.DirEntry object. Call os.path.islink() to fetch up-to-date information.

On the first, uncached call, no system call is required in most cases. Specifically, neither Windows or Unix require a system call, except on certain Unix file systems, such as network file systems, that return dirent.d_type == DT_UNKNOWN.

This method can raise OSError, such as PermissionError, but FileNotFoundError is caught and not raised.

stat(*, follow_symlinks=True)

Return a stat_result object for this entry. This method follows symbolic links by default; to stat a symbolic link add the follow_symlinks=False argument.

On Unix, this method always requires a system call. On Windows, it only requires a system call if follow_symlinks is True and the entry is a symbolic link.

On Windows, the st_ino, st_dev and st_nlink attributes of the stat_result are always set to zero. Call os.stat() to get these attributes.

The result is cached on the os.DirEntry object, with a separate cache for follow_symlinks True and False. Call os.stat() to fetch up-to-date information.

Note that there is a nice correspondence between several attributes and methods of os.DirEntry and of pathlib.Path. In particular, the name attribute has the same meaning, as do the is_dir(), is_file(), is_symlink() and stat() methods.

New in version 3.5.

Changed in version 3.6: Added support for the PathLike interface. Added support for bytes paths on Windows.

os.stat(path, *, dir_fd=None, follow_symlinks=True)

Get the status of a file or a file descriptor. Perform the equivalent of a stat() system call on the given path. path may be specified as either a string or bytes – directly or indirectly through the PathLike interface – or as an open file descriptor. Return a stat_result object.

This function normally follows symlinks; to stat a symlink add the argument follow_symlinks=False, or use lstat().

This function can support specifying a file descriptor and not following symlinks.

Example:

>>> import os
>>> statinfo = os.stat('somefile.txt')
>>> statinfo
os.stat_result(st_mode=33188, st_ino=7876932, st_dev=234881026,
st_nlink=1, st_uid=501, st_gid=501, st_size=264, st_atime=1297230295,
st_mtime=1297230027, st_ctime=1297230027)
>>> statinfo.st_size
264

See also

fstat() and lstat() functions.

New in version 3.3: Added the dir_fd and follow_symlinks arguments, specifying a file descriptor instead of a path.

Changed in version 3.6: Accepts a path-like object.

class os.stat_result

Object whose attributes correspond roughly to the members of the stat structure. It is used for the result of os.stat(), os.fstat() and os.lstat().

Attributes:

st_mode: File mode: file type and file mode bits (permissions).

st_ino

Platform dependent, but if non-zero, uniquely identifies the file for a given value of st_dev. Typically:

the inode number on Unix,
the file index on Windows

st_dev: Identifier of the device on which this file resides.

st_nlink: Number of hard links.

st_uid: User identifier of the file owner.

st_gid: Group identifier of the file owner.

st_size: Size of the file in bytes, if it is a regular file or a symbolic link. The size of a symbolic link is the length of the pathname it contains, without a terminating null byte.

Timestamps:

st_atime: Time of most recent access expressed in seconds.

st_mtime: Time of most recent content modification expressed in seconds.

st_ctime

Platform dependent:

the time of most recent metadata change on Unix,
the time of creation on Windows, expressed in seconds.

st_atime_ns: Time of most recent access expressed in nanoseconds as an integer.

st_mtime_ns: Time of most recent content modification expressed in nanoseconds as an integer.

st_ctime_ns

Platform dependent:

the time of most recent metadata change on Unix,
the time of creation on Windows, expressed in nanoseconds as an integer.

See also the stat_float_times() function.

Note

The exact meaning and resolution of the st_atime, st_mtime, and st_ctime attributes depend on the operating system and the file system. For example, on Windows systems using the FAT or FAT32 file systems, st_mtime has 2-second resolution, and st_atime has only 1-day resolution. See your operating system documentation for details.

Similarly, although st_atime_ns, st_mtime_ns, and st_ctime_ns are always expressed in nanoseconds, many systems do not provide nanosecond precision. On systems that do provide nanosecond precision, the floating-point object used to store st_atime, st_mtime, and st_ctime cannot preserve all of it, and as such will be slightly inexact. If you need the exact timestamps you should always use st_atime_ns, st_mtime_ns, and st_ctime_ns.

On some Unix systems (such as Linux), the following attributes may also be available:

st_blocks: Number of 512-byte blocks allocated for file. This may be smaller than st_size/512 when the file has holes.

st_blksize: “Preferred” blocksize for efficient file system I/O. Writing to a file in smaller chunks may cause an inefficient read-modify-rewrite.

st_rdev: Type of device if an inode device.

st_flags: User defined flags for file.

On other Unix systems (such as FreeBSD), the following attributes may be available (but may be only filled out if root tries to use them):

st_gen: File generation number.

st_birthtime: Time of file creation.

On Mac OS systems, the following attributes may also be available:

st_rsize: Real size of the file.

st_creator: Creator of the file.

st_type: File type.

On Windows systems, the following attribute is also available:

st_file_attributes: Windows file attributes: dwFileAttributes member of the BY_HANDLE_FILE_INFORMATION structure returned by GetFileInformationByHandle(). See the FILE_ATTRIBUTE_* constants in the stat module.

The standard module stat defines functions and constants that are useful for extracting information from a stat structure. (On Windows, some items are filled with dummy values.)

For backward compatibility, a stat_result instance is also accessible as a tuple of at least 10 integers giving the most important (and portable) members of the stat structure, in the order st_mode, st_ino, st_dev, st_nlink, st_uid, st_gid, st_size, st_atime, st_mtime, st_ctime. More items may be added at the end by some implementations. For compatibility with older Python versions, accessing stat_result as a tuple always returns integers.

New in version 3.3: Added the st_atime_ns, st_mtime_ns, and st_ctime_ns members.

New in version 3.5: Added the st_file_attributes member on Windows.

Changed in version 3.5: Windows now returns the file index as st_ino when available.

os.stat_float_times([newvalue])

Determine whether stat_result represents time stamps as float objects. If newvalue is True, future calls to stat() return floats, if it is False, future calls return ints. If newvalue is omitted, return the current setting.

For compatibility with older Python versions, accessing stat_result as a tuple always returns integers.

Python now returns float values by default. Applications which do not work correctly with floating point time stamps can use this function to restore the old behaviour.

The resolution of the timestamps (that is the smallest possible fraction) depends on the system. Some systems only support second resolution; on these systems, the fraction will always be zero.

It is recommended that this setting is only changed at program startup time in the __main__ module; libraries should never change this setting. If an application uses a library that works incorrectly if floating point time stamps are processed, this application should turn the feature off until the library has been corrected.

Deprecated since version 3.3.

os.statvfs(path)

Perform a statvfs() system call on the given path. The return value is an object whose attributes describe the filesystem on the given path, and correspond to the members of the statvfs structure, namely: f_bsize, f_frsize, f_blocks, f_bfree, f_bavail, f_files, f_ffree, f_favail, f_flag, f_namemax.

Two module-level constants are defined for the f_flag attribute’s bit-flags: if ST_RDONLY is set, the filesystem is mounted read-only, and if ST_NOSUID is set, the semantics of setuid/setgid bits are disabled or not supported.

Additional module-level constants are defined for GNU/glibc based systems. These are ST_NODEV (disallow access to device special files), ST_NOEXEC (disallow program execution), ST_SYNCHRONOUS (writes are synced at once), ST_MANDLOCK (allow mandatory locks on an FS), ST_WRITE (write on file/directory/symlink), ST_APPEND (append-only file), ST_IMMUTABLE (immutable file), ST_NOATIME (do not update access times), ST_NODIRATIME (do not update directory access times), ST_RELATIME (update atime relative to mtime/ctime).

This function can support specifying a file descriptor.

Availability: Unix.

Changed in version 3.2: The ST_RDONLY and ST_NOSUID constants were added.

New in version 3.3: Added support for specifying an open file descriptor for path.

Changed in version 3.4: The ST_NODEV, ST_NOEXEC, ST_SYNCHRONOUS, ST_MANDLOCK, ST_WRITE, ST_APPEND, ST_IMMUTABLE, ST_NOATIME, ST_NODIRATIME, and ST_RELATIME constants were added.

Changed in version 3.6: Accepts a path-like object.

os.supports_dir_fd

A Set object indicating which functions in the os module permit use of their dir_fd parameter. Different platforms provide different functionality, and an option that might work on one might be unsupported on another. For consistency’s sakes, functions that support dir_fd always allow specifying the parameter, but will raise an exception if the functionality is not actually available.

To check whether a particular function permits use of its dir_fd parameter, use the in operator on supports_dir_fd. As an example, this expression determines whether the dir_fd parameter of os.stat() is locally available:

os.stat in os.supports_dir_fd

Currently dir_fd parameters only work on Unix platforms; none of them work on Windows.

New in version 3.3.

os.supports_effective_ids

A Set object indicating which functions in the os module permit use of the effective_ids parameter for os.access(). If the local platform supports it, the collection will contain os.access(), otherwise it will be empty.

To check whether you can use the effective_ids parameter for os.access(), use the in operator on supports_effective_ids, like so:

os.access in os.supports_effective_ids

Currently effective_ids only works on Unix platforms; it does not work on Windows.

New in version 3.3.

os.supports_fd

A Set object indicating which functions in the os module permit specifying their path parameter as an open file descriptor. Different platforms provide different functionality, and an option that might work on one might be unsupported on another. For consistency’s sakes, functions that support fd always allow specifying the parameter, but will raise an exception if the functionality is not actually available.

To check whether a particular function permits specifying an open file descriptor for its path parameter, use the in operator on supports_fd. As an example, this expression determines whether os.chdir() accepts open file descriptors when called on your local platform:

os.chdir in os.supports_fd

New in version 3.3.

os.supports_follow_symlinks

A Set object indicating which functions in the os module permit use of their follow_symlinks parameter. Different platforms provide different functionality, and an option that might work on one might be unsupported on another. For consistency’s sakes, functions that support follow_symlinks always allow specifying the parameter, but will raise an exception if the functionality is not actually available.

To check whether a particular function permits use of its follow_symlinks parameter, use the in operator on supports_follow_symlinks. As an example, this expression determines whether the follow_symlinks parameter of os.stat() is locally available:

os.stat in os.supports_follow_symlinks

New in version 3.3.

os.symlink(src, dst, target_is_directory=False, *, dir_fd=None)

Create a symbolic link pointing to src named dst.

On Windows, a symlink represents either a file or a directory, and does not morph to the target dynamically. If the target is present, the type of the symlink will be created to match. Otherwise, the symlink will be created as a directory if target_is_directory is True or a file symlink (the default) otherwise. On non-Windows platforms, target_is_directory is ignored.

Symbolic link support was introduced in Windows 6.0 (Vista). symlink() will raise a NotImplementedError on Windows versions earlier than 6.0.

This function can support paths relative to directory descriptors.

Note

On Windows, the SeCreateSymbolicLinkPrivilege is required in order to successfully create symlinks. This privilege is not typically granted to regular users but is available to accounts which can escalate privileges to the administrator level. Either obtaining the privilege or running your application as an administrator are ways to successfully create symlinks.

OSError is raised when the function is called by an unprivileged user.

Availability: Unix, Windows.

Changed in version 3.2: Added support for Windows 6.0 (Vista) symbolic links.

New in version 3.3: Added the dir_fd argument, and now allow target_is_directory on non-Windows platforms.

Changed in version 3.6: Accepts a path-like object for src and dst.

os.sync()

Force write of everything to disk.

Availability: Unix.

New in version 3.3.

os.truncate(path, length)

Truncate the file corresponding to path, so that it is at most length bytes in size.

This function can support specifying a file descriptor.

Availability: Unix, Windows.

New in version 3.3.

Changed in version 3.5: Added support for Windows

Changed in version 3.6: Accepts a path-like object.

os.unlink(path, *, dir_fd=None): Remove (delete) the file path. This function is semantically identical to remove(); the unlink name is its traditional Unix name. Please see the documentation for remove() for further information.

New in version 3.3: The dir_fd parameter.

Changed in version 3.6: Accepts a path-like object.

os.utime(path, times=None, *, [ns, ]dir_fd=None, follow_symlinks=True)

Set the access and modified times of the file specified by path.

utime() takes two optional parameters, times and ns. These specify the times set on path and are used as follows:

If ns is specified, it must be a 2-tuple of the form (atime_ns, mtime_ns) where each member is an int expressing nanoseconds.
If times is not None, it must be a 2-tuple of the form (atime, mtime) where each member is an int or float expressing seconds.
If times is None and ns is unspecified, this is equivalent to specifying ns=(atime_ns, mtime_ns) where both times are the current time.

It is an error to specify tuples for both times and ns.

Whether a directory can be given for path depends on whether the operating system implements directories as files (for example, Windows does not). Note that the exact times you set here may not be returned by a subsequent stat() call, depending on the resolution with which your operating system records access and modification times; see stat(). The best way to preserve exact times is to use the st_atime_ns and st_mtime_ns fields from the os.stat() result object with the ns parameter to utime.

This function can support specifying a file descriptor, paths relative to directory descriptors and not following symlinks.

New in version 3.3: Added support for specifying an open file descriptor for path, and the dir_fd, follow_symlinks, and ns parameters.

Changed in version 3.6: Accepts a path-like object.

os.walk(top, topdown=True, onerror=None, followlinks=False)

Generate the file names in a directory tree by walking the tree either top-down or bottom-up. For each directory in the tree rooted at directory top (including top itself), it yields a 3-tuple (dirpath, dirnames, filenames).

dirpath is a string, the path to the directory. dirnames is a list of the names of the subdirectories in dirpath (excluding '.' and '..'). filenames is a list of the names of the non-directory files in dirpath. Note that the names in the lists contain no path components. To get a full path (which begins with top) to a file or directory in dirpath, do os.path.join(dirpath, name).

If optional argument topdown is True or not specified, the triple for a directory is generated before the triples for any of its subdirectories (directories are generated top-down). If topdown is False, the triple for a directory is generated after the triples for all of its subdirectories (directories are generated bottom-up). No matter the value of topdown, the list of subdirectories is retrieved before the tuples for the directory and its subdirectories are generated.

When topdown is True, the caller can modify the dirnames list in-place (perhaps using del or slice assignment), and walk() will only recurse into the subdirectories whose names remain in dirnames; this can be used to prune the search, impose a specific order of visiting, or even to inform walk() about directories the caller creates or renames before it resumes walk() again. Modifying dirnames when topdown is False has no effect on the behavior of the walk, because in bottom-up mode the directories in dirnames are generated before dirpath itself is generated.

By default, errors from the scandir() call are ignored. If optional argument onerror is specified, it should be a function; it will be called with one argument, an OSError instance. It can report the error to continue with the walk, or raise the exception to abort the walk. Note that the filename is available as the filename attribute of the exception object.

By default, walk() will not walk down into symbolic links that resolve to directories. Set followlinks to True to visit directories pointed to by symlinks, on systems that support them.

Note

Be aware that setting followlinks to True can lead to infinite recursion if a link points to a parent directory of itself. walk() does not keep track of the directories it visited already.

Note

If you pass a relative pathname, don’t change the current working directory between resumptions of walk(). walk() never changes the current directory, and assumes that its caller doesn’t either.

This example displays the number of bytes taken by non-directory files in each directory under the starting directory, except that it doesn’t look under any CVS subdirectory:

import os
from os.path import join, getsize
for root, dirs, files in os.walk('python/Lib/email'):
    print(root, "consumes", end=" ")
    print(sum(getsize(join(root, name)) for name in files), end=" ")
    print("bytes in", len(files), "non-directory files")
    if 'CVS' in dirs:
        dirs.remove('CVS')  # don't visit CVS directories

In the next example (simple implementation of shutil.rmtree()), walking the tree bottom-up is essential, rmdir() doesn’t allow deleting a directory before the directory is empty:

# Delete everything reachable from the directory named in "top",
# assuming there are no symbolic links.
# CAUTION:  This is dangerous!  For example, if top == '/', it
# could delete all your disk files.
import os
for root, dirs, files in os.walk(top, topdown=False):
    for name in files:
        os.remove(os.path.join(root, name))
    for name in dirs:
        os.rmdir(os.path.join(root, name))

Changed in version 3.5: This function now calls os.scandir() instead of os.listdir(), making it faster by reducing the number of calls to os.stat().

Changed in version 3.6: Accepts a path-like object.

os.fwalk(top='.', topdown=True, onerror=None, *, follow_symlinks=False, dir_fd=None)

This behaves exactly like walk(), except that it yields a 4-tuple (dirpath, dirnames, filenames, dirfd), and it supports dir_fd.

dirpath, dirnames and filenames are identical to walk() output, and dirfd is a file descriptor referring to the directory dirpath.

This function always supports paths relative to directory descriptors and not following symlinks. Note however that, unlike other functions, the fwalk() default value for follow_symlinks is False.

Note

Since fwalk() yields file descriptors, those are only valid until the next iteration step, so you should duplicate them (e.g. with dup()) if you want to keep them longer.

This example displays the number of bytes taken by non-directory files in each directory under the starting directory, except that it doesn’t look under any CVS subdirectory:

import os
for root, dirs, files, rootfd in os.fwalk('python/Lib/email'):
    print(root, "consumes", end="")
    print(sum([os.stat(name, dir_fd=rootfd).st_size for name in files]),
          end="")
    print("bytes in", len(files), "non-directory files")
    if 'CVS' in dirs:
        dirs.remove('CVS')  # don't visit CVS directories

In the next example, walking the tree bottom-up is essential: rmdir() doesn’t allow deleting a directory before the directory is empty:

# Delete everything reachable from the directory named in "top",
# assuming there are no symbolic links.
# CAUTION:  This is dangerous!  For example, if top == '/', it
# could delete all your disk files.
import os
for root, dirs, files, rootfd in os.fwalk(top, topdown=False):
    for name in files:
        os.unlink(name, dir_fd=rootfd)
    for name in dirs:
        os.rmdir(name, dir_fd=rootfd)

Availability: Unix.

New in version 3.3.

Changed in version 3.6: Accepts a path-like object.

16.1.5.1. Linux extended attributes

New in version 3.3.

These functions are all available on Linux only.

os.getxattr(path, attribute, *, follow_symlinks=True)

Return the value of the extended filesystem attribute attribute for path. attribute can be bytes or str (directly or indirectly through the PathLike interface). If it is str, it is encoded with the filesystem encoding.

This function can support specifying a file descriptor and not following symlinks.

Changed in version 3.6: Accepts a path-like object for path and attribute.

os.listxattr(path=None, *, follow_symlinks=True)

Return a list of the extended filesystem attributes on path. The attributes in the list are represented as strings decoded with the filesystem encoding. If path is None, listxattr() will examine the current directory.

This function can support specifying a file descriptor and not following symlinks.

Changed in version 3.6: Accepts a path-like object.

os.removexattr(path, attribute, *, follow_symlinks=True)

Removes the extended filesystem attribute attribute from path. attribute should be bytes or str (directly or indirectly through the PathLike interface). If it is a string, it is encoded with the filesystem encoding.

This function can support specifying a file descriptor and not following symlinks.

Changed in version 3.6: Accepts a path-like object for path and attribute.

os.setxattr(path, attribute, value, flags=0, *, follow_symlinks=True)

Set the extended filesystem attribute attribute on path to value. attribute must be a bytes or str with no embedded NULs (directly or indirectly through the PathLike interface). If it is a str, it is encoded with the filesystem encoding. flags may be XATTR_REPLACE or XATTR_CREATE. If XATTR_REPLACE is given and the attribute does not exist, EEXISTS will be raised. If XATTR_CREATE is given and the attribute already exists, the attribute will not be created and ENODATA will be raised.

This function can support specifying a file descriptor and not following symlinks.

Note

A bug in Linux kernel versions less than 2.6.39 caused the flags argument to be ignored on some filesystems.

Changed in version 3.6: Accepts a path-like object for path and attribute.

os.XATTR_SIZE_MAX: The maximum size the value of an extended attribute can be. Currently, this is 64 KiB on Linux.

os.XATTR_CREATE: This is a possible value for the flags argument in setxattr(). It indicates the operation must create an attribute.

os.XATTR_REPLACE: This is a possible value for the flags argument in setxattr(). It indicates the operation must replace an existing attribute.

16.1.6. Process Management

These functions may be used to create and manage processes.

The various exec* functions take a list of arguments for the new program loaded into the process. In each case, the first of these arguments is passed to the new program as its own name rather than as an argument a user may have typed on a command line. For the C programmer, this is the argv[0] passed to a program’s main(). For example, os.execv('/bin/echo', ['foo', 'bar']) will only print bar on standard output; foo will seem to be ignored.

os.abort(): Generate a SIGABRT signal to the current process. On Unix, the default behavior is to produce a core dump; on Windows, the process immediately returns an exit code of 3. Be aware that calling this function will not call the Python signal handler registered for SIGABRT with signal.signal().

os.execl(path, arg0, arg1, ...)

os.execle(path, arg0, arg1, ..., env)

os.execlp(file, arg0, arg1, ...)

os.execlpe(file, arg0, arg1, ..., env)

os.execv(path, args)

os.execve(path, args, env)

os.execvp(file, args)

os.execvpe(file, args, env)

These functions all execute a new program, replacing the current process; they do not return. On Unix, the new executable is loaded into the current process, and will have the same process id as the caller. Errors will be reported as OSError exceptions.

The current process is replaced immediately. Open file objects and descriptors are not flushed, so if there may be data buffered on these open files, you should flush them using sys.stdout.flush() or os.fsync() before calling an exec* function.

The “l” and “v” variants of the exec* functions differ in how command-line arguments are passed. The “l” variants are perhaps the easiest to work with if the number of parameters is fixed when the code is written; the individual parameters simply become additional parameters to the execl*() functions. The “v” variants are good when the number of parameters is variable, with the arguments being passed in a list or tuple as the args parameter. In either case, the arguments to the child process should start with the name of the command being run, but this is not enforced.

The variants which include a “p” near the end (execlp(), execlpe(), execvp(), and execvpe()) will use the PATH environment variable to locate the program file. When the environment is being replaced (using one of the exec*e variants, discussed in the next paragraph), the new environment is used as the source of the PATH variable. The other variants, execl(), execle(), execv(), and execve(), will not use the PATH variable to locate the executable; path must contain an appropriate absolute or relative path.

For execle(), execlpe(), execve(), and execvpe() (note that these all end in “e”), the env parameter must be a mapping which is used to define the environment variables for the new process (these are used instead of the current process’ environment); the functions execl(), execlp(), execv(), and execvp() all cause the new process to inherit the environment of the current process.

For execve() on some platforms, path may also be specified as an open file descriptor. This functionality may not be supported on your platform; you can check whether or not it is available using os.supports_fd. If it is unavailable, using it will raise a NotImplementedError.

Availability: Unix, Windows.

New in version 3.3: Added support for specifying an open file descriptor for path for execve().

Changed in version 3.6: Accepts a path-like object.

os._exit(n): Exit the process with status n, without calling cleanup handlers, flushing stdio buffers, etc.

Note

The standard way to exit is sys.exit(n). _exit() should normally only be used in the child process after a fork().

The following exit codes are defined and can be used with _exit(), although they are not required. These are typically used for system programs written in Python, such as a mail server’s external command delivery program.

Note

Some of these may not be available on all Unix platforms, since there is some variation. These constants are defined where they are defined by the underlying platform.

os.EX_OK

Exit code that means no error occurred.

Availability: Unix.

os.EX_USAGE

Exit code that means the command was used incorrectly, such as when the wrong number of arguments are given.

Availability: Unix.

os.EX_DATAERR

Exit code that means the input data was incorrect.

Availability: Unix.

os.EX_NOINPUT

Exit code that means an input file did not exist or was not readable.

Availability: Unix.

os.EX_NOUSER

Exit code that means a specified user did not exist.

Availability: Unix.

os.EX_NOHOST

Exit code that means a specified host did not exist.

Availability: Unix.

os.EX_UNAVAILABLE

Exit code that means that a required service is unavailable.

Availability: Unix.

os.EX_SOFTWARE

Exit code that means an internal software error was detected.

Availability: Unix.

os.EX_OSERR

Exit code that means an operating system error was detected, such as the inability to fork or create a pipe.

Availability: Unix.

os.EX_OSFILE

Exit code that means some system file did not exist, could not be opened, or had some other kind of error.

Availability: Unix.

os.EX_CANTCREAT

Exit code that means a user specified output file could not be created.

Availability: Unix.

os.EX_IOERR

Exit code that means that an error occurred while doing I/O on some file.

Availability: Unix.

os.EX_TEMPFAIL

Exit code that means a temporary failure occurred. This indicates something that may not really be an error, such as a network connection that couldn’t be made during a retryable operation.

Availability: Unix.

os.EX_PROTOCOL

Exit code that means that a protocol exchange was illegal, invalid, or not understood.

Availability: Unix.

os.EX_NOPERM

Exit code that means that there were insufficient permissions to perform the operation (but not intended for file system problems).

Availability: Unix.

os.EX_CONFIG

Exit code that means that some kind of configuration error occurred.

Availability: Unix.

os.EX_NOTFOUND

Exit code that means something like “an entry was not found”.

Availability: Unix.

os.fork()

Fork a child process. Return 0 in the child and the child’s process id in the parent. If an error occurs OSError is raised.

Note that some platforms including FreeBSD <= 6.3 and Cygwin have known issues when using fork() from a thread.

Warning

See ssl for applications that use the SSL module with fork().

Availability: Unix.

os.forkpty()

Fork a child process, using a new pseudo-terminal as the child’s controlling terminal. Return a pair of (pid, fd), where pid is 0 in the child, the new child’s process id in the parent, and fd is the file descriptor of the master end of the pseudo-terminal. For a more portable approach, use the pty module. If an error occurs OSError is raised.

Availability: some flavors of Unix.

os.kill(pid, sig)

Send signal sig to the process pid. Constants for the specific signals available on the host platform are defined in the signal module.

Windows: The signal.CTRL_C_EVENT and signal.CTRL_BREAK_EVENT signals are special signals which can only be sent to console processes which share a common console window, e.g., some subprocesses. Any other value for sig will cause the process to be unconditionally killed by the TerminateProcess API, and the exit code will be set to sig. The Windows version of kill() additionally takes process handles to be killed.

16.1.7. Interface to the scheduler

These functions control how a process is allocated CPU time by the operating system. They are only available on some Unix platforms. For more detailed information, consult your Unix manpages.

New in version 3.3.

The following scheduling policies are exposed if they are supported by the operating system.

os.SCHED_OTHER: The default scheduling policy.

os.SCHED_BATCH: Scheduling policy for CPU-intensive processes that tries to preserve interactivity on the rest of the computer.

os.SCHED_IDLE: Scheduling policy for extremely low priority background tasks.

os.SCHED_SPORADIC: Scheduling policy for sporadic server programs.

os.SCHED_FIFO: A First In First Out scheduling policy.

os.SCHED_RR: A round-robin scheduling policy.

os.SCHED_RESET_ON_FORK: This flag can be OR’ed with any other scheduling policy. When a process with this flag set forks, its child’s scheduling policy and priority are reset to the default.

class os.sched_param(sched_priority)

This class represents tunable scheduling parameters used in sched_setparam(), sched_setscheduler(), and sched_getparam(). It is immutable.

At the moment, there is only one possible parameter:

sched_priority: The scheduling priority for a scheduling policy.

os.sched_get_priority_min(policy): Get the minimum priority value for policy. policy is one of the scheduling policy constants above.

os.sched_get_priority_max(policy): Get the maximum priority value for policy. policy is one of the scheduling policy constants above.

os.sched_setscheduler(pid, policy, param): Set the scheduling policy for the process with PID pid. A pid of 0 means the calling process. policy is one of the scheduling policy constants above. param is a sched_param instance.

os.sched_getscheduler(pid): Return the scheduling policy for the process with PID pid. A pid of 0 means the calling process. The result is one of the scheduling policy constants above.

os.sched_setparam(pid, param): Set a scheduling parameters for the process with PID pid. A pid of 0 means the calling process. param is a sched_param instance.

os.sched_getparam(pid): Return the scheduling parameters as a sched_param instance for the process with PID pid. A pid of 0 means the calling process.

os.sched_rr_get_interval(pid): Return the round-robin quantum in seconds for the process with PID pid. A pid of 0 means the calling process.

os.sched_yield(): Voluntarily relinquish the CPU.

os.sched_setaffinity(pid, mask): Restrict the process with PID pid (or the current process if zero) to a set of CPUs. mask is an iterable of integers representing the set of CPUs to which the process should be restricted.

os.sched_getaffinity(pid): Return the set of CPUs the process with PID pid (or the current process if zero) is restricted to.

16.1.8. Miscellaneous System Information

os.confstr(name)

Return string-valued system configuration values. name specifies the configuration value to retrieve; it may be a string which is the name of a defined system value; these names are specified in a number of standards (POSIX, Unix 95, Unix 98, and others). Some platforms define additional names as well. The names known to the host operating system are given as the keys of the confstr_names dictionary. For configuration variables not included in that mapping, passing an integer for name is also accepted.

If the configuration value specified by name isn’t defined, None is returned.

If name is a string and is not known, ValueError is raised. If a specific value for name is not supported by the host system, even if it is included in confstr_names, an OSError is raised with errno.EINVAL for the error number.

Availability: Unix.

os.confstr_names

Dictionary mapping names accepted by confstr() to the integer values defined for those names by the host operating system. This can be used to determine the set of names known to the system.

Availability: Unix.

os.cpu_count()

Return the number of CPUs in the system. Returns None if undetermined.

This number is not equivalent to the number of CPUs the current process can use. The number of usable CPUs can be obtained with len(os.sched_getaffinity(0))

New in version 3.4.

os.getloadavg()

Return the number of processes in the system run queue averaged over the last 1, 5, and 15 minutes or raises OSError if the load average was unobtainable.

Availability: Unix.

os.sysconf(name)

Return integer-valued system configuration values. If the configuration value specified by name isn’t defined, -1 is returned. The comments regarding the name parameter for confstr() apply here as well; the dictionary that provides information on the known names is given by sysconf_names.

Availability: Unix.

os.sysconf_names

Dictionary mapping names accepted by sysconf() to the integer values defined for those names by the host operating system. This can be used to determine the set of names known to the system.

Availability: Unix.

The following data values are used to support path manipulation operations. These are defined for all platforms.

Higher-level operations on pathnames are defined in the os.path module.

os.curdir: The constant string used by the operating system to refer to the current directory. This is '.' for Windows and POSIX. Also available via os.path.

os.pardir: The constant string used by the operating system to refer to the parent directory. This is '..' for Windows and POSIX. Also available via os.path.

os.sep: The character used by the operating system to separate pathname components. This is '/' for POSIX and '\\' for Windows. Note that knowing this is not sufficient to be able to parse or concatenate pathnames — use os.path.split() and os.path.join() — but it is occasionally useful. Also available via os.path.

os.altsep: An alternative character used by the operating system to separate pathname components, or None if only one separator character exists. This is set to '/' on Windows systems where sep is a backslash. Also available via os.path.

os.extsep: The character which separates the base filename from the extension; for example, the '.' in os.py. Also available via os.path.

os.pathsep: The character conventionally used by the operating system to separate search path components (as in PATH), such as ':' for POSIX or ';' for Windows. Also available via os.path.

os.defpath: The default search path used by exec*p* and spawn*p* if the environment doesn’t have a 'PATH' key. Also available via os.path.

os.linesep: The string used to separate (or, rather, terminate) lines on the current platform. This may be a single character, such as '\n' for POSIX, or multiple characters, for example, '\r\n' for Windows. Do not use os.linesep as a line terminator when writing files opened in text mode (the default); use a single '\n' instead, on all platforms.

os.devnull: The file path of the null device. For example: '/dev/null' for POSIX, 'nul' for Windows. Also available via os.path.

os.RTLD_LAZY
os.RTLD_NOW
os.RTLD_GLOBAL
os.RTLD_LOCAL
os.RTLD_NODELETE
os.RTLD_NOLOAD
os.RTLD_DEEPBIND: Flags for use with the setdlopenflags() and getdlopenflags() functions. See the Unix manual page dlopen(3) for what the different flags mean.

New in version 3.3.

16.1.9. Random numbers

os.getrandom(size, flags=0)

Get up to size random bytes. The function can return less bytes than requested.

These bytes can be used to seed user-space random number generators or for cryptographic purposes.

getrandom() relies on entropy gathered from device drivers and other sources of environmental noise. Unnecessarily reading large quantities of data will have a negative impact on other users of the /dev/random and /dev/urandom devices.

The flags argument is a bit mask that can contain zero or more of the following values ORed together: os.GRND_RANDOM and GRND_NONBLOCK.

See also the Linux getrandom() manual page.

Availability: Linux 3.17 and newer.

New in version 3.6.

os.urandom(size)

Return a string of size random bytes suitable for cryptographic use.

This function returns random bytes from an OS-specific randomness source. The returned data should be unpredictable enough for cryptographic applications, though its exact quality depends on the OS implementation.

On Linux, if the getrandom() syscall is available, it is used in blocking mode: block until the system urandom entropy pool is initialized (128 bits of entropy are collected by the kernel). See the PEP 524 for the rationale. On Linux, the getrandom() function can be used to get random bytes in non-blocking mode (using the GRND_NONBLOCK flag) or to poll until the system urandom entropy pool is initialized.

On a Unix-like system, random bytes are read from the /dev/urandom device. If the /dev/urandom device is not available or not readable, the NotImplementedError exception is raised.

On Windows, it will use CryptGenRandom().

See also

The secrets module provides higher level functions. For an easy-to-use interface to the random number generator provided by your platform, please see random.SystemRandom.

Changed in version 3.6.0: On Linux, getrandom() is now used in blocking mode to increase the security.

Changed in version 3.5.2: On Linux, if the getrandom() syscall blocks (the urandom entropy pool is not initialized yet), fall back on reading /dev/urandom.

Changed in version 3.5: On Linux 3.17 and newer, the getrandom() syscall is now used when available. On OpenBSD 5.6 and newer, the C getentropy() function is now used. These functions avoid the usage of an internal file descriptor.

os.GRND_NONBLOCK

By default, when reading from /dev/random, getrandom() blocks if no random bytes are available, and when reading from /dev/urandom, it blocks if the entropy pool has not yet been initialized.

If the GRND_NONBLOCK flag is set, then getrandom() does not block in these cases, but instead immediately raises BlockingIOError.

New in version 3.6.

os.GRND_RANDOM: If this bit is set, then random bytes are drawn from the /dev/random pool instead of the /dev/urandom pool.

New in version 3.6.