dellemc.openmanage.idrac_network – Configures the iDRAC network attributes

Note

This plugin is part of the dellemc.openmanage collection (version 3.0.0).

To install it use: ansible-galaxy collection install dellemc.openmanage.

To use it in a playbook, specify: dellemc.openmanage.idrac_network.

New in version 2.1.0: of dellemc.openmanage

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis

This module allows to configure iDRAC network settings.

Requirements

The below requirements are needed on the host that executes this module.

omsdk
python >= 2.7.5

Parameters

Parameter	Choices/Defaults	Comments
auto_config string	Choices: Enabled Disabled	Allows to enable or disable auto-provisioning to automatically acquire domain name from DHCP.
auto_detect string	Choices: Enabled Disabled	Allows to auto detect the available NIC types used by iDRAC.
auto_negotiation string	Choices: Enabled Disabled	Allows iDRAC to automatically set the duplex mode and network speed.
dns_from_dhcp string	Choices: Enabled Disabled	Allows to enable DHCP to obtain DNS server address.
dns_idrac_name string		Name of the DNS to register iDRAC.
duplex_mode string	Choices: Full Half	Select the type of data transmission for the NIC.
enable_dhcp string	Choices: Enabled Disabled	Allows to enable or disable Dynamic Host Configuration Protocol (DHCP) in iDRAC.
enable_ipv4 string	Choices: Enabled Disabled	Allows to enable or disable IPv4 configuration.
enable_nic string	Choices: Enabled Disabled	Allows to enable or disable the Network Interface Controller (NIC) used by iDRAC.
failover_network string	Choices: ALL LOM1 LOM2 LOM3 LOM4 T_None	Select one of the remaining LOMs. If a network fails, the traffic is routed through the failover network.
idrac_ip string / required		iDRAC IP Address.
idrac_password string / required		iDRAC user password. aliases: idrac_pwd
idrac_port integer	Default: 443	iDRAC port.
idrac_user string / required		iDRAC username.
ip_address string		Enter a valid iDRAC static IPv4 address.
network_speed string	Choices: T_10 T_100 T_1000	Select the network speed for the selected NIC.
nic_mtu integer		Maximum Transmission Unit of the NIC.
nic_selection string	Choices: Dedicated LOM1 LOM2 LOM3 LOM4	Select one of the available NICs.
register_idrac_on_dns string	Choices: Enabled Disabled	Registers iDRAC on a Domain Name System (DNS).
setup_idrac_nic_vlan string	Choices: Enabled Disabled	Allows to configure VLAN on iDRAC.
share_mnt string		Local mount path of the network share with read-write permission for ansible user. This option is mandatory for network shares.
share_name string / required		Network share or a local path.
share_password string		Network share user password. This option is mandatory for CIFS share. aliases: share_pwd
share_user string		Network share user name. Use the format 'user@domain' or 'domain\\user' if user is part of a domain. This option is mandatory for CIFS share.
static_dns string		Enter the static DNS domain name.
static_dns_1 string		Enter the preferred static DNS server IPv4 address.
static_dns_2 string		Enter the preferred static DNS server IPv4 address.
static_gateway string		Enter the static IPv4 gateway address to iDRAC.
static_net_mask string		Enter the static IP subnet mask to iDRAC.
vlan_id integer		Enter the VLAN ID. The VLAN ID must be a number from 1 through 4094.
vlan_priority integer		Enter the priority for the VLAN ID. The priority value must be a number from 0 through 7.

Notes

Note

Run this module from a system that has direct access to DellEMC iDRAC.
This module supports check_mode.

Examples

---
- name: Configure iDRAC network settings
  dellemc.openmanage.idrac_network:
       idrac_ip:   "192.168.0.1"
       idrac_user: "user_name"
       idrac_password:  "user_password"
       share_name: "192.168.0.1:/share"
       share_password:  "share_pwd"
       share_user: "share_user"
       share_mnt: "/mnt/share"
       register_idrac_on_dns: Enabled
       dns_idrac_name: None
       auto_config: None
       static_dns: None
       setup_idrac_nic_vlan: Enabled
       vlan_id: 0
       vlan_priority: 1
       enable_nic: Enabled
       nic_selection: Dedicated
       failover_network: T_None
       auto_detect: Disabled
       auto_negotiation: Enabled
       network_speed: T_1000
       duplex_mode: Full
       nic_mtu: 1500
       ip_address: "192.168.0.1"
       enable_dhcp: Enabled
       enable_ipv4: Enabled
       static_dns_1: "192.168.0.1"
       static_dns_2: "192.168.0.1"
       dns_from_dhcp: Enabled
       static_gateway: None
       static_net_mask: None

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
error_info dictionary	on HTTP error	Details of the HTTP Error. Sample: {'error': {'@Message.ExtendedInfo': [{'Message': 'Unable to process the request because an error occurred.', 'MessageArgs': [], 'MessageId': 'GEN1234', 'RelatedProperties': [], 'Resolution': 'Retry the operation. If the issue persists, contact your system administrator.', 'Severity': 'Critical'}], 'code': 'Base.1.0.GeneralError', 'message': 'A general error has occurred. See ExtendedInfo for more information.'}}
msg string	always	Successfully configured the idrac network settings. Sample: Successfully configured the idrac network settings.
network_status dictionary	success	Status of the Network settings operation job. Sample: {'@odata.context': '/redfish/v1/$metadata#DellJob.DellJob', '@odata.id': '/redfish/v1/Managers/iDRAC.Embedded.1/Jobs/JID_856418531008', '@odata.type': '#DellJob.v1_0_2.DellJob', 'CompletionTime': '2020-03-31T03:04:15', 'Description': 'Job Instance', 'EndTime': None, 'Id': 'JID_856418531008', 'JobState': 'Completed', 'JobType': 'ImportConfiguration', 'Message': 'Successfully imported and applied Server Configuration Profile.', 'MessageArgs': [], '[email protected]': 0, 'MessageId': 'SYS053', 'Name': 'Import Configuration', 'PercentComplete': 100, 'StartTime': 'TIME_NOW', 'Status': 'Success', 'TargetSettingsURI': None, 'retval': True}

Authors

Felix Stephen (@felixs88)
Anooja Vardhineni (@anooja-vardhineni)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/dellemc/openmanage/idrac_network_module.html