community.network.slxos_l2_interface – Manage Layer-2 interface on Extreme Networks SLX-OS devices.

Note

This plugin is part of the community.network collection (version 2.0.1).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.slxos_l2_interface.

Synopsis

  • This module provides declarative management of Layer-2 interface on Extreme slxos devices.

Parameters

Parameter Choices/Defaults Comments
access_vlan
string
Configure given VLAN in access port. If mode=access, used as the access VLAN ID.
aggregate
string
List of Layer-2 interface definitions.
mode
string
    Choices:
  • access ←
  • trunk
Mode in which interface needs to be configured.
name
string / required
Full name of the interface excluding any logical unit number, i.e. Ethernet 0/1.

aliases: interface
native_vlan
string
Native VLAN to be configured in trunk port. If mode=trunk, used as the trunk native VLAN ID.
state
string
    Choices:
  • present ←
  • absent
  • unconfigured
Manage the state of the Layer-2 Interface configuration.
trunk_allowed_vlans
string
List of allowed VLANs in a given trunk port. If mode=trunk, these are the only VLANs that will be configured on the trunk, i.e. "2-10,15".
trunk_vlans
string
List of VLANs to be configured in trunk port. If mode=trunk, used as the VLAN range to ADD or REMOVE from the trunk.

Examples

- name: Ensure Ethernet 0/5 is in its default l2 interface state
  community.network.slxos_l2_interface:
    name: Ethernet 0/5
    state: unconfigured

- name: Ensure Ethernet 0/5 is configured for access vlan 20
  community.network.slxos_l2_interface:
    name: Ethernet 0/5
    mode: access
    access_vlan: 20

- name: Ensure Ethernet 0/5 only has vlans 5-10 as trunk vlans
  community.network.slxos_l2_interface:
    name: Ethernet 0/5
    mode: trunk
    native_vlan: 10
    trunk_vlans: 5-10

- name: Ensure Ethernet 0/5 is a trunk port and ensure 2-50 are being tagged (doesn't mean others aren't also being tagged)
  community.network.slxos_l2_interface:
    name: Ethernet 0/5
    mode: trunk
    native_vlan: 10
    trunk_vlans: 2-50

- name: Ensure these VLANs are not being tagged on the trunk
  community.network.slxos_l2_interface:
    name: Ethernet 0/5
    mode: trunk
    trunk_vlans: 51-4094
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
commands
list / elements=string
always, except for the platforms that use Netconf transport to manage the device.
The list of configuration mode commands to send to the device

Sample:
['interface Ethernet 0/5', 'switchport access vlan 20']


Authors

  • Matthew Stone (@bigmstone)

© 2012–2018 Michael DeHaan
© 2018–2021 Red Hat, Inc.
Licensed under the GNU General Public License version 3.
https://docs.ansible.com/ansible/2.11/collections/community/network/slxos_l2_interface_module.html