Trait scala.collection.immutable.SortedSet

Creates a new set with a given element removed from this set.

Creates a new set with an additional element, unless the element is already present.

Iterator can be used only once

Creates an iterator that contains all values from this collection greater than or equal to start according to the ordering of this collection. x.iteratorFrom(y) is equivalent to but will usually be more efficient than x.from(y).iterator

Creates a ranged projection of this collection. Any mutations in the ranged projection will update this collection and vice versa.

Note: keys are not guaranteed to be consistent between this collection and the projection. This is the case for buffers where indexing is relative to the projection.

Test two objects for inequality.

Equivalent to x.hashCode except for boxed numeric types and null. For numerics, it returns a hash value which is consistent with value equality: if two value type instances compare as true, then ## will produce the same hash value for each of them. For null returns a hashcode where null.hashCode throws a NullPointerException.

Alias for intersect

Alias for diff

Alias for incl

Alias for concat

Alias for concat

Alias for excl

Alias for removedAll

The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).

Appends all elements of this collection to a string builder. The written text consists of the string representations (w.r.t. the method toString) of all elements of this collection without any separator string.

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> val h = a.addString(b)
h: StringBuilder = 1234

Appends all elements of this collection to a string builder using a separator string. The written text consists of the string representations (w.r.t. the method toString) of all elements of this collection, separated by the string sep.

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> a.addString(b, ", ")
res0: StringBuilder = 1, 2, 3, 4

Appends all elements of this collection to a string builder using start, end, and separator strings. The written text begins with the string start and ends with the string end. Inside, the string representations (w.r.t. the method toString) of all elements of this collection are separated by the string sep.

Example:

scala> val a = List(1,2,3,4)
a: List[Int] = List(1, 2, 3, 4)

scala> val b = new StringBuilder()
b: StringBuilder =

scala> a.addString(b , "List(" , ", " , ")")
res5: StringBuilder = List(1, 2, 3, 4)

Composes two instances of Function1 in a new Function1, with this function applied first.

Tests if some element is contained in this set.

This method is equivalent to contains. It allows sets to be interpreted as predicates.

Cast the receiver object to be of type T0.

Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression 1.asInstanceOf[String] will throw a ClassCastException at runtime, while the expression List(1).asInstanceOf[List[String]] will not. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested type.

A method that should be called from every well-designed equals method that is open to be overridden in a subclass. See Programming in Scala, Chapter 28 for discussion and design.

Defines the prefix of this object's toString representation.

It is recommended to return the name of the concrete collection type, but not implementation subclasses. For example, for ListMap this method should return "ListMap", not "Map" (the supertype) or "Node" (an implementation subclass).

The default implementation returns "Iterable". It is overridden for the basic collection kinds "Seq", "IndexedSeq", "LinearSeq", "Buffer", "Set", "Map", "SortedSet", "SortedMap" and "View".

Create a copy of the receiver object.

The default implementation of the clone method is platform dependent.

Builds a new sorted collection by applying a partial function to all elements of this set on which the function is defined.

Builds a new iterable collection by applying a partial function to all elements of this iterable collection on which the function is defined.

Finds the first element of the collection for which the given partial function is defined, and applies the partial function to it.

Note: may not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Composes two instances of Function1 in a new Function1, with this function applied last.

Creates a new set by adding all elements contained in another collection to this set, omitting duplicates.

This method takes a collection of elements and adds all elements, omitting duplicates, into set.

Example:

scala> val a = Set(1, 2) concat Set(2, 3)
a: scala.collection.immutable.Set[Int] = Set(1, 2, 3)

Returns a new iterable collection containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the iterable collection is the most specific superclass encompassing the element types of the two operands.

Copy elements to an array, returning the number of elements written.

Fills the given array xs starting at index start with at most len elements of this collection.

Copying will stop once either all the elements of this collection have been copied, or the end of the array is reached, or len elements have been copied.

Copy elements to an array, returning the number of elements written.

Fills the given array xs starting at index start with values of this collection.

Copying will stop once either all the elements of this collection have been copied, or the end of the array is reached.

Copy elements to an array, returning the number of elements written.

Fills the given array xs starting at index start with values of this collection.

Copying will stop once either all the elements of this collection have been copied, or the end of the array is reached.

Tests whether every element of this collection's iterator relates to the corresponding element of another collection by satisfying a test predicate.

Counts the number of elements in the collection which satisfy a predicate.

Computes the difference of this set and another set.

Selects all elements except first n ones.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Selects all elements except last n ones.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Drops longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

The empty iterable of the same type as this iterable

Tests whether the argument (that) is a reference to the receiver object (this).

The eq method implements an equivalence relation on non-null instances of AnyRef, and has three additional properties:

It is consistent: for any non-null instances x and y of type AnyRef, multiple invocations of x.eq(y) consistently returns true or consistently returns false.For any non-null instance x of type AnyRef, x.eq(null) and null.eq(x) returns false. null.eq(null) returns true.

When overriding the equals or hashCode methods, it is important to ensure that their behavior is consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).

The universal equality method defined in AnyRef.

Tests whether a predicate holds for at least one element of this collection.

Note: may not terminate for infinite-sized collections.

Selects all elements of this iterable collection which satisfy a predicate.

Selects all elements of this iterable collection which do not satisfy a predicate.

Called by the garbage collector on the receiver object when there are no more references to the object.

The details of when and if the finalize method is invoked, as well as the interaction between finalize and non-local returns and exceptions, are all platform dependent.

Finds the first element of the collection satisfying a predicate, if any.

Note: may not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Returns the first key of the collection.

Builds a new sorted collection by applying a function to all elements of this set and using the elements of the resulting collections.

Builds a new iterable collection by applying a function to all elements of this iterable collection and using the elements of the resulting collections.

For example:

def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")

The type of the resulting collection is guided by the static type of iterable collection. This might cause unexpected results sometimes. For example:

// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set
def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet)

// lettersOf will return a Set[Char], not a Seq
def lettersOf(words: Seq[String]) = words.toSet flatMap ((word: String) => word.toSeq)

// xs will be an Iterable[Int]
val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2)

// ys will be a Map[Int, Int]
val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)

Converts this iterable collection of traversable collections into a iterable collection formed by the elements of these traversable collections.

The resulting collection's type will be guided by the type of iterable collection. For example:

val xs = List(
           Set(1, 2, 3),
           Set(1, 2, 3)
         ).flatten
// xs == List(1, 2, 3, 1, 2, 3)

val ys = Set(
           List(1, 2, 3),
           List(3, 2, 1)
         ).flatten
// ys == Set(1, 2, 3)

Folds the elements of this collection using the specified associative binary operator. The default implementation in IterableOnce is equivalent to foldLeft but may be overridden for more efficient traversal orders.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Note: will not terminate for infinite-sized collections.

Applies a binary operator to a start value and all elements of this collection, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Applies a binary operator to all elements of this collection and a start value, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Tests whether a predicate holds for all elements of this collection.

Note: may not terminate for infinite-sized collections.

Apply f to each element for its side effects Note: [U] parameter needed to help scalac's type inference.

Returns string formatted according to given format string. Format strings are as for String.format (@see java.lang.String.format).

Defines how to turn a given Iterable[A] into a collection of type C.

This process can be done in a strict way or a non-strict way (ie. without evaluating the elements of the resulting collections). In other words, this methods defines the evaluation model of the collection.

Returns the runtime class representation of the object.

Partitions this iterable collection into a map of iterable collections according to some discriminator function.

Note: Even when applied to a view or a lazy collection it will always force the elements.

Partitions this iterable collection into a map of iterable collections according to a discriminator function key. Each element in a group is transformed into a value of type B using the value function.

It is equivalent to groupBy(key).mapValues(_.map(f)), but more efficient.

case class User(name: String, age: Int)

def namesByAge(users: Seq[User]): Map[Int, Seq[String]] =
  users.groupMap(_.age)(_.name)

Note: Even when applied to a view or a lazy collection it will always force the elements.

Partitions this iterable collection into a map according to a discriminator function key. All the values that have the same discriminator are then transformed by the value function and then reduced into a single value with the reduce function.

It is equivalent to groupBy(key).mapValues(_.map(f).reduce(reduce)), but more efficient.

def occurrences[A](as: Seq[A]): Map[A, Int] =
  as.groupMapReduce(identity)(_ => 1)(_ + _)

Note: Even when applied to a view or a lazy collection it will always force the elements.

Partitions elements in fixed size iterable collections.

The hashCode method for reference types. See hashCode in scala.Any.

Selects the first element of this iterable collection.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Optionally selects the first element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

The initial part of the collection without its last element.

Note: Even when applied to a view or a lazy collection it will always force the elements.

Iterates over the inits of this iterable collection. The first value will be this iterable collection and the final one will be an empty iterable collection, with the intervening values the results of successive applications of init.

Note: Even when applied to a view or a lazy collection it will always force the elements.

Computes the intersection between this set and another set.

Tests whether the collection is empty.

Note: Implementations in subclasses that are not repeatedly traversable must take care not to consume any elements when isEmpty is called.

Test whether the dynamic type of the receiver object is T0.

Note that the result of the test is modulo Scala's erasure semantics. Therefore the expression 1.isInstanceOf[String] will return false, while the expression List(1).isInstanceOf[List[String]] will return true. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the specified type.

Tests whether this iterable collection can be repeatedly traversed. Always true for Iterables and false for Iterators unless overridden.

The companion object of this immutable set, providing various factory methods.

Selects the last element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Returns the last key of the collection.

Optionally selects the last element.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Analogous to zip except that the elements in each collection are not consumed until a strict operation is invoked on the returned LazyZip2 decorator.

Calls to lazyZip can be chained to support higher arities (up to 4) without incurring the expense of constructing and deconstructing intermediary tuples.

val xs = List(1, 2, 3)
val res = (xs lazyZip xs lazyZip xs lazyZip xs).map((a, b, c, d) => a + b + c + d)
// res == List(4, 8, 12)

Builds a new sorted collection by applying a function to all elements of this set.

Builds a new iterable collection by applying a function to all elements of this iterable collection.

Finds the largest element.

Find the largest element less than a given key.

Finds the first element which yields the largest value measured by function f.

Finds the first element which yields the largest value measured by function f.

Finds the largest element.

Finds the smallest element.

Find the smallest element larger than or equal to a given key.

Finds the first element which yields the smallest value measured by function f.

Finds the first element which yields the smallest value measured by function f.

Finds the smallest element.

Displays all elements of this collection in a string.

Delegates to addString, which can be overridden.

Displays all elements of this collection in a string using a separator string.

Delegates to addString, which can be overridden.

Displays all elements of this collection in a string using start, end, and separator strings.

Delegates to addString, which can be overridden.

Equivalent to !(this eq that).

Tests whether the collection is not empty.

Wakes up a single thread that is waiting on the receiver object's monitor.

Wakes up all threads that are waiting on the receiver object's monitor.

A pair of, first, all elements that satisfy predicate p and, second, all elements that do not. Interesting because it splits a collection in two.

The default implementation provided here needs to traverse the collection twice. Strict collections have an overridden version of partition in StrictOptimizedIterableOps, which requires only a single traversal.

Applies a function f to each element of the iterable collection and returns a pair of iterable collections: the first one made of those values returned by f that were wrapped in scala.util.Left, and the second one made of those wrapped in scala.util.Right.

Example:

val xs = Iterable(1, "one", 2, "two", 3, "three") partitionMap {
 case i: Int => Left(i)
 case s: String => Right(s)
}
// xs == (Iterable(1, 2, 3),
//        Iterable(one, two, three))

Multiplies up the elements of this collection.

Creates a ranged projection of this collection with both a lower-bound and an upper-bound.

Creates a ranged projection of this collection with no upper-bound.

Create a range projection of this collection with no lower-bound.

Creates a ranged projection of this collection with no lower-bound.

Reduces the elements of this collection using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Applies a binary operator to all elements of this collection, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Optionally applies a binary operator to all elements of this collection, going left to right.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Reduces the elements of this collection, if any, using the specified associative binary operator.

The order in which operations are performed on elements is unspecified and may be nondeterministic.

Applies a binary operator to all elements of this collection, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Optionally applies a binary operator to all elements of this collection, going right to left.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered or the operator is associative and commutative.

Creates a new immutable set from this immutable set by removing all elements of another collection.

Computes a prefix scan of the elements of the collection.

Note: The neutral element z may be applied more than once.

Produces a iterable collection containing cumulative results of applying the operator going left to right, including the initial value.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.

Note: will not terminate for infinite-sized collections.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Note: Even when applied to a view or a lazy collection it will always force the elements.

Example:

List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)

The size of this collection.

Note: will not terminate for infinite-sized collections.

Compares the size of this iterable collection to the size of another Iterable.

Compares the size of this iterable collection to a test value.

Returns a value class containing operations for comparing the size of this iterable collection to a test value.

These operations are implemented in terms of sizeCompare(Int), and allow the following more readable usages:

this.sizeIs < size     // this.sizeCompare(size) < 0
this.sizeIs <= size    // this.sizeCompare(size) <= 0
this.sizeIs == size    // this.sizeCompare(size) == 0
this.sizeIs != size    // this.sizeCompare(size) != 0
this.sizeIs >= size    // this.sizeCompare(size) >= 0
this.sizeIs > size     // this.sizeCompare(size) > 0

Selects an interval of elements. The returned iterable collection is made up of all elements x which satisfy the invariant:

from <= indexOf(x) < until

Note: might return different results for different runs, unless the underlying collection type is ordered.

Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)

Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.) The "sliding window" step is set to one.

The companion object of this sorted set, providing various factory methods.

Splits this iterable collection into a prefix/suffix pair according to a predicate.

Note: c span p is equivalent to (but possibly more efficient than) (c takeWhile p, c dropWhile p), provided the evaluation of the predicate p does not cause any side-effects.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Splits this iterable collection into a prefix/suffix pair at a given position.

Note: c splitAt n is equivalent to (but possibly more efficient than) (c take n, c drop n).

Note: might return different results for different runs, unless the underlying collection type is ordered.

Returns a Stepper for the elements of this collection.

The Stepper enables creating a Java stream to operate on the collection, see scala.jdk.StreamConverters. For collections holding primitive values, the Stepper can be used as an iterator which doesn't box the elements.

The implicit StepperShape parameter defines the resulting Stepper type according to the element type of this collection.

For collections of Int, Short, Byte or Char, an IntStepper is returnedFor collections of Double or Float, a DoubleStepper is returnedFor collections of Long a LongStepper is returnedFor any other element type, an AnyStepper is returned

Note that this method is overridden in subclasses and the return type is refined to S with EfficientSplit, for example IndexedSeqOps.stepper. For Steppers marked with scala.collection.Stepper.EfficientSplit, the converters in scala.jdk.StreamConverters allow creating parallel streams, whereas bare Steppers can be converted only to sequential streams.

Tests whether this set is a subset of another set.

An iterator over all subsets of this set.

An iterator over all subsets of this set of the given size. If the requested size is impossible, an empty iterator is returned.

Sums up the elements of this collection.

The rest of the collection without its first element.

Iterates over the tails of this iterable collection. The first value will be this iterable collection and the final one will be an empty iterable collection, with the intervening values the results of successive applications of tail.

Selects the first n elements.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Selects the last n elements.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Takes longest prefix of elements that satisfy a predicate.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Applies a side-effecting function to each element in this collection. Strict collections will apply f to their elements immediately, while lazy collections like Views and LazyLists will only apply f on each element if and when that element is evaluated, and each time that element is evaluated.

Given a collection factory factory, convert this collection to the appropriate representation for the current element type A. Example uses:

xs.to(List) xs.to(ArrayBuffer) xs.to(BitSet) // for xs: Iterable[Int]

Convert collection to array.

Creates a String representation of this object. The default representation is platform dependent. On the java platform it is the concatenation of the class name, "@", and the object's hashcode in hexadecimal.

Transposes this iterable collection of iterable collections into a iterable collection of iterable collections.

The resulting collection's type will be guided by the static type of iterable collection. For example:

val xs = List(
           Set(1, 2, 3),
           Set(4, 5, 6)).transpose
// xs == List(
//         List(1, 4),
//         List(2, 5),
//         List(3, 6))

val ys = Vector(
           List(1, 2, 3),
           List(4, 5, 6)).transpose
// ys == Vector(
//         Vector(1, 4),
//         Vector(2, 5),
//         Vector(3, 6))

Note: Even when applied to a view or a lazy collection it will always force the elements.

Computes the union between of set and another set.

Converts this iterable collection of pairs into two collections of the first and second half of each pair.

val xs = Iterable(
           (1, "one"),
           (2, "two"),
           (3, "three")).unzip
// xs == (Iterable(1, 2, 3),
//        Iterable(one, two, three))

Converts this iterable collection of triples into three collections of the first, second, and third element of each triple.

val xs = Iterable(
           (1, "one", '1'),
           (2, "two", '2'),
           (3, "three", '3')).unzip3
// xs == (Iterable(1, 2, 3),
//        Iterable(one, two, three),
//        Iterable(1, 2, 3))

A view over the elements of this collection.

Creates a non-strict filter of this set.

Note: the difference between c filter p and c withFilter p is that the former creates a new collection, whereas the latter only restricts the domain of subsequent map, flatMap, foreach, and withFilter operations.

Note: might return different results for different runs, unless the underlying collection type is ordered.

Returns a set formed from this set and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.

Returns a iterable collection formed from this iterable collection and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.

Returns a iterable collection formed from this iterable collection and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.

Zips this iterable collection with its indices.

Alias for union