Create

create an Observable from scratch by means of a function
Create

You can create an Observable from scratch by using the Create operator. You pass this operator a function that accepts the observer as its parameter. Write this function so that it behaves as an Observable — by calling the observer’s onNext, onError, and onCompleted methods appropriately.

A well-formed finite Observable must attempt to call either the observer’s onCompleted method exactly once or its onError method exactly once, and must not thereafter attempt to call any of the observer’s other methods.

See Also

Language-Specific Information

create

RxGroovy implements this operator as create.

Sample Code

def myObservable = Observable.create({ aSubscriber ->
  try {
    for (int i = 1; i < 1000000; i++) {
      if (aSubscriber.isUnsubscribed()) {
        return;
      }
      aSubscriber.onNext(i);
    }
    if (!aSubscriber.isUnsubscribed()) {
      aSubscriber.onCompleted();
    }
  } catch(Throwable t) {
    if (!aSubscriber.isUnsubscribed()) {
      aSubscriber.onError(t);
    }
  }
})

It is good practice to check the observer’s isUnsubscribed state so that your Observable can stop emitting items or doing expensive calculations when there is no longer an interested observer.

create does not by default operate on any particular Scheduler.

create

RxJava implements this operator as create.

It is good practice to check the observer’s isUnsubscribed state from within the function you pass to create so that your Observable can stop emitting items or doing expensive calculations when there is no longer an interested observer.

Sample Code

Observable.create(new Observable.OnSubscribe<Integer>() {
    @Override
    public void call(Subscriber<? super Integer> observer) {
        try {
            if (!observer.isUnsubscribed()) {
                for (int i = 1; i < 5; i++) {
                    observer.onNext(i);
                }
                observer.onCompleted();
            }
        } catch (Exception e) {
            observer.onError(e);
        }
    }
 } ).subscribe(new Subscriber<Integer>() {
        @Override
        public void onNext(Integer item) {
            System.out.println("Next: " + item);
        }

        @Override
        public void onError(Throwable error) {
            System.err.println("Error: " + error.getMessage());
        }

        @Override
        public void onCompleted() {
            System.out.println("Sequence complete.");
        }
    });
Next: 1
Next: 2
Next: 3
Next: 4
Sequence complete.

create does not by default operate on any particular Scheduler.

create

RxJS implements this operator as create (there is also an alternate name for the same operator: createWithDisposable).

Sample Code

/* Using a function */
var source = Rx.Observable.create(function (observer) {
    observer.onNext(42);
    observer.onCompleted();

    // Note that this is optional, you do not have to return this if you require no cleanup
    return function () { console.log('disposed'); };
});

var subscription = source.subscribe(
    function (x) { console.log('Next: ' + x); },
    function (err) { console.log('Error: ' + err); },
    function () { console.log('Completed'); });
Next: 42
Completed
/* Using a disposable */
var source = Rx.Observable.create(function (observer) {
    observer.onNext(42);
    observer.onCompleted();

    // Note that this is optional, you do not have to return this if you require no cleanup
    return Rx.Disposable.create(function () {
        console.log('disposed');
    });
});

var subscription = source.subscribe(
    function (x) { console.log('Next: ' + x); },
    function (err) { console.log('Error: ' + err); },
    function () { console.log('Completed'); });
Next: 42
Completed

create is found in the following distributions:

  • rx.js
  • rx.all.js
  • rx.all.compat.js
  • rx.compat.js
  • rx.lite.js
  • rx.lite.compat.js
generate

You can use the generate operator to create simple Observables that can generate their next emissions, and can determine when to terminate, based on the value of the previous emission. The basic form of generate takes four parameters:

  1. the first item to emit
  2. a function to test an item to determine whether to emit it (true) or terminate the Observable (false)
  3. a function to generate the next item to test and emit based on the value of the previous item
  4. a function to transform items before emitting them

You can also pass in as an optional fifth parameter a Scheduler that generate will use to create and emit its sequence (it uses currentThread by default).

Sample Code

var source = Rx.Observable.generate(
    0,
    function (x) { return x < 3; },
    function (x) { return x + 1; },
    function (x) { return x; }
);

var subscription = source.subscribe(
    function (x) { console.log('Next: ' + x); },
    function (err) { console.log('Error: ' + err); },
    function () { console.log('Completed'); });
Next: 0
Next: 1
Next: 2
Completed

generate is found in the following distributions:

  • rx.js
  • rx.compat.js
  • rx.lite.js
  • rx.lite.compat.js
generateWithRelativeTime

You can use the generateWithRelativeTime operator to create simple Observables that can generate their next emissions, and can determine when to terminate, based on the value of the previous emission. The basic form of generateWithRelativeTime takes five parameters:

  1. the first item to emit
  2. a function to test an item to determine whether to emit it (true) or terminate the Observable (false)
  3. a function to generate the next item to test and emit based on the value of the previous item
  4. a function to transform items before emitting them
  5. a function to indicate how long, in milliseconds, the generator should wait after the emission of the previous item before emitting this item

You can also pass in as an optional sixth parameter a Scheduler that generate will use to create and emit its sequence (it uses currentThread by default).

Sample Code

var source = Rx.Observable.generateWithRelativeTime(
    1,
    function (x) { return x < 4; },
    function (x) { return x + 1; },
    function (x) { return x; },
    function (x) { return 100 * x; }
).timeInterval();

var subscription = source.subscribe(
    function (x) { console.log('Next: ' + x); },
    function (err) { console.log('Error: ' + err); },
    function () { console.log('Completed'); });
Next: {value: 1, interval: 100}
Next: {value: 2, interval: 200}
Next: {value: 3, interval: 300}
Completed

generateWithRelativeTime is found in the following distributions:

  • rx.lite.js
  • rx.lite.compat.js
  • rx.time.js (requires rx.js or rx.compat.js)
generateWithAbsoluteTime

You can use the generateWithAbsoluteTime operator to create simple Observables that can generate their next emissions, and can determine when to terminate, based on the value of the previous emission. The basic form of generateWithAbsoluteTime takes five parameters:

  1. the first item to emit
  2. a function to test an item to determine whether to emit it (true) or terminate the Observable (false)
  3. a function to generate the next item to test and emit based on the value of the previous item
  4. a function to transform items before emitting them
  5. a function to indicate at what time (expressed as a Date) the generator should emit the the new item

You can also pass in as an optional sixth parameter a Scheduler that generate will use to create and emit its sequence (it uses currentThread by default).

Sample Code

var source = Rx.Observable.generate(
    1,
    function (x) { return x < 4; },
    function (x) { return x + 1; },
    function (x) { return x; },
    function (x) { return Date.now() + (100 * x); }
).timeInterval();

var subscription = source.subscribe(
    function (x) { console.log('Next: ' + x); },
    function (err) { console.log('Error: ' + err); },
    function () { console.log('Completed'); });
Next: {value: 1, interval: 100}
Next: {value: 2, interval: 200}
Next: {value: 3, interval: 300}
Completed

generateWithAbsoluteTime is found in the following distribution:

  • rx.time.js (requires rx.js or rx.compat.js)

RxPHP implements this operator as create.

Creates an observable sequence from a specified subscribeAction callable implementation.

Sample Code

//from https://github.com/ReactiveX/RxPHP/blob/master/demo/create/create.php

//With static method
$source = \Rx\Observable::create(function (\Rx\ObserverInterface $observer) {
    $observer->onNext(42);
    $observer->onCompleted();

    return new CallbackDisposable(function () {
        echo "Disposed\n";
    });
});

$subscription = $source->subscribe($createStdoutObserver());
Next value: 42
Complete!
Disposed
create

RxSwift implements this operator as create.

Sample Code

let source : Observable = Observable.create { observer in
    for i in 1...5 {
        observer.on(.next(i))
    }
    observer.on(.completed)

    // Note that this is optional. If you require no cleanup you can return
    // `Disposables.create()` (which returns the `NopDisposable` singleton)
    return Disposables.create {
        print("disposed")
    }
}

source.subscribe {
    print($0)
}
next(1)
next(2)
next(3)
next(4)
next(5)
completed
disposed
generate

You can use the generate operator to create simple Observables that can generate their next emissions, and can determine when to terminate, based on the value of the previous emission. The basic form of generate takes three parameters:

  1. the first item to emit
  2. a function to test an item to determine whether to emit it (true) or terminate the Observable (false)
  3. a function to generate the next item to test and emit based on the value of the previous item

You can also pass in as an optional fourth parameter a Scheduler that generate will use to create and emit its sequence (it uses CurrentThreadScheduler by default).

Sample Code

let source = Observable.generate(
   initialState: 0,
   condition: { $0 < 3 },
   iterate: { $0 + 1 }
)

source.subscribe {
   print($0)
}
next(0)
next(1)
next(2)
completed

© ReactiveX contributors
Licensed under the Apache License 2.0.
http://reactivex.io/documentation/operators/create.html