2 SASL Error Logging
The SASL error logging concept described in this section is deprecated since Erlang/OTP 21.0, when the new logging API was introduced.
The new default behaviour is that the SASL application no longer affects which log events that are logged. Supervisor reports and crash reports are logged via the default logger handler which is setup by Kernel. Progress reports are by default not logged, but can be enabled by setting the primary log level to info, for example by using the Kernel configuration parameter logger_level.
The old SASL error logging behaviour can be re-enabled by setting the Kernel configuration parameter logger_sasl_compatible to true.
The mechanism for multi-file error report logging as described in this section is also kept for backwards compatibility. However, the new logging API also introduces logger_disk_log_h(3), which is a logger handler that can print to multiple files using disk_log(3).
2.1 SASL reports
The SASL application introduces three types of reports:
- Supervisor report
- Progress report
- Crash report
When the SASL application is started, it adds a Logger handler that formats and writes these reports, as specified in the configuration parameters for SASL.
Supervisor Report
A supervisor report is issued when a supervised child terminates unexpectedly. A supervisor report contains the following items:
SupervisorName of the reporting supervisor.
ContextIndicates in which phase the child terminated from the supervisor's point of view. This can be
start_error,child_terminated, orshutdown_error.ReasonTermination reason.
OffenderStart specification for the child.
Progress Report
A progress report is issued when a supervisor starts or restarts a child. A progress report contains the following items:
SupervisorName of the reporting supervisor.
StartedStart specification for the successfully started child.
Crash Report
Processes started with functions proc_lib:spawn or proc_lib:spawn_link are wrapped within a catch. A crash report is issued when such a process terminates with an unexpected reason, which is any reason other than normal, shutdown, or {shutdown,Term}. Processes using behaviors gen_server, gen_fsm or gen_statem are examples of such processes. A crash report contains the following items:
CrasherInformation about the crashing process, such as initial function call, exit reason, and message queue.
NeighboursInformation about processes that are linked to the crashing process and do not trap exits. These processes are the neighbours that terminate because of this process crash. The information gathered is the same as the information for Crasher, described in the previous item.
Example
The following example shows the reports generated when a process crashes. The example process is a permanent process supervised by the test_sup supervisor. A division by zero is executed and the error is first reported by the faulty process. A crash report is generated, as the process was started using function proc_lib:spawn/3. The supervisor generates a supervisor report showing the crashed process. A progress report is generated when the process is finally restarted.
=ERROR REPORT==== 27-May-1996::13:38:56 ===
<0.63.0>: Divide by zero !
=CRASH REPORT==== 27-May-1996::13:38:56 ===
crasher:
pid: <0.63.0>
registered_name: []
error_info: {badarith,{test,s,[]}}
initial_call: {test,s,[]}
ancestors: [test_sup,<0.46.0>]
messages: []
links: [<0.47.0>]
dictionary: []
trap_exit: false
status: running
heap_size: 128
stack_size: 128
reductions: 348
neighbours:
=SUPERVISOR REPORT==== 27-May-1996::13:38:56 ===
Supervisor: {local,test_sup}
Context: child_terminated
Reason: {badarith,{test,s,[]}}
Offender: [{pid,<0.63.0>},
{name,test},
{mfa,{test,t,[]}},
{restart_type,permanent},
{shutdown,200},
{child_type,worker}]
=PROGRESS REPORT==== 27-May-1996::13:38:56 ===
Supervisor: {local,test_sup}
Started: [{pid,<0.64.0>},
{name,test},
{mfa,{test,t,[]}},
{restart_type,permanent},
{shutdown,200},
{child_type,worker}] 2.2 Multi-File Error Report Logging
Multi-file error report logging is used to store error messages received by error_logger. The error messages are stored in several files and each file is smaller than a specified number of kilobytes. No more than a specified number of files exist at the same time. The logging is very fast, as each error message is written as a binary term.
For more details, see the sasl(6) application in the Reference Manual.
2.3 Report Browser
The report browser is used to browse and format error reports written by the error logger handler log_mf_h defined in STDLIB.
The log_mf_h handler writes all reports to a report logging directory, which is specified when configuring the SASL application.
If the report browser is used offline, the reports can be copied to another directory specified when starting the browser. If no such directory is specified, the browser reads reports from the SASL error_logger_mf_dir.
Starting Report Browser
Start the rb_server with function rb:start([Options]) as shown in the following example:
5> rb:start([{max, 20}]).
rb: reading report...done.
rb: reading report...done.
rb: reading report...done.
rb: reading report...done.
{ok,<0.199.0>} Online Help
Enter command rb:help() to access the report browser online help system.
List Reports in Server
Use function rb:list() to list all loaded reports:
4> rb:list(). No Type Process Date Time == ==== ======= ==== ==== 20 progress <0.17.0> 1996-10-16 16:14:54 19 progress <0.14.0> 1996-10-16 16:14:55 18 error <0.15.0> 1996-10-16 16:15:02 17 progress <0.14.0> 1996-10-16 16:15:06 16 progress <0.38.0> 1996-10-16 16:15:12 15 progress <0.17.0> 1996-10-16 16:16:14 14 progress <0.17.0> 1996-10-16 16:16:14 13 progress <0.17.0> 1996-10-16 16:16:14 12 progress <0.14.0> 1996-10-16 16:16:14 11 error <0.17.0> 1996-10-16 16:16:21 10 error <0.17.0> 1996-10-16 16:16:21 9 crash_report release_handler 1996-10-16 16:16:21 8 supervisor_report <0.17.0> 1996-10-16 16:16:21 7 progress <0.17.0> 1996-10-16 16:16:21 6 progress <0.17.0> 1996-10-16 16:16:36 5 progress <0.17.0> 1996-10-16 16:16:36 4 progress <0.17.0> 1996-10-16 16:16:36 3 progress <0.14.0> 1996-10-16 16:16:36 2 error <0.15.0> 1996-10-16 16:17:04 1 progress <0.14.0> 1996-10-16 16:17:09 ok
Show Reports
Use function rb:show(Number) to show details of a specific report:
7> rb:show(4).
PROGRESS REPORT <0.20.0> 1996-10-16 16:16:36
===============================================================================
supervisor {local,sasl_sup}
started
[{pid,<0.24.0>},
{name,release_handler},
{mfa,{release_handler,start_link,[]}},
{restart_type,permanent},
{shutdown,2000},
{child_type,worker}]
ok
8> rb:show(9).
CRASH REPORT <0.24.0> 1996-10-16 16:16:21
===============================================================================
Crashing process
pid <0.24.0>
registered_name release_handler
error_info {undef,{release_handler,mbj_func,[]}}
initial_call
{gen,init_it,
[gen_server,
<0.20.0>,
<0.20.0>,
{erlang,register},
release_handler,
release_handler,
[],
[]]}
ancestors [sasl_sup,<0.18.0>]
messages []
links [<0.23.0>,<0.20.0>]
dictionary []
trap_exit false
status running
heap_size 610
stack_size 142
reductions 54
ok Search Reports
All reports containing a common pattern can be shown. Suppose a process crashes because it tries to call a non-existing function release_handler:mbj_func/1. The reports can then be shown as follows:
12> rb:grep("mbj_func").
Found match in report number 11
ERROR REPORT <0.24.0> 1996-10-16 16:16:21
===============================================================================
** undefined function: release_handler:mbj_func[] **
Found match in report number 10
ERROR REPORT <0.24.0> 1996-10-16 16:16:21
===============================================================================
** Generic server release_handler terminating
** Last message in was {unpack_release,hej}
** When Server state == {state,[],
"/home/dup/otp2/otp_beam_sunos5_p1g_7",
[{release,
"OTP APN 181 01",
"P1G",
undefined,
[],
permanent}],
undefined}
** Reason for termination ==
** {undef,{release_handler,mbj_func,[]}}
Found match in report number 9
CRASH REPORT <0.24.0> 1996-10-16 16:16:21
===============================================================================
Crashing process
pid <0.24.0>
registered_name release_handler
error_info {undef,{release_handler,mbj_func,[]}}
initial_call
{gen,init_it,
[gen_server,
<0.20.0>,
<0.20.0>,
{erlang,register},
release_handler,
release_handler,
[],
[]]}
ancestors [sasl_sup,<0.18.0>]
messages []
links [<0.23.0>,<0.20.0>]
dictionary []
trap_exit false
status running
heap_size 610
stack_size 142
reductions 54
Found match in report number 8
SUPERVISOR REPORT <0.20.0> 1996-10-16 16:16:21
===============================================================================
Reporting supervisor {local,sasl_sup}
Child process
errorContext child_terminated
reason {undef,{release_handler,mbj_func,[]}}
pid <0.24.0>
name release_handler
start_function {release_handler,start_link,[]}
restart_type permanent
shutdown 2000
child_type worker
ok Stop Server
Use function rb:stop() to stop the rb_server:
13> rb:stop(). ok
© 2010–2017 Ericsson AB
Licensed under the Apache License, Version 2.0.