Installing PHPUnit

Requirements

PHPUnit 4.8 requires PHP 5.3.3; using the latest version of PHP is highly recommended.

PHPUnit requires the dom and json extensions, which are normally enabled by default.

PHPUnit also requires the pcre, reflection, and spl extensions. These standard extensions are enabled by default and cannot be disabled without patching PHP's build system and/or C sources.

The code coverage report feature requires the Xdebug (2.1.3 or later) and tokenizer extensions. Generating XML reports requires the xmlwriter extension.

PHP Archive (PHAR)

The easiest way to obtain PHPUnit is to download a PHP Archive (PHAR) that has all required (as well as some optional) dependencies of PHPUnit bundled in a single file.

The phar extension is required for using PHP Archives (PHAR).

The openssl extension is required for using the --self-update feature of the PHAR.

If the Suhosin extension is enabled, you need to allow execution of PHARs in your php.ini:

suhosin.executor.include.whitelist = phar

To globally install the PHAR:

$ wget https://phar.phpunit.de/phpunit.phar
$ chmod +x phpunit.phar
$ sudo mv phpunit.phar /usr/local/bin/phpunit
$ phpunit --version
PHPUnit x.y.z by Sebastian Bergmann and contributors.

You may also use the downloaded PHAR file directly:

$ wget https://phar.phpunit.de/phpunit.phar
$ php phpunit.phar --version
PHPUnit x.y.z by Sebastian Bergmann and contributors.

Windows

Globally installing the PHAR involves the same procedure as manually installing Composer on Windows:

For Cygwin and/or MingW32 (e.g., TortoiseGit) shell environments, you may skip step 5. above, simply save the file as phpunit (without .phar extension), and make it executable via chmod 775 phpunit.

Verifying PHPUnit PHAR Releases

All official releases of code distributed by the PHPUnit Project are signed by the release manager for the release. PGP signatures and SHA1 hashes are available for verification on phar.phpunit.de.

The following example details how release verification works. We start by downloading phpunit.phar as well as its detached PGP signature phpunit.phar.asc:

wget https://phar.phpunit.de/phpunit.phar
wget https://phar.phpunit.de/phpunit.phar.asc

We want to verify PHPUnit's PHP Archive (phpunit.phar) against its detached signature (phpunit.phar.asc):

gpg phpunit.phar.asc
gpg: Signature made Sat 19 Jul 2014 01:28:02 PM CEST using RSA key ID 6372C20A
gpg: Can't check signature: public key not found

We don't have the release manager's public key (6372C20A) in our local system. In order to proceed with the verification we need to retrieve the release manager's public key from a key server. One such server is pgp.uni-mainz.de. The public key servers are linked together, so you should be able to connect to any key server.

gpg --keyserver pgp.uni-mainz.de --recv-keys 0x4AA394086372C20A
gpg: requesting key 6372C20A from hkp server pgp.uni-mainz.de
gpg: key 6372C20A: public key "Sebastian Bergmann <[email protected]>" imported
gpg: Total number processed: 1
gpg:               imported: 1  (RSA: 1)

Now we have received a public key for an entity known as "Sebastian Bergmann <[email protected]>". However, we have no way of verifying this key was created by the person known as Sebastian Bergmann. But, let's try to verify the release signature again.

gpg phpunit.phar.asc
gpg: Signature made Sat 19 Jul 2014 01:28:02 PM CEST using RSA key ID 6372C20A
gpg: Good signature from "Sebastian Bergmann <[email protected]>"
gpg:                 aka "Sebastian Bergmann <[email protected]>"
gpg:                 aka "Sebastian Bergmann <[email protected]>"
gpg:                 aka "Sebastian Bergmann <[email protected]>"
gpg:                 aka "Sebastian Bergmann <[email protected]>"
gpg:                 aka "[jpeg image of size 40635]"
gpg: WARNING: This key is not certified with a trusted signature!
gpg:          There is no indication that the signature belongs to the owner.
Primary key fingerprint: D840 6D0D 8294 7747 2937  7831 4AA3 9408 6372 C20A

At this point, the signature is good, but we don't trust this key. A good signature means that the file has not been tampered. However, due to the nature of public key cryptography, you need to additionally verify that key 6372C20A was created by the real Sebastian Bergmann.

Any attacker can create a public key and upload it to the public key servers. They can then create a malicious release signed by this fake key. Then, if you tried to verify the signature of this corrupt release, it would succeed because the key was not the "real" key. Therefore, you need to validate the authenticity of this key. Validating the authenticity of a public key, however, is outside the scope of this documentation.

It may be prudent to create a shell script to manage PHPUnit installation that verifies the GnuPG signature before running your test suite. For example:

#!/usr/bin/env bash
clean=1 # Delete phpunit.phar after the tests are complete?
aftercmd="php phpunit.phar --bootstrap bootstrap.php src/tests"
gpg --fingerprint D8406D0D82947747293778314AA394086372C20A
if [ $? -ne 0 ]; then
    echo -e "\033[33mDownloading PGP Public Key...\033[0m"
    gpg --recv-keys D8406D0D82947747293778314AA394086372C20A
    # Sebastian Bergmann <[email protected]>
    gpg --fingerprint D8406D0D82947747293778314AA394086372C20A
    if [ $? -ne 0 ]; then
        echo -e "\033[31mCould not download PGP public key for verification\033[0m"
        exit
    fi
fi

if [ "$clean" -eq 1 ]; then
    # Let's clean them up, if they exist
    if [ -f phpunit.phar ]; then
        rm -f phpunit.phar
    fi
    if [ -f phpunit.phar.asc ]; then
        rm -f phpunit.phar.asc
    fi
fi

# Let's grab the latest release and its signature
if [ ! -f phpunit.phar ]; then
    wget https://phar.phpunit.de/phpunit.phar
fi
if [ ! -f phpunit.phar.asc ]; then
    wget https://phar.phpunit.de/phpunit.phar.asc
fi

# Verify before running
gpg --verify phpunit.phar.asc phpunit.phar
if [ $? -eq 0 ]; then
    echo
    echo -e "\033[33mBegin Unit Testing\033[0m"
    # Run the testing suite
    `$after_cmd`
    # Cleanup
    if [ "$clean" -eq 1 ]; then
        echo -e "\033[32mCleaning Up!\033[0m"
        rm -f phpunit.phar
        rm -f phpunit.phar.asc
    fi
else
    echo
    chmod -x phpunit.phar
    mv phpunit.phar /tmp/bad-phpunit.phar
    mv phpunit.phar.asc /tmp/bad-phpunit.phar.asc
    echo -e "\033[31mSignature did not match! PHPUnit has been moved to /tmp/bad-phpunit.phar\033[0m"
    exit 1
fi
      

Composer

Simply add a dependency on phpunit/phpunit to your project's composer.json file if you use Composer to manage the dependencies of your project. Here is a minimal example of a composer.json file that just defines a development-time dependency on PHPUnit 4.8:

{
    "require-dev": {
        "phpunit/phpunit": "4.8.*"
    }
}

For a system-wide installation via Composer, you can run:

composer global require "phpunit/phpunit=4.8.*"

Make sure you have ~/.composer/vendor/bin/ in your path.

Optional packages

The following optional packages are available: