fish tutorial

Why fish?

fish is a fully-equipped command line shell (like bash or zsh) that is smart and user-friendly. fish supports powerful features like syntax highlighting, autosuggestions, and tab completions that just work, with nothing to learn or configure.

If you want to make your command line more productive, more useful, and more fun, without learning a bunch of arcane syntax and configuration options, then fish might be just what you're looking for!

Getting started

Once installed, just type in fish into your current shell to try it out!

You will be greeted by the standard fish prompt, which means you are all set up and can start using fish:

> fish
Welcome to fish, the friendly interactive shell
Type help for instructions on how to use fish
you@hostname ~> 

This prompt that you see above is the fish default prompt: it shows your username, hostname, and working directory.

• to change this prompt see how to change your prompt
• to switch to fish permanently see switch your default shell to fish

From now on, we'll pretend your prompt is just a '>' to save space.

Learning fish

This tutorial assumes a basic understanding of command line shells and Unix commands, and that you have a working copy of fish.

If you have a strong understanding of other shells, and want to know what fish does differently, search for the magic phrase unlike other shells, which is used to call out important differences.

Running Commands

fish runs commands like other shells: you type a command, followed by its arguments. Spaces are separators:

> echo hello world
hello world

You can include a literal space in an argument with a backslash, or by using single or double quotes:

> mkdir My\ Files
> cp ~/Some\ File 'My Files'
> ls "My Files"
Some File

Commands can be chained with semicolons.

Getting Help

fish has excellent help and man pages. Run help to open help in a web browser, and man to open it in a man page. You can also ask for help with a specific command, for example, help set to open in a web browser, or man set to see it in the terminal.

> man set
set - handle shell variables
  Synopsis...

Syntax Highlighting

You'll quickly notice that fish performs syntax highlighting as you type. Invalid commands are colored red by default:

> /bin/mkd

A command may be invalid because it does not exist, or refers to a file that you cannot execute. When the command becomes valid, it is shown in a different color:

> /bin/mkdir

fish will underline valid file paths as you type them:

> cat ~/somefi 

This tells you that there exists a file that starts with 'somefi', which is useful feedback as you type.

These colors, and many more, can be changed by running fish_config, or by modifying variables directly.

Wildcards

fish supports the familiar wildcard *. To list all JPEG files:

> ls *.jpg
lena.jpg
meena.jpg
santa maria.jpg

You can include multiple wildcards:

> ls l*.p*
lena.png
lesson.pdf

Especially powerful is the recursive wildcard ** which searches directories recursively:

> ls /var/**.log
/var/log/system.log
/var/run/sntp.log

If that directory traversal is taking a long time, you can Control-C out of it.

Pipes and Redirections

You can pipe between commands with the usual vertical bar:

> echo hello world | wc
       1       2      12

stdin and stdout can be redirected via the familiar < and >. stderr is redirected with a >2.

> grep fish < /etc/shells > ~/output.txt 2> ~/errors.txt

Autosuggestions

fish suggests commands as you type, and shows the suggestion to the right of the cursor, in gray. For example:

> /bin/hostname

It knows about paths and options:

> grep --ignore-case

And history too. Type a command once, and you can re-summon it by just typing a few letters:

> r<\@args{ync} \ ssh . [email protected]:/some/long/path/doo/dee/doo/dee/doo}

To accept the autosuggestion, hit → or Control-F. To accept a single word of the autosuggestion, Alt-→ (right arrow). If the autosuggestion is not what you want, just ignore it.

Tab Completions

fish comes with a rich set of tab completions, that work "out of the box."

Press Tab, and fish will attempt to complete the command, argument, or path:

> /pri @key{Tab} → /private/

If there's more than one possibility, it will list them:

> ~/stuff/s @key{Tab}
~/stuff/script.sh  (Executable, 4.8kB)  ~/stuff/sources/  (Directory)

Hit tab again to cycle through the possibilities.

fish can also complete many commands, like git branches:

> git merge pr @key{Tab} → git merge prompt_designer
> git checkout b @key{Tab}
builtin_list_io_merge (Branch) builtin_set_color (Branch) busted_events (Tag)

Try hitting tab and see what fish can do!

Variables

Like other shells, a dollar sign performs variable substitution:

> echo My home directory is $HOME
My home directory is /home/tutorial

Variable substitution also occurs in double quotes, but not single quotes:

> echo "My current directory is $PWD"
My current directory is /home/tutorial
> echo 'My current directory is $PWD'
My current directory is $PWD

Unlike other shells, fish has no dedicated syntax for setting variables. Instead it has an ordinary command: set, which takes a variable name, and then its value.

> set name 'Mister Noodle'
> echo $name
Mister Noodle

(Notice the quotes: without them, Mister and Noodle would have been separate arguments, and $name would have been made into a list of two elements.)

Unlike other shells, variables are not further split after substitution:

> mkdir $name
> ls
Mister Noodle

In bash, this would have created two directories "Mister" and "Noodle". In fish, it created only one: the variable had the value "Mister Noodle", so that is the argument that was passed to mkdir, spaces and all. Other shells use the term "arrays", rather than lists.

Exit Status

Unlike other shells, fish stores the exit status of the last command in $status instead of $?.

> false
> echo $status
1

Zero is considered success, and non-zero is failure.

Exports (Shell Variables)

Unlike other shells, fish does not have an export command. Instead, a variable is exported via an option to set, either --export or just -x.

> set -x MyVariable SomeValue
> env | grep MyVariable
MyVariable=SomeValue

You can erase a variable with -e or --erase

> set -e MyVariable
> env | grep MyVariable
(no output)

Lists

The set command above used quotes to ensure that Mister Noodle was one argument. If it had been two arguments, then name would have been a list of length 2. In fact, all variables in fish are really lists, that can contain any number of values, or none at all.

Some variables, like $PWD, only have one value. By convention, we talk about that variable's value, but we really mean its first (and only) value.

Other variables, like $PATH, really do have multiple values. During variable expansion, the variable expands to become multiple arguments:

> echo $PATH
/usr/bin /bin /usr/sbin /sbin /usr/local/bin

Note that there are three environment variables that are automatically split on colons to become lists when fish starts running: PATH, CDPATH, MANPATH. Conversely, they are joined on colons when exported to subcommands. All other environment variables (e.g., LD_LIBRARY_PATH) which have similar semantics are treated as simple strings.

Lists cannot contain other lists: there is no recursion. A variable is a list of strings, full stop.

Get the length of a list with count:

> count $PATH
5

You can append (or prepend) to a list by setting the list to itself, with some additional arguments. Here we append /usr/local/bin to $PATH:

> set PATH $PATH /usr/local/bin

You can access individual elements with square brackets. Indexing starts at 1 from the beginning, and -1 from the end:

> echo $PATH
/usr/bin /bin /usr/sbin /sbin /usr/local/bin
> echo $PATH[1]
/usr/bin
> echo $PATH[-1]
/usr/local/bin

You can also access ranges of elements, known as "slices:"

> echo $PATH[1..2]
/usr/bin /bin
> echo $PATH[-1..2]
/usr/local/bin /sbin /usr/sbin /bin

You can iterate over a list (or a slice) with a for loop:

> for val in $PATH
    echo "entry: $val"
  end
entry: /usr/bin/
entry: /bin
entry: /usr/sbin
entry: /sbin
entry: /usr/local/bin

Lists adjacent to other lists or strings are expanded as cartesian products unless quoted (see Variable expansion):

> set a 1 2 3
> set 1 a b c
> echo $a$1
1a 2a 3a 1b 2b 3b 1c 2c 3c
> echo $a" banana"
1 banana 2 banana 3 banana
> echo "$a banana"
1 2 3 banana

This is similar to Brace expansion.

Command Substitutions

Command substitutions use the output of one command as an argument to another. Unlike other shells, fish does not use backticks ` for command substitutions. Instead, it uses parentheses:

> echo In (pwd), running (uname)
In /home/tutorial, running FreeBSD

A common idiom is to capture the output of a command in a variable:

> set os (uname)
> echo $os
Linux

Command substitutions are not expanded within quotes. Instead, you can temporarily close the quotes, add the command substitution, and reopen them, all in the same argument:

> touch "testing_"(date +%s)".txt"
> ls *.txt
testing_1360099791.txt

Unlike other shells, fish does not split command substitutions on any whitespace (like spaces or tabs), only newlines. This can be an issue with commands like pkg-config that print what is meant to be multiple arguments on a single line. To split it on spaces too, use string split.

> printf '%s\n' (pkg-config --libs gio-2.0)
-lgio-2.0 -lgobject-2.0 -lglib-2.0
> printf '%s\n' (pkg-config --libs gio-2.0 | string split " ")
-lgio-2.0
-lgobject-2.0
-lglib-2.0

Separating Commands (Semicolon)

Like other shells, fish allows multiple commands either on separate lines or the same line.

To write them on the same line, use the semicolon (";"). That means the following two examples are equivalent:

echo fish; echo chips

# or
echo fish
echo chips

Combiners (And, Or, Not)

fish supports the familiar && and || to combine commands, and ! to negate them:

> ./configure && make && sudo make install

fish also supports and, or, and not. The first two are job modifiers and have lower precedence. Example usage:

> cp file1.txt file1_bak.txt && cp file2.txt file2_bak.txt ; and echo "Backup successful"; or echo "Backup failed"
Backup failed

As mentioned in the section on the semicolon, this can also be written in multiple lines, like so:

cp file1.txt file1_bak.txt && cp file2.txt file2_bak.txt
and echo "Backup successful"
or echo "Backup failed"

Conditionals (If, Else, Switch)

Use if, else if, and else to conditionally execute code, based on the exit status of a command.

if grep fish /etc/shells
    echo Found fish
else if grep bash /etc/shells
    echo Found bash
else
    echo Got nothing
end

To compare strings or numbers or check file properties (whether a file exists or is writeable and such), use test, like

if test "$fish" = "flounder"
    echo FLOUNDER
end

# or

if test "$number" -gt 5
    echo $number is greater than five
else
    echo $number is five or less
end

Combiners can also be used to make more complex conditions, like

if grep fish /etc/shells; and command -sq fish
    echo fish is installed and configured
end

For even more complex conditions, use begin and end to group parts of them.

There is also a switch command:

switch (uname)
case Linux
    echo Hi Tux!
case Darwin
    echo Hi Hexley!
case FreeBSD NetBSD DragonFly
    echo Hi Beastie!
case '*'
    echo Hi, stranger!
end

Note that case does not fall through, and can accept multiple arguments or (quoted) wildcards.

Functions

A fish function is a list of commands, which may optionally take arguments. Unlike other shells, arguments are not passed in "numbered variables" like $1, but instead in a single list $argv. To create a function, use the function builtin:

> function say_hello
     echo Hello $argv
  end
> say_hello
Hello
> say_hello everybody!
Hello everybody!

Unlike other shells, fish does not have aliases or special prompt syntax. Functions take their place.

You can list the names of all functions with the functions keyword (note the plural!). fish starts out with a number of functions:

> functions
alias, cd, delete-or-exit, dirh, dirs, down-or-search, eval, export, fish_command_not_found_setup, fish_config, fish_default_key_bindings, fish_prompt, fish_right_prompt, fish_sigtrap_handler, fish_update_completions, funced, funcsave, grep, help, history, isatty, ls, man, math, nextd, nextd-or-forward-word, open, popd, prevd, prevd-or-backward-word, prompt_pwd, psub, pushd, seq, setenv, trap, type, umask, up-or-search, vared

You can see the source for any function by passing its name to functions:

> functions ls
function ls --description 'List contents of directory'
    command ls -G $argv
end

Loops

While loops:

> while true
    echo "Loop forever"
end
Loop forever
Loop forever
Loop forever
...

For loops can be used to iterate over a list. For example, a list of files:

> for file in *.txt
    cp $file $file.bak
end

Iterating over a list of numbers can be done with seq:

> for x in (seq 5)
    touch file_$x.txt
end

Prompt

Unlike other shells, there is no prompt variable like PS1. To display your prompt, fish executes a function with the name fish_prompt, and its output is used as the prompt.

You can define your own prompt:

> function fish_prompt
    echo "New Prompt % "
end
New Prompt %  

Multiple lines are OK. Colors can be set via set_color, passing it named ANSI colors, or hex RGB values:

> function fish_prompt
      set_color purple
      date "+%m/%d/%y"
      set_color FF0
      echo (pwd) '>'
      set_color normal
  end
02/06/13
/home/tutorial > 

You can choose among some sample prompts by running fish_config prompt. fish also supports RPROMPT through fish_right_prompt.

$PATH

$PATH is an environment variable containing the directories in which fish searches for commands. Unlike other shells, $PATH is a list, not a colon-delimited string.

To prepend /usr/local/bin and /usr/sbin to $PATH, you can write:

> set PATH /usr/local/bin /usr/sbin $PATH

To remove /usr/local/bin from $PATH, you can write:

> set PATH (string match -v /usr/local/bin $PATH)

You can do so directly in config.fish, like you might do in other shells with .profile. See this example.

A faster way is to modify the $fish_user_paths universal variable, which is automatically prepended to $PATH. For example, to permanently add /usr/local/bin to your $PATH, you could write:

> set -U fish_user_paths /usr/local/bin $fish_user_paths

The advantage is that you don't have to go mucking around in files: just run this once at the command line, and it will affect the current session and all future instances too. (Note: you should NOT add this line to config.fish. If you do, the variable will get longer each time you run fish!)

Startup (Where's .bashrc?)

fish starts by executing commands in ~/.config/fish/config.fish. You can create it if it does not exist.

It is possible to directly create functions and variables in config.fish file, using the commands shown above. For example:

> cat ~/.config/fish/config.fish

set -x PATH $PATH /sbin/

function ll
    ls -lh $argv
end

However, it is more common and efficient to use autoloading functions and universal variables.

Autoloading Functions

When fish encounters a command, it attempts to autoload a function for that command, by looking for a file with the name of that command in ~/.config/fish/functions/.

For example, if you wanted to have a function ll, you would add a text file ll.fish to ~/.config/fish/functions:

> cat ~/.config/fish/functions/ll.fish
function ll
    ls -lh $argv
end

This is the preferred way to define your prompt as well:

> cat ~/.config/fish/functions/fish_prompt.fish
function fish_prompt
    echo (pwd) "> "
end

See the documentation for funced and funcsave for ways to create these files automatically.

Universal Variables

A universal variable is a variable whose value is shared across all instances of fish, now and in the future – even after a reboot. You can make a variable universal with set -U:

> set -U EDITOR vim

Now in another shell:

> echo $EDITOR
vim

Switching to fish?

If you wish to use fish (or any other shell) as your default shell, you need to enter your new shell's executable /usr/local/bin/fish in two places:

• add /usr/local/bin/fish to /etc/shells
• change your default shell with chsh -s to /usr/local/bin/fish

You can use the following commands for this:

Add the fish shell /usr/local/bin/fish to /etc/shells with:

>echo /usr/local/bin/fish | sudo tee -a /etc/shells

Change your default shell to fish with:

>chsh -s /usr/local/bin/fish

(To change it back to another shell, just substitute /usr/local/bin/fish with /bin/bash, /bin/tcsh or /bin/zsh as appropriate in the steps above.)

Ready for more?

If you want to learn more about fish, there is lots of detailed documentation, an official mailing list, the IRC channel #fish on irc.oftc.net, and the github page.