Qt for QNX
Supported Architectures and QNX Releases
From the perspective of an application development platform, Qt runs on top of QNX Neutrino RTOS. System integrators and application developers use a QNX SDP (Software Development Platform) which includes QNX Neutrino RTOS components for various targets and a full set of development tools.
Qt 5 is currently tested and supported on QNX SDP 7.0, with support for both 32-bit and 64-bit target architectures:
-
ARMle-v7
andx86
(32-bit) -
AArch64le
andx86-64
(64-bit)
Support for 64-bit architectures was added in QNX SDP 7.0.
Previous Releases
Older QNX SDP releases and other architectures may also work, but are not subject to regular builds and testing.
For a specific list of available boards, displays and input devices, contact QNX Software Systems ([email protected]) or KDAB ([email protected]). Qt on the QNX Neutrino OS is also supported by Qt for Device Creation, contact The Qt Company for more details.
Supported Modules
All the Qt Essentials modules are supported in Qt for QNX.
See Qt Add-Ons for information about which Qt Add-Ons modules are supported in Qt for QNX.
If you build Qt from a released source code distribution archive, the configure
tool ensures that the build will be made only for modules which are known to build for the target specified. Additionally, you can explicitly exclude unsupported or not needed modules from the build via the -skip <module>
option when running the configure
tool.
If you build Qt directly from the Git repository, you should initialize the repository only with modules which are supported or build and install modules separately. This helps to prevent unexpected build problems.
Build Requirements
Building Qt 5 requires the following packages available from the QNX website (registration required for access to downloads):
The compiler and other parts of the tool chain are provided in the SDP packages. You do not need any additional installations on your host PC. However, it is advisable to ensure that you can build Qt for the desktop target on the host as well. See Building Qt Sources for more details. All supported QNX Neutrino RTOS targets are fully integrated in the makespecs provided in the Qt sources.
You need to specify the target name for cross-compilation when configuring a Qt build:
Architecture | Configure cross-compilation target |
---|---|
ARMle-v7 (32-bit) |
./configure -xplatform qnx-armle-v7-qcc |
AArch64le (64-bit) |
./configure -xplatform qnx-aarch64le-qcc |
x86 (32-bit) |
./configure -xplatform qnx-x86-qcc |
x86-64 (64-bit) |
./configure -xplatform qnx-x86-64-qcc |
The configure
tool runs various tests to detect capabilities of the SDP and its add-ons. It sets related flags according the test results. Check the configure summary on the console or in ./qtbase/config.summary
if needed and set other flags manually as required.
Independent of the platform you are building for, consider using the -prefix
option with configure
as well, for example, -prefix<Qt-install-path>
. This specifies the target folder where Qt will be installed and places all build artifacts outside of the source code tree.
See Qt Configure Options for more details.
Qt Runtime Target Requirements
QNX Software Systems delivers software solutions for making embedded devices. This includes creation of QNX Neutrino RTOS boot images in a very flexible way. Even though QNX provides several reference scripts for the OS image creation, sooner or later you will need to make changes or you might decide to create an OS image from scratch. Qt relies on the existence of several third-party components and selected OS services. Due to this, QNX Neutrino RTOS boot images for a target device running Qt must meet a couple of requirements to ensure that Qt works as expected. The sections below list the crucial parts for Qt.
QNX Screen Graphics Subsystem
Before any Qt application can be started, the QNX Screen Graphics Subsystem (also called just "Screen") must be running. The Screen consists not only of a driver, but also includes several utilities and other services which are used by Qt. This includes processing of mouse and keyboard events as well. You can ensure that the Screen is configured and running correctly by verifying that a graphics application, like gles2-gears
, can be started and runs without problems. Most of the recent sample OS build scripts in the SDP include sections with all components and start commands for the Screen. Use them as a reference.
IPv6 Support
Qt's networking stack requires IPv6 support to be enabled, independent of whether the actual networking uses IPv4 or IPv6. That means, that io-pkt-v6-hc
must be running, not io-pkt-v4
.
Random Device /dev/random
Qt requires /dev/random
to be present and functional. Start it before starting any Qt application or during the system startup:
random -p waitfor /dev/random
System Logger
QNX provides the slog2 logging framework tailored to specifics of embedded systems. The major advantage of it is a much better performance than a text output to files. Qt uses this framework by default for any logging output going through QDebug on QNX Neutrino RTOS. The slog2
service should be started during the system startup. The slog2
also relies on the existence of the /tmp
folder which has to be configured as well, for example:
[type=link] /tmp=/dev/shmem display_msg "Starting slogger2..." slogger2 -U1001:1000 & waitfor /dev/slog2
Environment Variables
There is a set of environment variables you should set when starting a Qt application. Most of them are actually not specific to QNX Neutrino RTOS. They are still mentioned here, since knowing them just saves a lot of time in case of problems.
Qt Runtime Location
If you did not build Qt with RPATH enabled, you can place the Qt runtime components in any folder in the file system. The following environment variables should point to valid locations assuming that the Qt installation is located in <Qt-install-path>
:
-
LD_LIBRARY_PATH
should contain the path to the Qt libraries in<Qt-install-path>/lib
-
QT_PLUGIN_PATH
defines where the Qt plug-ins are located. It should be set to<Qt-install-path>/plugins
-
QML2_IMPORT_PATH
defines where the Qt Quick plug-ins are located. It should be set to<Qt-install-path>/qml
- If Qt does not use fontconfig, you must either provide the path to the fonts with
QT_QPA_FONTDIR
, or place the fonts under<Qt-install-path>/lib/fonts
which is the default font location.
Physical Screen Size
Qt needs information about the physical dimensions of the attached display to determine DPI values and thus set correct font sizes. Usually, this information is provided by the Screen. In some cases you may see an invalid screen size such as 0mmx0mm. In such a case Qt requires an environment variable QQNX_PHYSICAL_SCREEN_SIZE
set to according values to get the required information. If Qt applications exit with an error message saying that the physical screen size couldn't be determined, set the variable like this before starting the Qt application:
export QQNX_PHYSICAL_SCREEN_SIZE=150,100
to inform Qt that the screen has a width of 150mm and a height of 100mm in this particular case. The physical screen size is measured in millimeters (mm) and should correspond to the actual physical size of the display in the final configuration.
Troubleshooting the First Start of a Qt Application
The only drawback of the flexibility provided by QNX Neutrino RTOS is a risk that the run environment is slightly different on your target than what is expected by Qt. This is a common reason why a Qt application on a new target fails to start. A few generic environment variables can help locate the root cause for problems:
- Setting
QT_DEBUG_PLUGINS
to1
helps to see why the QPA plugin cannot load. - Setting
LD_DEBUG
to1
helps to see where and how shared libraries are loaded. This can be used in combination withQT_DEBUG_PLUGINS
when a plugin failed to load because it could not load other shared libraries. - Setting
QT_LOGGING_TO_CONSOLE
will force sending all logging messages tostderr
instead ofslog2
. This is useful for analyzing application startup problems, as you do not need to use another tool to see the messages.
Third Party Libraries
Make sure that your system image contains the following additional 3rd-party libraries which are not always included in minimal QNX Neutrino RTOS images:
libfontconfig
libfreetype
libiconv
libicui18n
libicudata
libicuuc
libpng14
libxml2
libsqlite3
libssl
libcrypto
Note: This is not a complete list of shared libraries used by Qt on QNX Neutrino OS. Multiple shared libraries are already available in a typical OS image, or included by other parts of the system, for example, the Screen
.
Accessing Environment Variables
setconf
and getconf
are required to access POSIX environment variables, especially for the host name and time and date.
Qt Creator Target Requirements
A QNX Neutrino RTOS target used for development with Qt Creator should provide a few additional command line tools and services.
SSH
Deployment and remote application startup relies on SSH. The SSH daemon (sshd
) must be installed and running during the system startup. Please note that it requires /dev/random
which was already mentioned. It also expects specific access rights to be set correctly to its configuration files. The latter makes it impossible starting SSH from a file system which does not have full access rights support, for example, FAT.
SCP and SFTP
scp
and sftp
utilities are used by Qt Creator for deployment and should be available on the target. Additionally, inetd
daemon has to be started at the system startup which then launches according services, including FTP when needed.
QNX Tools for Remote Debugging
Remote debugging requires the pdebug
(process-level debugger) to be running on the development device. It is usually started by the qconn
process which also provides various process information to Qt Creator. Generally, Qt Creator uses the same remote debugging interfaces as the QNX Momentics IDE provided in the SDP. See the related QNX documentation for more details.
Other Utilities on the Target Device
QNX provides board support packages (BSPs) for many common platforms and their individual variants. However, if you need a BSP for a board that QNX does not provide, you can modify an existing one or develop your own.
When you develop a BSP for your board, you should include the following utilities to enable Qt Creator to deploy, run, debug, and stop applications on QNX devices:
awk
cat
cut
df
grep
kill
ln
mkdir
netstat
print
printf
ps
read
sed
sleep
slog2info
tail
tar
zip
uname
unzip
The utilities need to be in a standard location, such as /bin
or /usr/bin
. Alternatively, you can use the ~/.ssh/environment
file to set variables for remote commands, such as PATH
. In addition, you must set enable PermitUserEnvironment
in the SSH Daemon configuration.
Run the test when you configure a new target device in Qt Creator to verify that all required components are available and running.
For more information about modifying or developing a BSP for you board, see Customizing a BSP in the QNX developer documentation.
Deployment Destination Folder
Qt Creator deploys an application to the target device before starting it remotely. On most embedded devices, it is just copying application binaries and related data files to a folder on the target device. However, there is no standard for how this folder is called and where it is located. Quite a few configurations use /tmp
for this, which is often mapped to a RAM disk. This can cause some confusion as deployed applications disappear on the next device shutdown.
Another popular target is /opt
. This folder is located in a read-only partition on many systems, making deployment impossible. Make sure that you use a destination folder which meets your needs. You can set it in the install.path
variable in the .pro
file of your project, see Installing Files in the qmake documentation for more details.
© The Qt Company Ltd
Licensed under the GNU Free Documentation License, Version 1.3.
https://doc.qt.io/qt-5.13/qnx.html